Page 1
3530-LHP
®
®
U
P
C
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
Submitted Model No.: _____________________________________________
Specific Features: ________________________________________________
6" to 16"
enters
1/8" (29 mm)
1
Max. Deck
hickness
T
1/2"
2
(64 mm)
7 5/8"
(194 mm)
1/2"-14 NPSM
Suffix WF and LHP Models Only
C
" (25 mm)
1
ia.
D
Flexible Hose
Connection
3/8" O.D.
Copper Tubing
2 1/4"
57 mm)
(
Dia.
(61 mm)
3 3/8"
(86 mm)
2
3/8"
1
(
1/8" (29 mm)
Dia.
2 1/8"
(54 mm)
Dia.
5 1/4"
134 mm)
1 5/8"
(42 mm)
to
2 3/8”
(61 mm)
1 3/8"
(35 mm)
Dia.
LAVATORY
FAUCETS
■ Innovations®Series
■ Two Handle Widespread Deck Mount
■ 3 Hole Sink Applications
■ 6" to 16" Centers
■ Quick-Snap
STANDARD SPECIFICATIONS:
• Solid brass fabricated end valve and
spout bodies.
• Widespread - 6" (152mm) to
16" (406 mm) centers.
• 5 1/4" (133 mm) long, 3 7/8" (98 mm)
high, rigid spout.
• Quick-Snap
• LHP - Less Handle Program. See handle
options below.
• 1/4 turn handle stops.
• Hot and cold stems are interchangeable.
• Control mechanism is the rotating
cylinder type with stainless steel plate and
180° rotation, with replaceable non-metallic
seats operating in stainless steel lined sockets.
• 3/8" O.D. copper supply tubes.
• Models with suffix “WF” and “LHP” supplied
with 1/2"-14 NPSM adapters.
• Models have metal drain with pop-up type
fitting with plated flange and stopper.
• Maximum flow rate 1.5 gpm @ 60 PSI.
WARRANTY
• Lifetime Faucet and Finish Limited Warranty to the
original consumer purchaser to be free from
defects in material and workmanship.
• 5 Year Limited Warranty for usage in all industrial,
commercial and business applications.
®
Installation
®
installation.
Available LHP Handle Options
H24▲
3 1/4"
(83 mm)
H27▲
(32 mm)
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.specselect.com for finish options and product availability.
DSP-L-3530 Rev. E
H25▲
H212▲
1 1/4"
2 5/16"
(59 mm)
3"
(76 mm)
4 5/8"
(118 mm)
H26▲
1 1/4" (32 mm) Dia.
CCOOMMPPLLIIEESS WWIITTHH:
•
ASME A112 .18 .1 / CSA B125.1
•
ASME A112 .18 .2 / CSA B125.2
Indicates compliance to
ICC/ANSI A117.1
•
EPA Water Sense
•
ASTM F409 (for non-metallic drain)
:
Available LHP Handle
Accent Options with
Matching Lift Rod
1 1/4"
(32 mm)
H215▲
2 5/16"
(59 mm)
Knobs
A24▲
55 E. 111th Street, Indianapolis, Indiana 46280
395 Matheson Blvd. E., Mississauga, ON L4Z 2H2
© 2008 Masco Corporation of Indiana
1.D.22
Loading...