Page 1
MultiChoice® Universal Pressure Balance Tub and
Shower with Diverter Valve for Dual Showers
Specification: (example)
o R10700-UNWS ROUGH-IN only
• Concealed in-wall MultiChoice® Universal valve
• Back-to-back capability,
•
Heavy Duty forged brass valve body,
• 1/2" Universal inlets to accept 1/2" copper,
1/2" iron pipe, PEX or CPVC adaptors
• 1/2" Male thread inlets/outlets
• In-wall diverter valve
Integral screwdriver stops
T13H923
o T13H _ _ _ - _ _ _ FINISH TRIM ONLY:
• Pressure balancing cartridge with checks
• Polished chrome plated finish
• ADA compliant diverter handle
• Non-removeable red/blue temperature markings
and … with … (add product variation)
with … (add shower)
with … (add valve handle)
Engineer/Architect Approval
Model Specifi ed:
Approval: Date:
TUB AND SHOWER DESCRIPTION PRODUCT NO.
ROUGH-IN with Diverter Valve & Stops R10700-UNWS
FINISH TRIM only T13H
PRODUCT VARIATION
SHOWER
4 4 4
Specify “0”
0 0 0
When No Shower
Outlet Required
®
HANDLE
1 11
Shower, Handshower
with 2 Check Vlaves,
Diverter Valve,
610mm (24") S/S Bar
with ADA Slide
3-Function Touch-Clean
Showerhead, Arm &
2 22
Set Screw Flange
Showerhead, Arm &
Set Screw Flange
3 33
®
85mm (3.33")
Metal Lever
Handle
57mm (2.24")
Lever Blade
Handle
44
55
30° Vandal Resistant
Cast Wallmount
66
Showerhead
77
H2Okinetic Technology
Showerhead, Arm &
88
Set Screw Flange
Tub & Shower
(Same as No. 3
above) but with
Diverter Spout
See DSP-B-R10000-HDF for additional Rough-In options.
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifi cations and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for fi nish options and product availability.
99
®
SHOWER FLOW RATES
SHOWER #
Handshower
in PV #3
Handshower
in PV #9
2
3
6
8
DSP–T13H3 Rev. I Page 2.C.7
ACTUAL
@ 45 PSI
(310 kPa)
1.13 gpm
(4.3 L/min)
1.13 gpm
(4.3 L/min)
1.7 gpm
(6.4 L/min)
1.13 gpm
(4.3 L/min)
1.4 gpm
(5.3 L/min)
1.5 gpm
(5.7 L/min)
DSP–T13H3 Rev. I
MAXIMUM
@ 80 PSI
(552 kPa)
1.5 gpm
(5.7 L/min)
1.5 gpm
(5.7 L/min)
2.0 gpm
(7.6 L/min)
1.5 gpm
(5.7 L/min)
1.5 gpm
(5.7 L/min)
1.5 gpm
(5.7 L/min)
Page 2
MultiChoice® Universal Pressure Balance Tub
610mm
(24.0")
(32.0")
OPTIONAL
813mm
OPTIONAL
m
51mm
(2.0")
OPTIONAL
910mm
(36.0")
610mm
(24.0")
(32.0")
OPTIONAL
813mm
(3.213"- 3.613")
82-92mm
(0.813")
21mm
OUTLET
L
C
(3.0")
76mm
508mm
OPTIONAL
152mm
(6.0")
(2.75")
70mm
910mm
(36.0")
OPTIONAL
INLET
C
L
(3.0")
(20.0")
SECOND INLET
PLUG FOR
1/2" F. I.P.
(12.0")
OPTIONAL
305mm
2 OUTLETS
TO SHOWER
1/2" F. I.P.
INLET/OUTLET
INLET
FRO
AIN
A L E
HOT COLD
INLETS
STOPS
ET AL LEER
HANDLE
R10700-UNWS
R10700-UNWS
L
C
A LE OD
and Shower with Diverter Valve for Dual Showers
Approvals:
• ASME A112.18.1/CSA B125.1
•
Indicates compliance to
ICC/ANSI A117.1
• Pressure Balance Valve ASSE 1016
•
Handshower back flow
protection provided by
two integral certified check valves in series, which
operate independently,
ASME A112.18.3
( Contact Delta Representative for State and/or
Local Approvals.)
70mm
®
FLOW RATE vs PRESSURE
FLOW
(L/min.)
Shower Outlet Flow Rates
13
12
11
10
9
8
7
6
5
4
3
2
1
0
10 20 30 40 50 60 70 80
Line Pressure (psig)
Shower Outlets
No. 2
No. 8
Product Variations
No. 3 & 9
No. 3 & 6
FLOW
(gpm)
3.5
3
2.5
2
1.5
1
.5
00
ET AL LEER
HANDLE
FLOW RATE vs PRESSURE
FLOW
(L/min.)
Tub Filler Flow Rates
29.5
28
26.5
25
23.5
22
20.5
19
17.5
16
14.5
13
20 30 40 50 60 70 80
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Page 2.C.8 DSP–T13H3 Rev. I
DSP–T13H3 Rev. I
Line Pressure (psig)
FLOW
(gpm)
8
7.5
7
6.5
NOTE FOR SHOWER #6: Not for use as an anti-ligtature device.
6
PAUSE WARNING – FOR SHOWER #5
Plumbing Codes require that showerheads and handshowers provide a small but continuous flow
5.5
of water (trickle) when in “PAUSE” mode. Because of this continuous flow, in certain circumstances
pressure variations in the water line and/or changes in the position of the shower temperature control
5
handle while in “PAUSE” mode could result in dramatic changes to the temperature of the water when
4.5
the shower head or hand shower is returned to the “ON” position.
ALWAYS point the shower head away from yourself when returning to the “ON” position and feel the
4
water with your hand before resuming your shower to ensure the water flow is not too hot or too cold.
DO NOT allow children or others who might not understand this warning to use the “PAUSE” function.
3.5
3 11.5
Note: Measurements may vary ± 6mm (0.25")
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
(2.75")
152mm
(6.0")
76mm
(3.0")
(3.0")
INLET
FRO
AIN
A L E
INLET
51mm
(2.0")
STOPS
121mm
(4.75")
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
R10700-UNWS Rough-In
with
T13H932 Trim
82-92mm
(3.213"- 3.613")
PLUG FOR
SECOND INLET
2 OUTLETS
TO SHOWER
R10700-UNWS
C
OUTLET
L
C
L
21mm
(0.813")
R10700-UNWS
HOT COLD
INLETS
1/2" F. I.P.
44-66mm
(1.75"-2.50")
1/2" F. I.P.
INLET/OUTLET
C
A LE OD
L
OPTIONAL
508mm
(20.0")
OPTIONAL
305mm
(12.0")
910mm
(36.0")
OPTIONAL
TO FLOOR
910m
(36.0")
FRONT VIEWSIDE VIEW
117mm
(4.6")
76mm
76mm
(3.0")
(3.0")
OPTIONAL
OPTIONAL
INLET
WALL SHOWER
OUTLET
229mm
(9.0")
:
HAND SHOWER
OUTLET
813mm
(32.0")
OPTIONAL
178mm
(7.0") Ø
76mm
(3.0")
P/B VALVE INLETS
1/2" Universal inlets accept 1/2" copper,
1/2" Iron pipe, PEX or CPVC adaptors
1/2" Male thread inlets/outlets
DIVERTER VALVE:
1/2" FIP inlets/outlets
610mm
(24.0")
Page 3
T13H Series Tub and Shower
Add-On Options
DESCRIPTION ADD-ON NUMBER
T13H Tub/Shower Add-On Options
HOSE
–
SIDE BAR
4 4
Always use “0” if NO selection is
0 0
required from this column
1753 mm (69")
Long CP Stainless Steel Hose –
Stretches to 92" (2337 mm)
(See Note 1)
4
Always use “0” if NO selection is
required from this column
11
22
33
4
A number from the Hose and Slide Bar columns
must always be selected, even if it is “0”.
®
914mm (36")
S/S Slide Bar
5
(See Note 2)
Note:
(1) Base Product for the HOSE, ETC. option must be from PRODUCT VARIATION TRIM No.’s 3 or 9
(2) Base Product for S/S Slide Bar must be from PRODUCT VARIATION TRIM No.’s 3 or 9
Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP-T13H3 Rev. I Page 2.C.7
DSP–T13H3 Rev. I
Loading...