Delonghi TRD40615ECA, TRD40615EBKCA Instruction manuals

Page 1
De’Longhi Appliances
via Seitz, 47
31100 Treviso Italia
Printed in China
5711010611/05.13_00
Page 2
Instructions for use. Keep these instructions
Mode d’emploi. Conservez cette notice
Instrucciones para el uso
Repase y guarde estas instrucciones
antes de usar su aparato
OIL FILLED RADIATOR RADIATEUR ÉLECTRIQUE À BAIN D’HUILE RADIADOR ELÉCTRICO DE BAÑO DE ACEITE
TRD4 0615ETRD4 0615EL
Visit www.delonghiregistration.com
to register your product on-line.
Visit www.delonghi.com for a list of service centers near you.
Visitez www.delonghiregistration.com
pour enregistrer votre produit en ligne.
Visitez www.delonghi.com pour y voir une liste des
centres de réparation proches de chez vous.
ELEC TRIC CHAR ACTERIST ICS  CAR ACTÉRISTIQUES ÉLECTRI QUES  CAR ACTERIST ICAS ELECTRI CAS
120 V~ 60 Hz 1500 W
Visite www.delonghiregistration.com para registrar su producto en línea. Visite www.delonghi.com para ver la lista de centros de servicios cercanos a usted.
Page 3
2
Page 4
3
Description/Descripción
A
B
C
D
H
E
F
G
I
L
Page 5
4
Important safeguards
en
INTRODUCTION
Thank you for choosing a De'Longhi product. Please take a few minutes to read these instructions. This will avoid all risks and damage to the appliance.
IMPORTANT SAFEGUARDS
When using any electrical appliance, some basic safety precautions should always be observed to reduce the risk of re, electric shock, and/or injury to persons. Specically:
- Read all instructions carefully before using the appliance.
- If your radiator is equipped with a polyethylene tape used as a carry handle, remove it before connecting appliance to the outlet.
- This appliance gets very hot when in use. To pre­vent burns, do not touch hot surfaces with bare skin. Use the handle when moving the appliance. Keep all ammable materials, such as furniture, pillows, bedding, paper, clothing, and curtains at least 3 feet (90 cm) from the front and top of the appliance, also avoid contact with the sides and back.
- The appliance is not intended for use by persons (including children) with reduced physical, sen­sory or mental capabilities, or lack of experience and knowledge, unless they have been given su­pervision or instruction concerning use of the ap­pliance by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
- Extreme caution is necessary when any heater is used by or near children or invalids and whene­ver the heater is left operating and unattended.
- Always disconnect the plug from the power out­let when the appliance is not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
If heater has leaked any oil, discontinue using
the heater and contact the service centre as in-
dicated in the instruction leaet. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
- Do not use the appliance outdoors.
- This heater is not intended for use in bathrooms, laundry areas, or similar indoor locations. Never position the appliance where it may fall into a bathtub or come in contact with water.
- Do not run the power cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Keep the cord away from any passageways where it could be tripped over.
- To completely turn o the appliance, push the ON/OFF button, and then unplug the heater.
- Connect to properly polarized outlets only.
- Do not wrap the cord around the appliance im­mediately after use.
- Do not insert or allow foreign objects to get into the air intake or air outlet grille, as this may cause electric shock or re, or damage the appliance.
- To prevent a possible re, do not block air intake or air outlet grille in any way. Do not use the ap­pliance on soft surfaces, such as beds, where the openings may become blocked.
- Do not cover the appliance while it is functioning in order to avoid overheating and the risk of re.
- The internal parts of the appliance can become very hot or produce sparks during operation. Do not use the appliance in areas where gasoline, paints, or other ammable liquids are used or stored.
- Use this appliance only as described in this ma­nual. Any other use not indicated by the manu­facturer may cause re, electric shock, or injury to persons.
- To prevent current overload and blown fuses, make sure that no other appliance is plugged into the same outlet or into another outlet wired into the same circuit.
- It is normal for heater’s plug and cord to feel warm to the touch. However, an excessively hot or deformed plug or cord is not normal and may be the result of a defective electrical outlet. De-
Page 6
5
Description/Use
en
fective outlets must be replaced before using the heater. Plugging the heater into a worn outlet may result in overheating of the power cord or may cause the risk of re.
- If the power cord is damaged, to reduce the risk of malfunction it must be replaced by the ma­nufacturer, its service agent, or a licensed and qualied professional.
- Do not use this appliance with an extension cord or outlet strip. Connect the appliance directly to a suitable outlet.
- Make sure that the plug is fully inserted into the outlet. Wall outlets may deteriorate with time, so check the plug periodically for signs of overheating or deformation. If the outlet has de­teriorated, stop using it and have it repaired.
- Check that neither the appliance nor the power cord have been damaged during shipping.
- Make sure that no styrofoam or other packing materials remain in the appliance.
- Make sure that no pieces of polystyrene or other packaging material have been left between one element of the appliance and another.
It may be necessary to pass over the appliance
with a vacuum cleaner.
- The rst time the appliance is used, run it at the maximum power for at least two hours. During this time, ventilate the room thoroughly to eli­minate the “new” smell released by the applian­ce. It is completely normal for the appliance to emit “creaking” sounds the rst time it is run.
- CAUTION: To prevent electric shock, make sure the wide prong of the plug is inserted in the wide slot of the outlet.
- Do not place the heater near a bed because objects such as pillows or blankets can fall o the bed and be ignited by the heater.
- Extreme caution is necessary whenever the hea­ter is left operating unattended.
- Do not open the appliance. No user-serviceable parts inside.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY
DESCRIPTION
A Display B On-o button C Power setting button D + Adjustment button E - Adjustment button F
Timer button
G Brightness button H Eco button I Cord holder L Wheel
USE
"Easy wheel" system
Turn the radiator upside down on a rug or a soft surface in order to prevent damaging the paint nish. Fully unfold the wheels by turning them outwards (Fig. 1). Turn the radiator back to its upright position.
Fig. 1
Location
The heater must not be placed immediately below a power outlet. Do not use this radiator in rooms having a surface area of less than 43 square feet (4 sq.m.).
Power connection
The radiator must be connected to a properly polarized A/C 110/120 V household outlet in perfect working condition. The appliance will be set in the o condition. The display will show the or bedding, furniture and ammable material away from the power outlet where the heater is plugged in. After an interruption of the power supply (power failure or appliance unplugged) the unit goes always to o. When the unit is switched on by pressing the on-o button, the operating conditions will be same ones previously set.
symbol. Keep loose clothing
Page 7
6
Your product is equipped with a polarized alternating current line plug (a plug having one prong wider than the others). This plug will t into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to t, contact your electrician to replace your obsolete outlet. Do not attempt to modify the plug to bypass this safety feature.
Heating function
To turn the appliance on, press the (B) button. Press button (C) to set the required power level: MIN ( ); MED ( ); MAX ( ). To select the desired temperature, press button + or - (E or D). By pushing the + or - button once, the temperature (shown on the display) will increase or decrease by 1°F or 1°C. Holding the + or - button depressed the value will increase o decrease rapidly.
The appliance allows to set a temperature of 41°F (5°C) and a range from 50°F to 82°F (10°C to 28°C).
Anti-freeze function
Setting the temperature to 41°F (5°C), the appliance will activate the Antifreeze function. The display will show the symbol, in this way the appliance will turn on automatically, at the max power, only if the room temperature falls below 41°F (5°C), to prevent freezing conditions. If you wish to go back to the Heating function, press the "+" button once.
Note: in this function the power level settings are not able to be adjusted, unit will run at MAX.
Eco function
When this function is active the appliance automatically sets the most appropriate power level to guarantee optimum comfort while reducing energy consumption. To activate this function press the "ECO" (H) button. The display will show
symbol. If the selected temperature is much higher then the actual room temperature, the appliance will start automatically and rapidly to heat the room. The appliance will automatically select the most convenient power level ( If MAX power level has been selected using the the appliance will cycle between: MAX-MED-MIN-OFF. If MED power level has been selected, the appliance will cycle
MAX-MED-MIN-OFF).
button,
Use
MED-MIN-OFF.
between: If MIN power level has been selected, the appliance will cycle between:
MIN-OFF.
Working indicator
The symbol indicates the heating status by means of its colors.
RED: the unit is heating at the maximum power. YELLOW: the unit is heating at the medium power. GREEN: the unit is heating at the minimum power. absent: the unit is not heating.
Brightness of the display
The appliance allows two dierent brightness settings for the display. The highest is active when any key button is pressed. After a few seconds of keyboard inactivity, the brightness will decrease to the operating brightness level. This lower level can be adjusted by means of the light button
(G). Press the light button repeatedly till the desired
brightness is reached (three brightness levels available).
Key lock
In order to avoid accidental operation, you can lock the keyboard using the keylock function. To activate this function press buttons + and - together for at least 3 seconds. The display shows the symbol double acoustic signal will be emitted. To disactivate the function proceed in the same way.
Timer function
This function can be activated in two dierent ways. Delayed start: With the appliance o, press the timer button (F) . The symbol is displayed ashing together with the hours left before the appliance comes on. Change the hours using the + and - buttons, then wait a few seconds for the program to be stored. The display will return to o and the When the programmed time has elapsed, the appliance will come on with the previous settings.
Delayed stop: with the appliance on, press the timer button
. The symbol is displayed ashing together with the hours left before the appliance goes o. Change the hours using the + and - buttons, then wait a few seconds for the
symbols remains on.
en
and a
Page 8
7
Safety device/Maintenance/Troubleshooting
program to be stored. The current settings and symbol are displayed. At the end of the set time the appliance switches o automatically. To go back to operating without the timer, press the timer button twice. The timer symbol
Note: the time is settable from 0.5 to 24 hours.
disappears from the display.
(High temperature)
When the product’s internal temperature is too high, the heating power will progressively and automatically be reduced. The display shows the internal temperature is lowered. To remove the cause of this alarm check that the unit is not covered or obstructed.
en
intermittently till
Change of the temperature scale
The display can show the temperature in both °F and °C. To select the desired temperature scale, when the unit is in o position least 10 seconds, then release. The change of scale will be indicated by two short beeps.
, press and hold the "+" and "ECO" keys for at
Alarms
The appliance has a diagnostic system that makes it possible to signal malfunctions. In case of problems, the display will show an alarm message:
(Probe failure) With this alarm the appliance does not
operate. Contact the De'Longhi Customer Service.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The appliance doesn't work
- Be sure it is plugged in and that the electrical outlet is working.
- Check for any obstruction.
SAFETY DEVICE
A safety device switches the heater o in the event of overheating. Please call the De Longhi customer service.
MAINTENANCE
Always remove the plug from the power outlet and allow the radiator to cool. Wipe radiator with a soft damp cloth, do not use detergents and abrasives. Should the radiator not be in use over a certain length of time, wind the cord around the cord holder and store it in a dry place. This appliance has been built to give many years of trouble free service. In case of malfunction or doubt, do not try to repair the heater by yourself: this may result in a re hazard or electric shock. Call the De'Longhi Customer Service.
TECHNICAL CHARACTERISTICS
Power supply See rating plate Absorbed power
- Plug into the power outlet.
- Remove the obstruction and let the appliance cool down. If the appliance doesn't work please contact the De'Longhi Customer Service
.
The display shows: Ht (High temperature)
- The temperature may be set too low.
-
Probe failure, the display shows: PF
- The unit is covered or obstructed.
- Set the temperature to a higher position.
-
Contact the De'Longhi Customer Service.
- Check that the unit is not covered or obstructed. When the product internal temperature decreases the alarm will disappear.
Loading...