Delta 10GBASE-SR XFP Optical Transceiver TSP-10G3A1EER Specification Sheet

TSP-10G3A1EER
DELTA ELECTRONICS, INC.
1 Revision: S3
04/10/2007
www.deltaww.com
10GBASE-SR XFP Optical Transceiver
RoHS compliant
850nm Vertical Cavity Surface Emitting Laser
(VCSEL) light source
Standard LC duplex fiber-optic connector
Compliant with XFP MSA
I
2
C for integrated Digital Optical Monitoring
Power consumption <1.37 W
User friendly Plug-and-play style "Hot Swap"
Small footprint which enables high board
density
XFI high speed I/O electrical interface
Integrated signal conditioner to extend
200mm FR4 PCB trace signaling
Description
The TSP-10G3A1EER is a hot pluggable
10Gbps small form factor transceiver module
integrated with the high performance 850nm
VCSEL transmitter, high sensitivity PIN receiver
and signal conditioner for 10Gbps applications.
It is compliant with the INF-8077i XFP
Multi-source Agreement (MSA).
The TSP-10G3A1EER is designed to be
compliant with INF-8077i XFP Multi-source
Agreement (MSA) with five digital monitoring
functions: Temperature, Vcc, Tx optical power,
TX laser bias current and RX received optical
power.
Application
10G LAN switch
10G Ethernet switch/router
10G Fiber channel
SAN applications
TSP-10G3A1EER
DELTA ELECTRONICS, INC.
2 Revision: S3
04/10/2007
www.deltaww.com
1. Absolute Maximum Ratings
Parameter Symbol Min Typ Max Units Notes
Storage Temperature TS -40 85 °C
Storage Ambient Humidity HA 5 90 %
+5V Power Supply V
CC5
0 6.0 V
+3.3V Power Supply V
CC3
0 3.6 V
2. Recommended Operating Conditions
Parameter Symbol Min Typ Max Units Notes
Operating Ambient Temperature
T
A
0 70 °C
Ambient Humidity HA 5 85 % [1]
+3.3V Power Supply V
CC3
3.135 3.3 3.465 V
+5V Power Supply V
CC5
4.75 5 5.25 V
+3.3V Supply Current I
VCC3
270 350 mA
+5V Supply Current I
VCC5
10 30 mA
Total Power Dissipation PD 1.37 W
Differential TX Data Input TD+ - TD- 150 500 1000 mVp-p [2,3]
Differential RX Data Output RD+ - RD- 500 650 800 mVp-p [4]
Notes:
1. Non-condensing
2. The data rate of input data is 10.3125Gb/s
3. Input voltage swing (differential) measured peak-to-peak
4. Output voltage swing (differential) measured peak-to-peak
ASIC / SerDes
XFP
ASIC / SerDes
XFP
10Gbps optical signal 10Gbps XFI electrical signal 10Gbps XFI electrical signal
Application Block Diagram
TSP-10G3A1EER
DELTA ELECTRONICS, INC.
3 Revision: S3
04/10/2007
www.deltaww.com
3. Optical Transmitter Characteristics (T
A
=0 ºC to 70 ºC)
Parameter Symbol Min Typ Max Units Notes
Data Rate R 10.3125 Gb/s Signaling speed variation from nominal
±
100
ppm
Average Output Power P
avg
-5 -1.8 dBm
Wavelength
λ
840 860 nm Spectral Width RMS 0.45 nm Transmitter OFF Output Power P
off
-30 dBm Extinction Ratio ER 3.7 dB Optical Modulaion Amplitude OMA Compliant with Minimum OMA relation table dBm Relative Intensity Noise
RIN12OMA
-128
dB/Hz
Optical Return Loss Tolerance
ORLT
12
dB
Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3}
{0.25, 0.40, 0.45, 0.25, 0.28, 0.40}
Transmitter eye mask definition
Minimum optical modulation amplitude (dBm) relation table
Up to
0.05
0.05 to
0.1
0.1 to
0.15
0.15 to
0.2
0.2 to
0.25
0.25 to
0.3
0.3 to
0.35
0.35 to
0.4
0.4 to
0.45
840 to 842 -4.2-4.2-4.1-4.1-3.9-3.8-3.5-3.2-2.8
842 to 844 -4.2-4.2-4.2-4.1-3.9-3.8-3.6-3.3-2.9
844 to 846 -4.2-4.2-4.2-4.1-4.0-3.8-3.6-3.3-2.9
846 to 848 -4.3-4.2-4.2-4.1-4.0-3.8-3.6-3.3-2.9
848 to 850 -4.3-4.2-4.2-4.1-4.0-3.8-3.6-3.3-3.0
850 to 852 -4.3-4.2-4.2-4.1-4.0-3.8-3.6-3.4-3.0
852 to 854 -4.3-4.2-4.2-4.1-4.0-3.9-3.7-3.4-3.1
854 to 856 -4.3-4.3-4.2-4.1-4.0-3.9-3.7-3.4-3.1
856 to 858 -4.3-4.3-4.2-4.1-4.0-3.9-3.7-3.5-3.1
858 to 860 -4.3-4.3-4.2-4.2-4.1-3.9-3.7-3.5-3.2
Center
Wavelength
(nm)
RMS Specrtal width (nm)
TSP-10G3A1EER
DELTA ELECTRONICS, INC.
4 Revision: S3
04/10/2007
www.deltaww.com
Triple tradeoff curve
4. Optical Receive Characteristics
(TA=0 ºC to 70 ºC)
Parameter Symbol Min Ty p Max Units Notes
Signaling speed (nominal) Ts 10.3125 Gb/s Signaling speed variation from nominal
±
100
ppm
Center Wavelength
λ
840 860 nm Overload PO -1 dBm Receiver sensitivity in OMA RSO -11.1 dBm [1] LOS De-assert LOSD -13 dBm LOS Assert LOSA -30 dBm [2]
LOS Hysteresis
LOS
D
–LOS
A
0.5
dB
Receiver Reflectance
-12 dB
[3] Stressed Receive sensitivity OMA
-7.5
dBm
Notes:
1. Measured by reference TX with 4.75dB extinction ratio at
12
10
BER
2. When LOS asserted, the data output is Low-level (fixed)
3. When the terminal is viewed from the optical path, the reflection toward the optical path of the optical signal with a central wavelength of 840nm to 860nm transmitted to terminal.
Loading...
+ 8 hidden pages