De'Longhi GB-5711410531 Owner's Manual

instructions
FAN HEATER
HVF3533
Please retain these instructions for future reference
2
Fan Heater HVF3533
Description of Appliance
Wall Mounting Installation
300 mm MIN300 mm MIN
157,5 mm
Fig. 2
Fig. 1
Thermostat
Swivelling base (certain models only)
Pedal switch (certain models only)
Indicator light
Timer (certain models only)
Function selector
3
Thank you for choosing this De’Longhi appliance. To get the best results from your new heater please read these instructions carefully before use. This should ensure optimum results and maximum safety.
SAFETY WARNINGS
• The first time you use the appliance, operate it for at least 15 minutes with the thermostat at maximum to eliminate the “new” smell. A little smoke due to the protective substances applied to the heating element before transport may be given off. This is completely normal and not a cause for concern.
• Do not rest the power cable on the appliance.
• Always use the heater in a vertical position only.
• Do not obstruct the hot air outlet grilles or the air intake grille at the top or the bottom of the appliance.
• If the power cable is damaged, it must be replaced by the manufacturer or an authorised service centre in order to eliminate all risk.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of expe­rience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Do not use this appliance in rooms measuring less than 4m
2
. You should avoid positioning it in currents of air which could disturb operation of the heater.
• The heater must be positioned 50cm from furniture or other objects.
• As with any electrical appliance, whilst the instructions aim to cover as many eventualities as possible, caution and common sense should be applied when operating your appliance, particularly in the vicinity of young children.
• This appliance is intended only for a domestic use. A safety device trips and turns the appliance off in the event of overheating or if it is placed in strong currents of air. To reset, unplug the appliance from the mains socket and leave to cool down (about five minutes), remove the cause of overheating, plug back into the mains and turn on again. A number of models are fitted with a special device which turns power off if the appliance is tipped over, sloped or knocked. If this occurs, you will hear a beep.
WARNING: In order to avoid overheating, never under any circumstances cover the appliance during operation.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as an external timer, or connected to a circuit that is regularly switched on and off by the utility.
Fan Heater HVF3533
Loading...
+ 5 hidden pages