Denon 2310CI User Manual
New model information
AVR-2310CI
AV Surround Re ceiver
A/V Surround Receiver featuring Dolby TrueHD,
DTS-HD Master Audio and Multi Room functionality that enhances
your level of entertainment enjoyment.
The AVR-2310CI is a versatile A/V surround receiver with a 7.1-channel surround amp that supports Dolby True HD
and DTS-HD Master Audio decoding. The AVR-2310CI provides a Graphical User Interface (GUI) that lets you check the
unit’s status in color for easier operation. The AVR-2310CI is also equipped with a variety of Denon technologies such
as Direct Mechanical Ground Construction and Minimum Signal Paths for faithful reproduction of HD sound and HD
picture quality.
Features
New features
• High bit i/p converter and scaler up to 1080p featuring Anchor Bay VRS processing
-Multi cadence detection for SD and HD video signals
-Digital noise reduction and enhancer
• Dolby Pro Logic IIz processing
• 5 x HDMI in / 1 x HDMI out (Repeater and Scaler)
• Sleep timer function
• On-Board GUI via HDMI output
State-of-the-art Denon Solutions for Maximizing Content Quality
• Identical quality and power for all 7 channels, 105 W x 7ch
• Stable power supply for high-quality sound and picture playback
• Compressed Audio Restorer to enhance digital music les
• Dolby TrueHD and DTS-HD Master Audio decoders
• Denon’s high picture quality circuitry, to enhance enjoyment of existing DVDs
Connectivity & Future-ready Expandability
• Sirius satellite radio ready
• Power ampli er assign for zone 2
Ease-of-use
• Audyssey Dynamic Volume, for real-time volume adjustment
• Audyssey MultEQ Auto setup and Room EQ room acoustic correction system
• Three Quick Select Buttons
• Pre-memory main remote control unit + zone remote control unit included
Custom Integration
• AMX, Crestron third party IP control support with RS-232C port
• 150mA Trigger output
• IR Remote in/out ports
•
State-of-the-art Denon Solutions for
Maximizing Content Quality
• High-bit I/P Converter and Scaler up to 1080p
The AVR-2310CI features state-of-the-art Anchor Bay
Technologies ABT-2010 VRS precision 12-bit video
deinterlacing and upconversion that processes SD sources
such as DVD and converts them to HD (high definition)
quality for improved sharpness and clarity. Now you can enjoy
not only your DVDs but also your VCR tapes and standard
Direct Mechanical Ground Construction, embodying
concepts for thorough vibration resistance
Vibration-resistant construction has been reviewed to thoroughly
suppress the adverse influences of vibration on sound quality.
The power transformers, a source of vibration, have been
securely mounted on the highly rigid bottom chassis.
mounting of cast-iron feet to the radiator in near proximity to
each other serves to suppress mutual vibration with the power
transformers and other sources of vibration.
definition (480i/480p) games with much greater clarity and
detail. And, the ABT VRS technology includes both SD as well as
• Digital / analog separate transformer windings
HD video noise reduction to mimimize compression artifacts.
• Analog to HDMI up-conversion, I/P converter
and scaler on HDMI to HDMI
Analog video input signals (composite, S-video, component) are
converted to digital video signals and transmitted to the HDMI
output port. Digital video signals are sent to the HDMI output
even when multiple HDMI devices such as a video camera or a
game console are connected to the AVR-2310CI. One HDMI cable
is all that’s needed to connect the AVR-2310CI to a TV (monitor).
• Compressed Audio Restorer to enhance
digital music les
Connectivity & Future-ready Expandability
• Power Amp Assign function, for versatility in
using the AVR-2310CI for di erent purposes
The AVR-2310CI supports up to 7.1 channels (FL/ FR/ C/ SL/ SR/
SBL/ SBR/ SW) for surround playback defined by the Blu-ray
disc format. To enjoy surround playback with the AVR-2310CI’s
• Dolby Pro Logic IIz processing
Dolby Pro Logic IIz introduces a new dimension to home theater
entertainment through the addition of a pair of front height
channels. Compatible with stereo, 5.1 and 7.1 content, Dolby
Pro Logic IIz provides enhanced spaciousness, depth and
dimension to movies, concert video and video game playback
while maintaining the full integrity of the source mix.
Dolby Pro Logic IIz, you can reassign the power amp from the
two surround back channels (SBL/SBR) to the two front height
channels (FLH/FRH). Or by assigning the SBL/SBR power amp to
Zone 2, you can enjoy multi-room audio playback, or to achieve
higher-quality sound for 2-channel stereo playback, you can
con gure the AVR-2310CI for front bi-amp operation. These are
just some of the ways you can arrange the AVR-2310CI’s amps to
suit various listening styles.
•
Minimum Signal Path for clear audio and video signal
The “simple and straight” design concept has been thoroughly
implemented in the signal paths to contribute to immaculately
clean audio and video playback.
Signal paths are as short as
• Audio/video playback and control for iPod with op-
tional dock (ASD-11R/3N/3W)
possible to keep signal degradation in the audio and video
circuitry to an absolute minimum.
Main Speci cations
Power ampli er section Preampli er section
Rated output
Front L/R 105 W + 105 W Frequency response
Center 105 W Tuning frequency range 87.5 - 107.9 MHz
Surround L/R 105 W + 105 W Tuning frequency range 520 - 1710 kHz
Surround Back L/R 105 W + 105 W Power supply AC 120 V, 60 Hz
*THD gures are power amp stage values. Input sensitivity/impedance
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) S/N Ratio 100 dB
135 W + 135 W
(6 ohms, 1 kHz, THD 0.7%) FM section
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) Usable sensitivity 1.0 μV (11.2 dBf)
135 W
(6 ohms, 1 kHz, THD 0.7%) AM section
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) Usable sensitivity 18 μV
135 W + 135 W
(6 ohms, 1 kHz, THD 0.7%) General
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) Power consumption 6.0 A (Standby 0.3 W)
135 W + 135 W Dimensions (W x H x D) 434 x 171 x 377 mm
(6 ohms, 1 kHz, THD 0.7%) 17-3/32” x 6-47/64” x 14-27/32”
Weight 11.3 kg
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
(IHF-A weighted, DIRECT mode)
24 lbs 14.6 oz
Direct
Ease-of-use
•On-Board GUI via HDMI output
The AVR-2310CI is equipped with an easy-to-view Graphical
User Interface (GUI) featuring visual menu displays. These
menu displays can also be output to the monitor over HDMI.
•
Audyssey Dynamic Volume, for real-time volume adjustment
Audyssey Dynamic Volume constantly monitors the sound
sources and adjusts the volume to the optimum level for the
particular source being heard without sacri cing dynamic range.
The AVR-2310CI is also equipped with Audyssey MultEQ
which measures the acoustic characteristics of the room to
obtain the optimum acoustic effects, and Dynamic EQ which
reproduces the high and low range with the optimum acoustic
effect during low volume levels. Dynamic Volume combines
these two functions to achieve maximum performance.
• MultEQ Auto setup and room acoustic correction
-Tower type microphone for more accurate measuring
-Up to six measurement points
-
High level resolution lters for satellite speakers and also subwoofer
• Auto surround mode
•
Audio Delay function (max. 6 frames or 200 mSec)
• Muting level settings (Full/-40dB/-20dB)
• Audio level memory, capable of correcting dif-
ferent signal levels for each input device
• Variable subwoofer crossover switching
Ports
In HDMI x 5
Out HDMI Monitor x 1
Component x 2
S-Video x 3
Composite (Video) x 4
Analog Audio (Tuner included) x 8
Analog EXT. Input 7.1ch
Digital Optical x 2
Digital Coaxial x 2
Component Monitor x 1
Composite Monitor (Monitor / DVR) x 2
Analog Audio REC x 2
Analog Audio (Zone2) x 1
Audio Preout (SW) x 1
Digital Optical x 1
Phones x 1
Denon Electronics (USA), LLC.
100 Corporate Drive, Mahwah, New Jersey 07430 USA
TEL: 201-762-6500
usa.denon.com
Denon Canada Inc.
505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1
TEL: 905-475-4085
ca.denon.com
Other Microphone Port x 1
*Design and speci cations are subject to change without notice.
*“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
*DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and
DTS-HD Master Audio are trademarks of DTS, Inc.
*HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
*Audyssey MultEQ
Audyssey Dynamic EQ™ is a trademark of Audyssey Laboratories.
Audyssey Dynamic Volume™ is a trademark of Audyssey Laboratories.
*iPod® is a trademark of Apple Inc., registered in the U.S. and other countries.
Denon Brand Company
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
Kanagawa, 210-8569, Japan
www.denon.com
Dock Control Port x 1
FM Tuner Antenna x 1
AM Tuner Antenna x 1
Sirius Connector x 1
RS-232C x 1
Remote Control In/Out In 1 / Out 1
DC12V 150mA MAX. trigger out x 1
®
is a registered trademark of Audyssey Laboratories.
17610509 A
Loading...