COMPLIES WITH:
•
ASME A112.18.1M-1996
•
ASSE 1016-1996
•
CSA B125-93
•
Showerhead GSA A-A-240
Indicates ADA compliance to
CABO/ANSI A117.1-1992
•
ASSE Seal Authorized
•
City of L.A. approved
•
CSA Certified
•
IAPMO Listed
BATH MIXING
VALVES
■ Tub/Shower (1748 Series)
■ Single Handle
■ Monitor
®
with Scald-Guard®Valve
■ Pressure Balance
■ Volume Controlled with Lever Handle
■ Temperature Controlled with Dial
Submitted Model No.: _____________________________________________
Specific Features: ________________________________________________
STANDARD SPECIFICATIONS:
• Requires 1
1
⁄
2
" (38 mm) wall cavity.
•
Back-to-back installation capability.
• Solid brass fabricated body.
•
Monitor
®
with Scald-Guard®valve.
Maintains a balanced pressure of hot
and cold water even when a valve is
turned on or off elsewhere in the system.
• Lever volume control handle; temperature
adjustment dial.
• Field adjustable to limit dial rotation
into hot water zone.
•
Maximum dial rotation adjustable
between 90° and 180°.
• Red and Blue graphics indicate
hot/cold temperature adjustment.
1748
1748-MDS
2" (50.8 mm)
C/L Supply
Lines
If recessed, the escutcheon
screws may need to be shortened.
Plus or minus 1/2" (12.7 mm)
- B -
Cover must be removed prior
to installation of trim.
Inlets
8" (203 mm) Min.-
18" (457 mm) Max.
7 1/2"
(190.5 mm)
A
Dimensions
A
I.P.S. or C.W.T. 2
1
/2
" (63.5 mm)
I.P.S. or C.W.T. w/stops 5
1
/2
" (139.7 mm)
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
2.D.17
U
P
C
®
®
0 69 138 207 276 345 414 483 552 621
6
5
4
3
2
1
0
Flow (U.S. Gallons Per Minute)
0 102030405060708090
Pressure (kPa)
Tub Filler
Showerhead
Pressure (PSI)
22.7
Flow (Liters Per Minute)
18.9
15.1
11.4
7.6
3.8
0
A72CL
A72, A72PB,
A72WH
Standard
Features
Washerless ◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆
Scald-Guard®Valve ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
Back-to-Back Installation ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
1
⁄
2
"
I.P.S. Inlets and Outlets
◆◆◆ ◆◆◆◆
1
⁄
2
"
C.W.T. Sweat Inlets and Outlets
◆◆◆◆◆◆ ◆◆◆◆
Replaceable Cartridge ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
Adjustment Rotational Limit Stop ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
Matching Finish Temperature Adjustment Dial ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
Volume Control Clear Lever Handle*
Chrome Volume Control Brass Lever Handle*
White Volume Control Brass Lever Handle*
Metal Shower Arm and Flange ◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆
Non-Metallic Touch-Clean®Showerhead/1 Spray Pattern
◆◆◆◆◆ ◆ ◆◆◆◆◆ ◆
Non-Metallic Dual Spray Touch-Clean®Showerhead/2 Spray Patterns
◆◆ ◆ ◆◆
Non-Metallic Tub Filler w/Pull-Down Diverter
◆◆◆◆◆◆◆◆◆◆◆
Metal Tub Filler w/Pull-Down Diverter
◆◆
Metal Tub Filler w/Pull-Up Diverter
◆◆ ◆◆
Screwdriver Stops ◆◆◆ ◆◆◆ ◆
Chrome Finish ◆◆◆◆◆ ◆ ◆◆◆◆◆ ◆
Brilliance
™
Polished Brass Finish
◆◆ ◆
White Finish
◆◆
DSP-B-1748 Rev. A
1748
1748-BRS
1748-BRSMDS
1748-C
1748-CBRSMDS
1748-CPB
1748-CPBWS
1748-CSOS
1748-CWHBRS
1748-CWSBRS
1748-CWSMDS
1748-CWSSOS
1748-MDS
1748-PB
1748-WHBRS
Available Options for Field Conversion: ▲=Specify Finish
• Screwdriver Stops. Order two RP5876s for IPS or two RP6005s for C.W.T.
• Shower Arm. Order RP6023▲.
• Shower Flange. Order RP6025▲.
• Non-metallic Push-CleanTMshowerhead/1 spray pattern. Order RP28599▲.
• Non-metallic Touch-Clean®showerhead/1 spray pattern. Order RP28600▲.
• Non-metallic Dual Spray Touch-Clean
®
showerhead/2 spray patterns. Order RP28601▲.
• Non-metallic Ultimate Touch-Clean
®
showerhead/3 spray patterns. Order RP28602▲.
• Brass shower arm diverter for hand shower. Order RP4239 (chrome only).
• Personal hand shower with 24" vertical bar, 60" hose. Order RP7245 (chrome only).
• Personal hand shower with 24" vertical bar, 60" hose, vacuum breaker and wall supply elbow. Order RPW1111HDF (chrome only).
• Personal handshower with 60" hose, vacuum breaker and wall supply elbow. Order RPW2222HDF (chrome only).
• Metallic tub filler with pull-down diverter for 1/2" C.W.T. or 1/2" I.P.S. Order RP17454▲.
• Non-metallic tub filler with pull-down diverter for 1/2" C.W.T. or 1/2" I.P.S. Order RP17453 (chrome only).
• Non-metallic slip-on tub filler with pull-down diverter for 1/2" C.W.T. Order RP5836 (chrome only).
• Metallic slip-on tub filler with pull-down diverter for 1/2" C.W.T. Order RP19581PB (Brilliance ™ polished brass only).
• Metallic tub filler with pull-up diverter for 1/2" C.W.T. or 1/2" I.P.S. Order RP7533▲.
• Non-metallic tub filler with pull-up diverter for 1/2" C.W.T. or 1/2" I.P.S. Order RP5834(chrome only).
• Non-metallic slip-on tub filler with pull-up diverter for 1/2" C.W.T. Order RP19820 (chrome only).
• Metallic over-the-rim tub filler for 1/2" I.P.S. Order RP5833▲.
• Metallic over-the-rim slip-on tub filler for 1/2" C.W.T. Order RP5835 (chrome only).
• Bath waste assemblies and bath accessories also available separately.
2 1/2"
(64 mm)
2 1/2"
(64 mm)
5 1/4"
(133 mm)
5"
(127 mm)
2 1/2"
(64 mm)
5"
(127 mm)
2 1/2"
(64 mm)
4 3/4"
(121 mm)
RP5836
RP17453
RP17454
▲
RP19581PB
RP5834
RP7533
▲
RP5833▲
RP5835
RP19820
3 7/16"
(87 mm)
3 1/2"
(89 mm)
Full Spray
Massage
Spray
Soft
Aerated
Spray
2"
(51 mm)
2 1/2"
(64 mm)
3 1/2"
(89 mm)
4 3/8"
(111 mm)
3 7/16"
(87 mm)
4"
(102 mm)
RP28600▲
Touch-Clean®Showerhead
RP28599
▲
Push-CleanTMShowerhead
RP28602
▲
Ultimate Touch-Clean
®
Showerhead
RP28601
▲
Dual Spray Touch-Clean
®
Showerhead
1748-CWS
1748-WS
*Handle Accents
Indianapolis, Indiana 46280
A Division of Masco Corporation of Indiana
© 2001 Masco Corporation of Indiana