Page 1
De’Longhi Dishwasher
Model
DEDW654FI
© 2014 De’Longhi Australia Pty Ltd.
USER GUIDE
Please read this user guide carefully and retain for future reference
Page 2
Contents
Parts and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
De’Longhi Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . 04
Dishwasher Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 05
Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 07
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
- Cabinet Preparation
- Aesthetic fascia panel dimensions and installation
- Tension adjustment of the door
- Cold Water Connection
- AquaStop Anti-Flood Protection
- Drain Hose Connection
- Positioning the Appliance
- Levelling
- Securing the Dishwasher
Notes
Using your Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
- Quick start guide
- Before Starting the Dishwasher
- Prior to using for the first time
- Rinse aid & detergent
- Loading the Dishwasher Baskets
- Starting a Washing Program
- Control Panel
- Menu description
- Turning on the Appliance
- Change the Program
- Forget to add a Dish?
- At the end of the Wash Cycle
Care and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
- Filtering System
- Filter Assembly
- Cleaning the Filter
- Caring for the Dishwasher
- Protect against Freezing
- Cleaning the Spray Arms
- How to keep your Dishwasher in shape
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Help us Help You. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Page 31Page 2
Page 3
Warranty Information Parts and Features
The De’Longhi Dishwasher is warranted against faults
resulting from manufacturing or material defects. The
warranty period for normal domestic installation and use is
two years from the date of purchase. In non-domestic use
De’Longhi limits the voluntary warranty to 6 months.
De’Longhi undertakes to repair or replace the Dishwasher
at our discretion if the product is found to be defective due
to a manufacturing fault during the warranty period.
This warranty excludes any damage caused by misuse,
neglect, shipping accident, or incorrect installation.
Normal wear and tear is also expressly excluded. The
warranty claim is void if no fault is found with the product
or if work is carried out by anyone other than an authorised
De’Longhi Service Agent.
In Australia, this warranty is additional to the conditions
and guarantees which are mandatory as implied under the
Trade Practices Act 1974 and State and Territory
legislation.
How to contact us about a warranty claim
Talk to a De’Longhi representative for further warranty
or product information please call the number in your
country:
Australia
www.delonghi.com.au
Phone: 1800 126 659
New Zealand
www.delonghi.co.nz
Phone: 0508 200 300
Model: DEDW654FI
1
2
3
7
4
5
6
8
9
11
Components:
Top Spray Arm 7. Cup Shelf
1.
2. Cutlery Rack 8. Spray Arms
3. Upper Basket 9. Filter Assembly
4. Inner Pipe 10. Inlet Pipe Connector
5. Lower Basket 11. Drain Pipe
6. Dispenser 12. Adjuster
550 (with the door closed)
598
815
10
12
Dimensions:
Height 815mm
Width 598mm
Depth 550mm (with door closed)
Voltage connected Load: see rating label
Water pressure: 0.04-1.0MPa
Power supply: see rating label
Capacity: 15 place settings
NOTE: Warranty is determined by unit serial number and
date of purchase.
1150
Page 3Page 30
Page 4
De’Longhi’s Safety Precautions Help us Help You
De’Longhi pride themselves on their innovative range
of the highest quality consumer products.
De’Longhi ensures all of its products are 100% safe
through quality design and manufacture. All products
meet or exceed stringent laboratory-tested safety
requirements.
It is necessary for anyone using an electrical appliance
to be safety conscious. The following precautions are
essential for the safe use of an electrical appliance.
Carefully read all of the instructions provided with your
appliance:
Always turn the power off at the power outlet before
Ÿ
you insert or remove a plug. Remove by grasping
the plug, do not pull on the cord.
Do not use your appliance with an extension cord
Ÿ
unless this cord has been checked and tested by a
qualified technician or service person. The
extension cord must be a VDE-Listed, 3-wire
grounding extension cord that has a grounding
plug and outlet and that the electrical rating of the
cord is 220-240 volts and at least 10 amperes.
Always use your appliance from a power outlet of
Ÿ
the voltage (A.C. only) marked on the appliance.
Do not use an appliance for any purpose other than
Ÿ
its intended use.
Do not attempt to repair an electrical appliance.
Ÿ
Return a damaged or malfunctioning appliance to a
qualified service centre for adjustment or repair if
required.
The appliance must be positioned so the AC plug is
Ÿ
accessible.
This appliance is designed exclusively for
Ÿ
household use. All other uses are strictly forbidden.
The appliance is not intended for use by persons
Ÿ
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
If the power cable is damaged, it must be replaced
Ÿ
by the manufacturer, an authorised service centre
or a qualified electrician in order to eliminate all risk.
This appliance is intended to be used in household
Ÿ
and similar applications such as:
- staff kitchen areas in shops, offices and other
working environments;
- farm houses;
- by clients in hotels, motels and other residential
type environments;
- bed and breakfast type environments.
Read this guide carefully, it is intended to help you
operate and maintain your new Dishwasher properly.
Keep it handy to answer your questions. If you don't
understand something or you need more assistance,
please call the De’Longhi Helpline.
To help us provide prompt answers to your queries,
please record your Dishwasher model and serial
numbers. You’ll find them on a plate located on the
rear outside wall of the Dishwasher.
Dishwasher details
Before you call for service
Check the Troubleshooting Section on page 27. It lists
causes of minor operating problems that you can
correct yourself.
Page 29Page 4
Page 5
Troubleshooting
Problem Possible Causes Solution
The di shes
are no t clean
The di shes were not
load ed correctl y.
Dishwasher Safety Precautions
See no tes in " Lo ad ing the D is hwasher B askets ".
Clou diness
on gla ssware
Unsatisfactory washing result
Black or gray
marks on dish es
Dete rgent lef t in
disp enser cup s
The di shes are
not dr yin g
Unsatisfactory
drying results
The prog ram was
not po werful en ough.
Not en ough dete rgent
was di spensed .
Item s are blockin g
the pa th of spr ay a rms.
The fi lter comb ination
in t he b ase of wa sh
cabi net is not cl ean or
is n ot c orrectly fi tted.
This m ay cause
the sp ray arm j et s
to g et b locked.
Comb ination o f soft
wate r and too m uc h
dete rgent.
Alum inum uten sils have
rubb ed agains t dishes.
Dish es block
dete rgent cup s.
Improp er loadin g
Too li ttle rins e- aid
Dish es are removed
too so on
Wrong progra m
has be en select ed
Use of c utlery wi th
a lo w- quality c oating
Sele ct a more inten sive progra m.
See" Wash Cy cle Table ".
Use mo re d etergen t, or chang e your dete rgent.
Rear range the i tems so tha t the spray c an rotate freel y.
Clea n and/or fi t the filte r combina tion correc tly.
Clea n the spray a rm jets. Se e "Cleani ng the Spra y
Arms ".
Use le ss deterg ent if you ha ve soft w at er and se le ct
a sh or ter cycle t o wash th e gl assware and t o get
them c lean.
Use a mi ld abra si ve cleane r to elimin ate those m arks.
Re-l oading th e dishes prop erly.
Load t he dishwa sher as sug gested in t he directio ns.
Increa se the amou nt of rinse -aid/refill t he rinse- aid
disp enser.
Do n ot e mpty yo ur d ishwash er immedi ately aft er
wash ing. Open t he door sli ghtly so th at the stea m can
esca pe. Begin u nloadin g the dishw asher onl y once t
he d is hes are barely wa rm to the tou ch. Empty t he low
bask et first. T his prevent s water for m drop ping off
dish es in the u pp er basket .
In s ho rt program th e washing t emperat ure is l ower.
This a lso lower s cleanin g perform ance. Cho ose
a progra m with a long w ashing ti me.
Water drai na ge is more di ffic ult with th ese items .
Cutl ery or dish es of this ty pe are not suit able for
wash ing in the di shwashe r.
ERROR CODES
When some malfunctions occur, the appliance will display error codes to warn you:
Codes Meanings Possible Causes
Error 1 Longer inlet time. Faucet is not opened, or water intake is restricted, or water
pressure is too low.
Error 4 Overflow Some element of dishwasher leaks.
Error 8 Failure of diverter valve. Open circuit or break of diverter valve.
Error C Fault of PCB data transmission. PCB failure
Your safety and the safety of others is very important.
Safety messages are displayed in this manual and on
your appliance.
Read and obey these safety messages as they will alert
you to potential hazards and tell you how to reduce the
chance of injury.
DANGER
WARNING
CAUTION
Safety Alert Symbol
This symbol alerts you to potential hazards.
Danger
Danger indicates a high level of risk to yourself and others.
Ensure that care is taken to avoid severe injury or even
death.
Warning
Warning indicates a moderate level of risk to yourself, others
and the product. Ensure that care is taken to avoid extensive
product damage or serious injury.
Caution
Caution indicates a level of risk to yourself, others and the
product. Ensure care is taken to avoid moderate product
damage or injuries.
WARNING!
If overflow occurs, turn off the main water supply before calling service.
Ÿ
If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting
Ÿ
the dishwasher.
Page 5Page 28
Page 6
Dishwasher Safety Precautions
Troubleshooting
Before the appliance is used, it must
be properly positioned and installed
as described in this manual, so read
the manual carefully. To reduce the
risk of fire, electrical shock or injury
when using the appliance, follow
basic precaution, including the
following:
DANGER
Grounding Instructions
This appliance must be grounded. In the event of a
Ÿ
malfunction or breakdown, grounding will reduce
the risk of an electric shock by providing a path of
least resistance of electric current. This appliance is
equipped with a cord having an equipmentgrounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all
local codes and ordinances.
Improper connection of the equipment-grounding
Ÿ
conductor can result in the risk of an electric shock.
Check with a qualified electrician or service
Ÿ
representative if you are in doubt whether the
appliance is properly grounded. Do not modify the
plug provided with the appliance; If it does not fit
the outlet. Have a proper outlet installed by a
qualified electrician.
WARNING
Do not abuse, sit on, or stand on the door or dish
Ÿ
rack of the dishwasher.
Do not touch the heating element during or
Ÿ
immediately after use. (This instruction is only
applicable to machines with a visual heating
element.)
Do not operate your dishwasher unless all
Ÿ
enclosure panels are properly in place. Open the
door very carefully if the dishwasher is operating,
there is a risk of water squirting out.
Do not place any heavy objects on or stand on the
Ÿ
door when it is open. The appliance could tip
forward.
When loading items to be washed:
Ÿ
1. Locate sharp items so that they are not likely to
damage the door seal;
2. Warning: Knives and other utensils with sharp
points must be loaded in the basket with their
points down or placed in a horizontal position.
Check that the detergent compartment is empty
Ÿ
after completion of the wash cycle.
WARNING
When using your dishwasher, you should prevent
Ÿ
plastic items from coming into contact with the
heating element (This instruction is only applicable
to machines with a visual heating element).
Do not wash plastic items unless they are marked
Ÿ
dishwasher safe or the equivalent. For plastic items
not so marked, check the manufacturer's
recommendations.
Use only detergent and rinse additives designed for
Ÿ
an automatic dishwasher.
Never use soap, laundry detergent, or hand
Ÿ
washing detergent in your dishwasher. Keep these
products out of the reach of children.
Keep children away from detergent and rinse aid,
Ÿ
keep children away from the open door of the
dishwasher, there could still be some detergent left
inside.
This appliance is not intended for use by persons
Ÿ
(including children )with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
Ÿ
do not play with the appliance.
The dishwasher must always be connected to the
Ÿ
water system using new hose sets.
Dishwasher detergents are strongly alkaline, they
Ÿ
can be extremely dangerous if swallowed. Avoid
contact with skin and eyes and keep children away
from the dishwasher when the door is open.
The door should not be left open, since this could
Ÿ
increase the risk of tripping.
If the supply cord is damaged, it must be replaced
Ÿ
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Remove the door to the washing compartment
Ÿ
when removing an old dishwasher from service or
discarding it.
Please dispose of packing materials properly.
Ÿ
Use the dishwasher only for its intended function.
Ÿ
During installation, the power supply must not be
Ÿ
excessively or dangerously bent or flattened.
Do not tamper with controls.
Ÿ
The appliance is to be connected to the water
Ÿ
mains using new hose sets and that old hose-sets
should not be reused.
The maximum number of place settings to be
Ÿ
washed is 15.
The maximum permissible inlet water pressure is
Ÿ
1Mpa.
The minimum permissible inlet water pressure is
Ÿ
0.04Mpa.
Before Calling for Service, review the following troubleshooting tips.
Problem Possible Causes Solution
Dish wa sher
does n’t start
Wat er not pu mped
Technical problems
from d ishwasher
Suds i n the tub
Stai ned tub int erior
Whit e film on
insi de surface
General problems
Ther e are rus t
stai ns on cutle ry
Knocki ng noise
in the was h cabinet
Ratt ling nois e
in the was h cabinet
Fuse b lown, or th e
circui t breaker act ed
Powe r supply is n ot
turned on
Error co de:E1;
Water pressu re is lo w
Door o f dishwas her
not prop erly clos ed.
Kink i n drain h os e
Filt er clogge d
Kitc hen sink cl ogged
Improp er deterg ent
Spil led rinse -aid
Dete rgent wit h
colo urant was u sed
Hard wat er minera ls
The affe cted item s are
not co rrosion resis tant.
A sp ra y arm is
knoc king agai nst
an i te m in a bask et
Item s of crockery
are loos e in the
wash c abinet
Repl ace fuse or res et circuit brea ker. Remo ve any ot he r
appl iances sh aring the s ame circuit w ith the dis hwasher
Make s ure the dishw asher is tu rne d on a nd the do or is
clos ed securely.
Make s ure the power c ord is properly p lugged in to the
wall s ocket.
Chec k that the wa ter sup pl y is conn ec ted properl y and
the wa ter is tu rned on .
Make s ure to close th e door proper ly and latc h it.
Chec k drain hos e.
Chec k coarse th e filter
(see s ection ti tled " Cl ea ning Th e Fi lter ")
Chec k the kitch en sink t o ma ke sure it is d raining w el l.
If t he p ro blem is the k itchen si nk not dr ai ning ,y ou m ay
need a p lumber ra ther th an a s ervic em an for di sh washe rs .
Use on ly the sp ec ial dis hw asher d et ergent to a void
suds . If this o cc urs, op en t he dish wa sher an d let suds
evap orate. Ad d 3.75 litres o f cold wate r to the tu b. C lose
and la tch the d is hwasher, then se lect any cy cle.
Dish washer wi ll drain ou t the wat er a t the fir st s tep. Op en
the do or after th e drain in g has sto pp ed and ch eck suds
have d isappea re d. Repeat i f necessa ry.
Alwa ys wipe up ri nse-aid s pills i mm ediatel y.
Make s ure that the de tergent i s the one w it hout
colo urant.
To cle an the inte rior, use a d amp spo nge with
dish washer de tergent a nd wear rub ber glove s.
Neve r use any o th er clea ne r than di sh washer
dete rgent for t he risk o f fo aming o r suds.
The it ems shoul d be corrosio n re sistant
Inte rrupt the p ro gram, and rea rrange th e items
whic h are obstruc ting the sp ray arm.
Inte rrupt the p ro gram,
and rear range the i tems of crock ery.
Noise
Knocki ng noise
in the wat er pipes
This m ay be cau se d
by o n- site inst allatio n
or t he c ro ss-sect ion
of t he p iping.
This h as no inf lu ence on t he d ishwa sh er func ti on.
if i n do ubt, co nt act a sui ta bly qua li fied pl um ber.
Page 27Page 6
Page 7
Installation Safety PrecautionsCare and Cleaning
Caring for the Dishwasher
The control panel can be cleaned by using a lightly
dampened cloth. After cleaning, make sure to dry it
thoroughly.
For the exterior, use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh
cleaners on any part of the dishwasher.
Cleaning the Door
To clean the edge around the door, you should use
only a soft warm, damp cloth.
To avoid penetration of water into the door lock and
electrical components, do not use a spray cleaner of
any kind.
WARNING!
Never use a spray cleaner to clean the door panel
Ÿ
as it may damage the door lock and electrical
components.
Abrasive agents or some paper towels should not
Ÿ
be used because of the risk of scratching or leaving
spots on the stainless steel surface.
Protect against Freezing
Please take frost protection measures on the
dishwasher in winter. After washing cycles, please
operate as follows:
1. Turn off the electrical power to the dishwasher.
2. Turn off the water supply and disconnect the water
inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve.
(Use a pan to catch the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a
sponge to soak up water in the sump.
NOTE: If your dishwasher cannot work because of
the ice, please contact an authorised service person.
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly for
hard water chemicals will clog the spray arm jets and
bearings.
To remove the upper spray arm, hold the nut and
rotate the arm clockwise to remove it.
To remove the lower spray arm, pull out the spray arm
upward.
Wash the arms in soapy and warm water and use a
soft brush to clean the jets. Replace them after rinsing
them thoroughly.
How to keep your Dishwasher in shape
After every wash, turn off the water supply to the
Ÿ
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
Before cleaning or performing maintenance,
Ÿ
always remove the electrical plug from the socket.
To clean the exterior and rubber parts of the
Ÿ
dishwasher, do not use solvents or abrasive
cleaning products. Only use a cloth with warm
soapy water.
To remove spots or stains from the surface of the
Ÿ
interior, use a cloth dampened with water an a little
vinegar, or a cleaning product made specifically for
dishwashers.
When not in Use for a long time
It is recommend that you run a wash cycle with the
dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the door
seals to last longer and prevent odours from forming
within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
Seals
One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent
this from occurring.
Open
Electrical Connection
This appliance should be properly grounded for
Ÿ
your safety. The power cord of this appliance is
equipped with a three-prong plug which mates
with standard three prong wall outlets to minimise
the possibility of electrical shock.
DO NOT UNDER ANY CIRCUMSTANCES CUT
Ÿ
OR REMOVE THE EARTHING CONNECTION
FROM THE POWER CORD SUPPLIED. FOR
PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
Please look at the rating label to know the rating
Ÿ
voltage and connect the dishwasher to the
appropriate power supply. Use the required fuse
10 amp, time delay fuse or circuit breaker
recommended and provide separate circuit
serving only this appliance.
Ensure the voltage and frequency of the power
Ÿ
being used corresponds to those on the rating
plate. Only insert the plug into an electrical socket
which is earthed properly. If the electrical socket to
which the appliance must be connected is not
appropriate for the plug , replace the socket, rather
than using a adaptors or the like as they could
cause overheating and burns.
The cord should be secured behind the appliance
Ÿ
and not left exposed or dangling to prevent
accidental injury.
The appliance should always be plugged into its
Ÿ
own individual electrical outlet which has a voltage
rating that matches the rating label on the
appliance. This provides the best performance and
also prevent overloading house wiring circuits that
could cause a fire hazard from overheated. Never
unplug the appliance by pulling the power cord.
Always grip the plug firmly and pull straight out
from the receptacle. Repair or replace immediately
all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length or at
either end. When moving the appliance, be careful
not to damage the power cord.
Extension Cord
WARNING: DO NOT USE AN EXTENSION CORD
Ÿ
OR AN ADAPTER PLUG WITH THIS APPLIANCE.
Grounding Instructions
This appliance must be earthed. In the event of a
Ÿ
malfunction or breakdown, earthing will reduce the
risk of electric shock by providing a path of least
resistance for the electric current. This appliance
is equipped with a cord having an equipmentearthing conductor and an earthing plug. The plug
must be plugged into an appropriate outlet that is
installed and earthed in accordance with all local
standards and requirements.
WARNING
Improper connection of the equipment earthing
Ÿ
conductor can result in the risk of an electric shock.
Check with a qualified electrician or service
Ÿ
representative if you are in doubt whether the
appliance is properly earthed.
Do not modify the plug provided with the
Ÿ
appliance. If the plug does not fit properly to the
outlet, please have a qualified electrician install a
proper outlet.
Page 7Page 26
Page 8
90° 90°
820mm
580mm
80
100
600mm
Electrical, drain
and water supply
line entrances
Space between cabinet
bottom and floor
Installation
Care and Cleaning
ATTENTION: The installation of the pipes and
Ÿ
electrical equipment should be done by an
authorised person.
WARNING: Electrical Shock Hazard - Disconnect
Ÿ
electrical power before installing dishwasher.
Failure to do so can result in death or electrical
shock.
Cabinet Preparation
The installation position of dishwasher should be
Ÿ
near the existing inlet and drain hoses and power
cord. Preparations should be made before
moving the dishwasher to the installation place.
One side of the cabinet sink should be chosen to
Ÿ
facilitate the connection of drain hoses of the
dishwasher.
Cabinet dimensions should be less than 5mm
Ÿ
between the top of dishwasher and cabinet and the
outer door aligned to cabinet.
Note: please check the accompanying installation
accessories (hook for aesthetic panel & screws).
Aesthetic Fascia Panel Dimensions and
installation
The aesthetic fascia panel should be processed
Ÿ
according to the diagram below.
589
566 ±0.2
451 ±0.22
540 ±0.22
62
75± 0.2
127
474 .8
517
710 ( MAX)
38
30
8-Ø 2
436
A
2-Ø 2
A A
4-Ø 2
Filtering System
The filter prevents larger remnants of food or other
objects from getting inside the pump.
The residue may block the filter, in this case they must
be removed.
The filter system consists of a coarse filter, a flat (Main
filter) and a microfilter (Fine filter).
MAIN FILTER: Food and soil particles trapped
1
in this filter are pulverized by a special jet on the
lower spray arm and washed down the drain.
COARSE FILTER: Larger items, such as
2
pieces of bones or glass, that could clog the
drain are trapped in the coarse filter. To
remove an item caught in this filter, gently
squeeze the taps on the top of this filter and
lift it out.
FINE FILTER: This filter holds soil and food
3
residues in the sump area and prevents it from
being redeposit on the dishes during a cycle.
2
STEP 1: Turn the filter in anti-clockwise direction.
1
Open
STEP 2: Lift the filter assembly up.
2
If the dishwasher is installed in the corner of a
Ÿ
cabinet, there should be clearance when the door is
opened as shown below.
Minimum space between the door and adjacent
Ÿ
cabinet when the door is opened is 50mm.
Dishwasher
Cabinet
Dishwasher
Door
Min. space
of 50mm
Front View
2-Ø 11
2-Ø 5.5
5
20 (M AX)
A-A
Section A-A
(Side View)
A
NOTES:
When following this procedure from step 1 to step
Ÿ
2, the filter system will be removed; when following
1
it from Step 2 to Step 1, the filter system will be
installed.
Inspect the filters for blocking after every time the
Ÿ
3
dishwasher has been used.
By unscrewing the coarse filter, you can remove the
Ÿ
filter system. Remove any food remnants and clean
the filters under running water.
The entire filter assembly should be cleaned once a
Filter Assembly
The filter efficiently removes food particles from the
wash water, allowing it to be recycled during the cycle.
For best performance and results, the filter must be
cleaned regularly. For this reason, it is a good idea to
remove the larger food particles trapped in the filter
after each wash cycle by rinsing the semicircular filter
and cup under running water.
Ÿ
week.
Cleaning the Filter
To clean the coarse filter and the fine filter, use a
cleaning brush. Reassemble the filter parts as shown
in the figures on the last page and reinsert the entire
assembly in the dishwasher, positioning it in its seat
and pressing downwards.
To remove the filter device, pull the cup handle in the
upward direction.
WARNING!
The dishwasher must never be used without the
Ÿ
filters.
Improper replacement of the filter may reduce the
Ÿ
WARNING!
When cleaning the filters, do not knock on them.
Ÿ
Otherwise, the filters could be contorted and the
performance of the dishwasher could be
decreased.
performance level of the appliance and damage
dishes and utensils.
Page 25Page 8
Page 9
Using Your Dishwasher
Installation
TURNING ON THE APPLIANCE
Starting a wash cycle:
1. Draw out the lower and upper basket, load the
dishes and push them back. It is recommended to
load the lower basket first, then the upper one (see
the section entitled “Loading the Dishwasher”).
2. Pour in the detergent (see Page 17).
3. Insert the plug into the socket. The power supply is
220-240 VAC /50 HZ, the specification of the
socket is 10A 250VAC. Make sure that the water
supply is turned on to full pressure.
4. Close the door, press the ON/OFF button to switch
on the machine.
5. Press the menu Button, then press ‘-’ or ‘+’ button
to change the program as follows:
Auto->Intensive->Heavy->Normal->Glass->60
Min->Rapid->Soak;
If a program is selected, the display screen will
show. Press the OK button, Close the door, the
dishwasher will start.
CHANGE THE PROGRAM
Premise:
1. A cycle that is underway can only be modified if it
has only been running for a short time. Otherwise,
the detergent may have already been released, and
the appliance may have already drained the wash
water.
If this is the case, the detergent dispenser must be
refilled (see the section entitled "Adding Detergent
to Dishwasher").
2. Open the door, press the Menu button, then press
‘+’ or ‘-’ button, you can change the program to the
desired cycle setting (see the section entitled
“Starting a washing program" ).
NOTE: If you open the door during a wash cycle ,
the machine will pause. The program light will
stop blinking and the buzzer will sound every
min u t e until you clos e t he door. Aft e r
you close the door, the machine will keep on
working after 10 seconds.
FORGET TO ADD A DISH?
A forgotten dish can be added at any time before the
detergent cup opens.
1. Open the door a little to stop the washing.
2. After the spray arms stop working, you can open
the door completely.
3. Load the forgotten dishes.
4. Close the door.
5. The dishwasher will start running again after 10
seconds.
WARNING! It is dangerous to open the door
when washing, because the hot water may scald
you.
AT THE END OF THE WASH CYCLE
When the working cycle has finished, the buzzer of the
dishwasher will sound for 8 seconds, then the
dishwasher will automatically go to off-mode after the
end of the programme. (If you opened the door during
the sound, you must press the on/off button to turn it
off). Then shut off the water supply and open the door
of the dishwasher. Wait for a few minutes before
unloading the dishwasher to avoid handling the dishes
and utensils while they are still hot and more
susceptible to breakage. They will also dry better.
Switch off the Dishwasher
1. The buzzer of the dishwasher will sound for 8
seconds, then automatically go to off-mode.
2. Turn off the water tap.
Open the door carefully
Hot dishes are sensitive to knocks. The dishes should
be allowed to cool down around 15 minutes before
removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a
few minutes before removing the dishes. Dishes will
be cooler and the drying will be improved.
Unloading the Dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one.
This will avoid water dripping from the upper Basket
onto the dishes in the lower one.
Install the hook on the aesthetic panel and put the
Ÿ
hook into the slot of the outer door of dishwasher
(see below).
After positioning the panel, fix it to the door using
Ÿ
the screws supplied. Remove the four short
screws and screw in the four long screws.
Remove the 4 short screws
Screw in the
4 long screws
Tension adjustment of the door
The door springs are set at the factory to the
Ÿ
proper tension for the outer door. If an aesthetic
fascia panel is installed, you will have to adjust the
door spring tension. Rotate the adjusting screw to
drive the adjustor to strain or relax the steel cable
(see below).
Adjust the door spring tension until the door
Ÿ
remains horizontal and balanced in the fullyopened position, yet rises to a close with the slight
lift of a finger.
Page 9Page 24
Page 10
Installation
Using Your Dishwasher
Cold Water Connection
How to Connect the safety supply hose
The appliance must be connected to the water mains
using new hose-sets. The old hose-sets should not be
reused.
Water pressure must be between 0.04 MPa and 1
MPa. If the pressure is below the minimum, consult
our Service Department for advice.
If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure
that the water is clear. This precaution is needed to
avoid the risk of the water inlet getting blocked and
damaging the appliance.
1. Pull the safety supply hose completely out from the
storage compartment located at the rear of
dishwasher.
2. Connect the cold water supply hose to a threaded
3/4(inch) connector and make sure that it is
fastened tightly in place.
3. Turn water fully on before starting the dishwasher.
AquaStop Anti-Flood Protection
Your dishwasher is fitted with an AquaStop anti-
Ÿ
flood protection system. This system consists of a
solenoid safety shut off valve which in the unlikely
event of a leak, a float switch will signal the Solenoid
to cut off the water supply. Therefore avoiding any
flooding.
Do not immerse the water inlet hose or the safety
Ÿ
valve in water. There is an electrical cable for the
safety valve in the double-walled water inlet hose.
If water inlet hose or the safety valve is damaged,
Ÿ
remove the main plug immediately.
Do not enlarge or shorten the inlet hose because it
Ÿ
contains electric parts.
CONTROL PANEL
1
Power button: To turn on/off the power supply.
1
Menu Button: Press the Me nu button, you
2
can select or set programs, de lay time,
option functions, alternative wash and
languages.
Menu Sequences:
Program select ion
Delay time setting
Option functions setting
Alter native was h function selection
Language setting
OK Button: Confirm the menu selection after
3
pressing the button
3
2
4 5
4
‘-’ Button: Move to t he left. Press the
button once the menu moves to the next
item on the left.
‘+’ Button: Move to t he left. Press the
5
button once the menu moves to the next
item on the right.
6
Display Screen: To displa y program time,
delay time, washing stages, error codes,
program names, L anguages , altern ative
wash, optional functions and using
information etc;
6
Quick operation guideline:
NOTES
1. When a selected program (and any other
functions) is finished, all of the settings will be
recorded by the system. The next time you wash,
you just need press the power and Ok buttons to
The safety supply hose consists of the double walls.
The hose's system guarantees its intervention by
blocking the flow of water in case of the supply hose
breaking and when the air space between the supply
hose itself and the outer corrugated hose is full of
water.
WARNING! In order to avoid water staying in the
inlet hose, please close the hydrant after using.
WARNING! A hose that attaches to a sink spray
can burst if it is installed on the same water line
as the dishwasher. If your sink has one, it is
recommended that the hose be disconnected
and the hole plugged.
How to disconnect the safety supply hose
1. Turn off the water.
2. Unscrew the safety supply hose from the faucet.
Page 10 Page 23
start the same washing settings as the last time.
The language setting will be recorded immediately
after you press the OK button.
2. If your machine rinse aid was previously used up,
the display screen will show add rinse aid
information when you press the power button.
This will remind you to refill the rinse aid. However
you can still keep using the machine following the
same operations as above by pressing the MENU
button to go ahead.
3. When the settings are done, the display screen will
show "please close the door". The machine will
start to work after the door is closed.
MENU DESCRIPTION
1. Program Selection:
The top line displays: Programmes
The bottom line displays: program names and
washing time.
Default program is: Normal.
Press + or - button to change the programs,
programs are: Auto, Intensive, Heavy, Normal,
Glass, 60min, Rapid and Soak.
2. Delay time setting: Can delay the washing time from
1-24 hours. Press + or - button to increase or
decrease the delay time.
3. Optional functions setting: Optional functions:
Extra Dry, Express and Power wash, default setting
is off, means no optional function is selected.
Extra drying: An increased temperature during the
final rinse to increase drying performance. There is
a slight increase in the energy consumption. (This
function can only be used with programs Intensive,
Heavy, Normal, Glass and 1 Hour).
Express: This function can reduce the washing
time. Water and energy consumption are slightly
increased. (This function can only be used with
programs Intensive, Heavy, Normal and Glass).
Power Wash: This function can wash very soiled
pots and pans. The temperature of water will be
increased during the washing cycle. (This function
can only be used with programs Intensive, Heavy,
Normal, Glass and 1 Hour).
3. Alternative wash function selection: Select both
sprayers running, upper sprayer running only or
lower sprayer running only.
4. Language setting: Languages that can be selected
are - Russian->Nederlands->English->Deutsch>Italiano->Francais.
Page 11
Using Your Dishwasher Installation
STARTING A WASHING PROGRAM
Wash Cycle Table
NOTE: Star ( ) means the need to fill rinse aid into the Rinse Aid Dispenser.
Program
Auto
Inte ns iv e
Heav y
Norm al
(*A S/NZS 2 007.1 )
Glass
60 Min
Rapi d
Cycle Selection
Information
Auto s en si ng wash, lightly,
norm al ly o r heavily soiled
crockery, wi th or with out
drie d- on f ood
For he av ie st soiled crockery,
and no rm al ly soiled pots,
pans , di sh es etc with dried
on soi li ng .
For he av il y soiled loads,
such a s po ts , plates,
glas se s an d lightly
soil ed p an s.
Stan da rd dai ly c yc le for
norm al ly s oiled loads,
such a s po ts , plates,
glas se s.
For li gh tl y soiled crockery
and gl as s.
For li ghtly soile d loads that
do not n eed excelle nt
dryi ng eff iciency.
A shor te r wa sh for lightly
soil ed l oa ds that do not
need d ry in g.
Description
of Cycle
Pre-wash (45 ° C)
Auto wa sh (5 0- 60 ° C)
Rins e
Rins e (6 0 °C )
Dryi ng
Pre-wash(50 °C )
Was h (65 °C)
Rins e
Rins e
Rins e (6 5° C)
Dryi ng
Pre-wash(4 5° C)
Was h (55 °C)
Rins e
Rins e (6 0 °C )
Dryi ng
Pre-wash
Was h (55 °C)
Rins e
Rins e( 45 °C )
Dryi ng
Pre-wash
Was h (40 °C)
Rins e
Rins e( 60 °C )
Dryi ng
Pre-wash (50°C)
Was h(60°C)
Rins e (5 0° C)
Dryi ng
Was h (40 )
Rins e
Rins e (4 5 °C )
°C
Detergent
pre/main
5/28.75g
(Or All )in1
5/28.75g
(Or All )in1
5/28.75g
(Or All )in1
5/28.75g
(Or All )in1
5/28.75g
5/28.75g
20g
time(min)
Running
120~170
155
170
175
115 0.85
60 90.8
40
Energy
(Kwh)
1.1~1.4
1.45
1.15
0.62
0.5
Water
(L)
10~13.5
17.0
13.5
12.0
13.5
10
Rinse
Aid
Drain Hose Connection
Insert the drain hose into a drain pipe with a
Ÿ
minimum diameter of 40mm, or let it run into the
sink, making sure to avoid bending or crimping it.
The top of the hose must be at a height less than
1000mm. The free end of the hose must not be
immersed in water to avoid back flow.
Syphon Connection
Insert the drain hose into a drain pipe with a
Ÿ
minimum diameter of 40mm, or let it run into the
sink, making sure to avoid bending or crimping it.
The top of the hose must be less than 1000mm.
How to Drain Excess Water from Hoses
If the sink is more than 1000mm higher than the
Ÿ
floor, the excess water in the hose cannot be
drained directly into the sink. It will be necessary to
drain excess water from the hose into a bowl or
suitable container that is held outside and lower
than the sink.
Water Outlet
Connect the water drain hose. The drain hose must
Ÿ
be correctly fitted to avoid water leaks. Ensure that
the water drain hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, make sure to
Ÿ
use a similar drain hose.
It must be no longer than 4 metres; otherwise the
Ÿ
cleaning effect of the dishwasher could be
reduced.
Electrical Connection
Connect the appliance power cord in accordance
Ÿ
with the precautions outlined on page 7.
Positioning the Appliance
Position the appliance in the desired location. The
Ÿ
back should rest against the wall behind it, and the
sides, along the adjacent cabinets or walls. The
dishwasher is equipped with water supply and
drain hoses that can be positioned either to the
right or the left sides to facilitate proper installation.
Affix the condensation strip under the work surface
Ÿ
of the cabinet. Ensure the condensation strip is
flush with edge of the work surface.
Condensation
Strip
Soak
To rinse d is he s that you plan
to was h la te r that day.
Pre-wash
8
NOTE:
* AS/NZS 2007.1: This program is the test cycle.
The information for comparability test in accordance with AS/NZS 2007.1, as follows:
Capacity: 15 setting
Ÿ
Position Upper basket: Upper wheels on rails
Ÿ
Rinse aid setting: 6
Ÿ
Open the door slightly 50mm to assist in drying of the dishes after every wash
Ÿ
0.01
3.8
Front
NOTE
The top of the hose
must be less than
1000mm.
Drain pipe
A
B
Counter
MAX 10 00mm
¦40m m
Page 11Page 22
Page 12
Using Your DishwasherInstallation
Levelling the Dishwasher
The dishwasher must be level for proper dish rack
Ÿ
operation and wash performance.
Once the appliance is positioned for levelling, the
Ÿ
height of the dishwasher may be altered via
adjustment of the screwing level of the feet. In any
case, the appliance should not be inclined more
than 2 °.
The rear feet can be adjusted from the front of the
Ÿ
dishwasher by turning the Allen screw in the middle
of the base of the dishwasher using an Allen key.
To adjust the front feet, use a flat screw driver and
Ÿ
turn the front feet until the dishwasher is level.
B
A
Securing the Dishwasher
The dishwasher must be secured in place using either
of the following methods:
Normal work surface - Put the right(left) installation
Ÿ
hook into the slot of the right(left) side plane and
secure it to the work surface with two woodscrews
(Pic 1).
Marble or granite work top - Bend the right(left)
Ÿ
installation hook into right-angle,and put it into the
slot of the right(left) side plane and secure it to the
work surface with two woodscrews (Pic 2).
Pic 1
Cutlery Basket
Cutlery should be placed in the cutlery rack
separately from each other in the appropriate
positions shown below. Make sure the utensils do
not nest together, this may cause bad performance.
For a top quality clean, place the silverware in the
basket making sure that:
They do not nest together.
Ÿ
Silverware is placed with the male face up.
Ÿ
Long utensils in the middle.
Ÿ
IN
5
3
1
2
5
Damage to glassware and other dishes
Possible Causes
Type of glass or manufacturing process. Chemical
Ÿ
composition of detergent.
Water temperature and duration of dishwasher
Ÿ
program.
Suggested remedy:
Use glassware or porcelain dishes that have been
Ÿ
marked dishwasher-proof by the manufacturer.
Use a mild detergent that is described as kind of
Ÿ
dishes If necessary, seek further information from
detergent manufacturers.
Select a program with as low a temperature.
Ÿ
To prevent damage, take glass and cutlery out of
5
2
Ÿ
the dishwasher as soon as possible after the
program has ended. as possible after the program
has ended.
1
4
5
Place a level on the door and rack track inside the
Ÿ
tub as shown to check that the dishwasher is level.
If necessary, level the dishwasher by adjusting the
Ÿ
three levelling legs individually.
When levelling the dishwasher, please pay
Ÿ
attention not to let the dishwasher tip over.
The maximum adjustment height of the feet is
Ÿ
50mm.
Check level Front to Back.
Spi rit lev el
Pic 2
Forks
1
Soup spoons2
3 Dessert spoons
Teaspoons4
5
Knives
Spi rit lev el
Check level side to side.
Page 12 Page 21
Page 13
Using Your Dishwasher
Using Your Dishwasher
Loading the Lower Basket
We suggest that you place large items and the most
difficult to clean items are to be placed into the
lower basket: such as pots, pans, lids, serving
dishes and bowls, as shown in the figure below.
It is preferable to place serving dishes and lids on
the side of the racks in order to avoid blocking the
rotation of the top spray arm.
e
d
IN
f
Folding spikes of Lower Basket
For better stacking of pots and pans, the spikes can
be folded down as show in the picture below.
QUICK START GUIDE
For detailed operating method read the corresponding content on the instruction manual.
Switch on the appliance
Fill the detergent dispenser
Check the rinse aid level
Load the baskets
Select a programme
Open the door, press the On/Off button to switch on the appliance.
Compartment A:
With each wash cycle.
Compartment B:
For programmes with pre-wash only.
(Follow the !)User Manual
Mechanical indicator C.
Electric indicator on control panel (if provided).
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Press the Menu Button, then press ‘+’ or ‘-’ button to select a programme. To accept press the OK button.
(See the section entitled - ‘Starting a Washing Program’)
C
B
A
f
b
b
d
f
Running the dishwasher
Changing the programme
T urn on the water tap, close the door. The machine will start working
after about 10 seconds.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Open the door and press the Menu button.
3. Press the ‘+’ or ‘-’ button to select a new programme.
4. Press the OK button, close the door to restart the dishwasher.
WARNING!
Saucers
e
Soup plates
Dinner plates
f
Dessert
dishes
Add forgotten dishes in the
dishwasher.
If the appliance is switched
off during a wash cycle.
Switch off the appliance
1.Open the door a little to stop the dishwasher.
2.After the spray arms stop working, you can open the door completely.
3.Add the forgotten dishes.
4.Close the door, the dishwasher will start running again after 10 seconds.
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state.
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, and the dishwasher will revert automatically to
off-mode after the end of the programme.
Open the door carefully
Hot steam may escape
when the door is opened!
Turn off the water tap,
unload the baskets
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better. Unload the appliance, starting from the lower basket.
Page 13Page 20
Page 14
Using Your Dishwasher
Using Your Dishwasher
BEFORE STARTING THE DISHWASHER
The following things should be checked before
starting the dishwasher:
1. That the dishwasher is level and fixed properly.
2. That the inlet valve is open .
3. There is no leakage at the connections of the
conducts.
4. The wires are tightly connected.
5. The power is switched on.
6. The inlet and drain hoses are not knotted or kinked.
7. All packing & print materials should be taken out of
the dishwasher.
PRIOR TO USING FOR THE FIRST TIME
Before using your dishwasher for the first time:
Fill the Rinse Aid Dispenser
The rinse aid is released during the final rinse to
prevent water from forming droplets on your dishes,
which can leave spots and streaks. It also improves
drying by allowing water to roll off the dishes. Your
dishwasher is designed to use liquid rinse aids. The
rinse aid dispenser is located inside the door next to
the detergent dispenser. To fill the dispenser, open the
cap and pour the rinse aid into the dispenser until the
level indicator turns completely black. The volume of
the rinse aid container is about 110ml.
Function of the Rinse Aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, and spot and streak free
drying.
WARNING!
Only use branded rinse aid for dishwashers. Never fill
the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent).
This would damage the appliance.
When to refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control
panel, you can judge the amount of rinse-aid by the
colour of the optical level indicator "C" located next
to the cap. When the rinse-aid container is full, the
whole indicator will be dark. As the rinse-aid
diminishes, the size of the dark dot decreases. You
should never let the rinse aid get below 1/4 full.
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated
below.
Full
3/4 Full
1/2 Full
1/4 Full (Should refill to eliminate spotting)
Empty
C (Rinse-Aid indicator)
Loading the Upper Basket
The upper basket is designed to hold more delicate
and lighter dishware such as glasses, coffee and tea
cup and saucers, as well as plates, small bowls and
shallow pans (as long as they are not too dirty).
Position the dishes and cookware so that they do not
get moved by the spray of water.
IN
a
a
c
c
a
a
b
a
a
c
a
a
b
a
a
c
c
c
Cups
a
b
Saucers
Please be reminded that:
Pots, serving bowls, etc, must always be placed
Ÿ
top down.
Deep pots should be slanted to allow water to
Ÿ
flow out.
Ÿ
The Bottom Basket features folding spikes so
that larger or more pots and pans can be loaded.
c
c
c
c
c
c
c
c
Glasses
a
c
c
a
Adjusting the Upper Basket
The height of the upper basket can be adjusted in
order to create more space for large utensils both
for the upper/lower basket. The height of the upper
basket can be adjusted by lifting the handle on
either side of the basket, see pictures below:
Lower position
Upper position
a
a
a
Adjustment Handle
Folding back the cup shelves
For reduced loads, the additional cup shelves can
be folded down if not required as shown below.
Page 19Page 14
Page 15
Using Your Dishwasher
Using Your Dishwasher
LOADING THE DISHWASHER BASKET
Recommendation
Consider buying utensils which are identified as
Ÿ
dishwasher-proof.
Use a mild detergent that is described as 'kind to
Ÿ
dishes'. If necessary, seek further information
from the detergent manufacturers.
For particular items, select a program with as low
Ÿ
a temperature as possible.
To prevent damage, do not take glass and cutlery
Ÿ
out of the dishwasher immediately after the
programme has ended.
Suitability of use in the dishwasher
NOT SUITABLE FOR USE:
Cutlery with wooden, horn china or mother-of-
Ÿ
pearl handles.
Plastic items that are not heat resistant.
Ÿ
Older cutlery with glued parts that are not
Ÿ
temperature resistant.
Bonded cutlery items or dishes.
Ÿ
Pewter or cooper items.
Ÿ
Crystal glass.
Ÿ
Steel items subject to rusting.
Ÿ
Wooden platters.
Ÿ
Items made from synthetic fibres.
Ÿ
LIMITED SUITABILITY:
Some types of glasses can become dull after a
Ÿ
large number of washes.
Silver and aluminum parts have a tendency to
Ÿ
discolour during washing.
Glazed patterns may fade if machine washed
Ÿ
frequently.
Place objects in the dishwasher in following way:
1. Items such as cups, glasses, pots/pans, etc. are
faced downwards.
2. Curved items, or ones with recesses, should be
loaded aslant so that water can run off.
3. All utensils are stacked securely and can not tip
over.
4. All utensils are placed in the way that the spray
arms can rotate freely during washing.
NOTE: Very small items should not be washed in the
dishwasher as they could easily fall out of the baskets.
Load hollow items such as cups, glasses, pans
Ÿ
etc. With the opening facing downwards so that
water cannot collect in the container or a deep
base.
Dishes and items of cutlery must not lie inside
Ÿ
one another, or cover each other.
To avoid damage to glasses, they must not
Ÿ
touch.
Load large items which are most difficult to clean
Ÿ
into the lower basket.
The upper basket is designed to hold more
Ÿ
delicate and lighter dishware such as glasses,
coffee and tea cups.
Long bladed knives stored in an upright position
Ÿ
are a potential hazard!
Long and/or sharp items of cutlery such as
Ÿ
carving knives must be positioned horizontally in
the upper basket.
Please do not overload your dishwasher. This is
Ÿ
important for good results and for reasonable
consumption of energy.
How to fill the Rinse Aid Dispenser
1. To open the dispenser, turn the cap to the "open"
(left) arrow and lift it out.
2. Pour the rinse aid into the dispenser, being careful
not to overfill.
3. Replace the cap by inserting it aligned with
"open" arrow and turning it to the closed (right)
arrow.
1
2
3
Be careful not to overfill the dispenser, because this
could cause over sudsing. Wipe away any spills with a
damp cloth. Don't forget to replace the cap before
you close dishwasher door.
ATTENTION! Clean up any rinse aid spilt during filling
with an absorbent cloth to avoid excess foaming
during the next wash.
Attention before or after Loading the Dishwasher
Baskets.
For best performance of the dishwasher, follow these
loading guidelines. Features and appearance of
baskets and cutlery baskets may vary from your
model.
Scrape off any large food particles. Soften remnants of
burnt food in pans.
It is not necessary to rinse the dishes under running
water.
Removing the Dishes
To prevent water dripping from the upper basket into
the lower basket, we recommend that you empty the
lower basket first and then the upper basket.
Page 15Page 18
Page 16
Using Your Dishwasher
Using Your Dishwasher
Adjusting the Rinse Aid Dispenser
The rinse aid dispenser has six or four settings. Always
start with the dispenser set on "4". If spots and poor
drying are a problem, increase the amount of rinse aid
dispensed by removing the dispenser lid and rotating
the dial to "5". If the dishes are still not drying properly
or show spots, adjust the dial to the next higher level
until your dishes are spot free. The recommended
setting is "4". (Factory value is "4".)
NOTE: Increase the dose if there are drops of water or
lime spots on the dishes after washing. Reduce it if
there are sticky whitish stains on your dishes or a
bluish film on glassware or knife blades.
Adjust lever (Rinse)
M
A
X
Concentrated Detergent
Based on their chemical composition, detergents can
be split in two basic types:
Conventional, alkaline detergents with caustic
Ÿ
components
Low alkaline concentrated detergents with natural
Ÿ
enzymes
The use of “normal” washing programs in combination
with concentrated detergents reduces pollution and is
good for your dishes;
These wash programs are specifically matched to the
dirt-dissolving properties of the enzymes of the
concentrated detergent. For this reason “normal”
wash programs in which concentrated detergents are
used can achieve the same results that can otherwise
only be achieved using “intensive” programs.
Detergent Tablets
Detergent tablets of different brands dissolve at
different speeds. For this reason some detergent
tablets cannot dissolve and develop their full cleaning
power during short programs. Therefore please use
long programs when using detergent tablets, to
ensure the complete removal of detergent residuals.
Detergent Dispenser
The dispenser must be refilled before the start of each
wash cycle following the instructions provided in the
wash cycle table. Your dishwasher uses less
detergent and rinse aid than Conventio nal
dishwasher. Generally, only one tablespoon of
detergent is needed for a normal wash load. More
heavily soiled items need more detergent. Always add
the detergent just before starting the dishwasher,
otherwise it could get damp and will not dissolve
properly.
Adding detergent to Dishwasher
If the lid is closed: press release button. The lid will
Ÿ
spring open.
Always add the detergent just before starting each
Ÿ
wash cycle.
Only use branded detergent aid for dishwasher.
Ÿ
1
Push l at ch t o op en
WARNING! Dishwasher detergent is poisonous!
Take care to keep it out of reach of children.
Proper Use of Detergent
Only use detergent specifically made for the use in
Ÿ
dishwashers. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser
Ÿ
until you're ready to wash dishes.
Fill the detergent dispenser with detergent. The
marking indicates the dosing levels, as shown below:
Location of main wash cycle detergent.
A
Location of pre-wash cycle detergent.
B
A B
Detergents
Detergents have chemical ingredients that are
necessary to remove dirt, crush dirt and transport it
out of the dishwasher. Most of the commercial
quality detergents are suitable for this purpose.
There are 3 sorts of detergents:
1. With phosphate and with chlorine
2. With phosphate and without chlorine
3. Without phosphate and without chlorine
Normally new pulverised detergent is without
phosphate. Thus the water softener function of
phosphate is not given. In this case we recommend to
fill salt in the salt container even when the hardness of
water is only 6 °dH. If detergents without phosphate
are used in the case of hard water often white spots
appear on dishes and glasses. In this case please add
more detergent to reach better results. Detergents
without chlorine do only bleach a little. Strong and
coloured spots will not be removed completely. In this
case please choose a program with a higher
temperature.
Please observe the manufacturers dosing and
storage recommendations as stated on the detergent
packaging.
Close the lid and press until it locks in place.
2
If the dishes are heavily soiled, place an additional
detergent dose in the pre-wash detergent chamber.
This detergent will take effect during the pre-wash
phase.
NOTE: See information about the amount of
detergent for the single programs on page 22. Please
be aware, that according to the level soiling and the
specific hardness of water differences are possible.
P l e a s e o b s e r v e t h e m a n u f a c t u r e r ' s
recommendations on the detergent packaging.
Page 17Page 16
Loading...