Voltage connected Load:see rating label
Water pressure:0.04-1.0MPa
Power supply:see rating label
Capacity:15 place settings
Page 3Page 26
De’Longhi’s Safety PrecautionsTroubleshooting
De’Longhi pride themselves on their innovative range
of the highest quality consumer products.
De’Longhi ensures all of its products are 100% safe
through quality design and manufacture. All products
meet or exceed stringent laboratory-tested safety
requirements.
It is necessary for anyone using an electrical appliance
to be safety conscious. The following precautions are
essential for the safe use of an electrical appliance.
Carefully read all of the instructions provided with your
appliance:
Always turn the power off at the power outlet before
Ÿ
you insert or remove a plug. Remove by grasping
the plug, do not pull on the cord.
Do not use your appliance with an extension cord
Ÿ
unless this cord has been checked and tested by a
qualified technician or service person. The
extension cord must be a VDE-Listed, 3-wire
grounding extension cord that has a grounding
plug and outlet and that the electrical rating of the
cord is 220-240 volts and at least 10 amperes.
Always use your appliance from a power outlet of
Ÿ
the voltage (A.C. only) marked on the appliance.
Do not use an appliance for any purpose other than
Ÿ
its intended use.
Do not attempt to repair an electrical appliance.
Ÿ
Return a damaged or malfunctioning appliance to a
qualified service centre for adjustment or repair if
required.
The appliance must be positioned so the AC plug is
Ÿ
accessible.
This appliance is designed exclusively for
Ÿ
household use. All other uses are strictly forbidden.
The appliance is not intended for use by persons
Ÿ
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
If the power cable is damaged, it must be replaced
Ÿ
by the manufacturer, an authorised service centre
or a qualified electrician in order to eliminate all risk.
This appliance is intended to be used in household
Ÿ
and similar applications such as:
- staff kitchen areas in shops, offices and other
working environments;
- farm houses;
- by clients in hotels, motels and other residential
type environments;
- bed and breakfast type environments.
Dishwasher Safety Precautions
Your safety and the safety of others is very important.
Safety messages are displayed in this manual and on
your appliance.
Read and obey these safety messages as they will alert
you to potential hazards and tell you how to reduce the
chance of injury.
DANGER
WARNING
CAUTION
Safety Alert Symbol
This symbol alerts you to potential hazards.
Danger
Danger indicates a high level of risk to yourself and others.
Ensure that care is taken to avoid severe injury or even
death.
Warning
Warning indicates a moderate level of risk to yourself, others
and the product. Ensure that care is taken to avoid extensive
product damage or serious injury.
Caution
Caution indicates a level of risk to yourself, others and the
product. Ensure care is taken to avoid moderate product
damage or injuries.
Page 5Page 24
Dishwasher Safety Precautions
Before the appliance is used, it must
be properly positioned and installed
as described in this manual, so read
the manual carefully. To reduce the
risk of fire, electrical shock or injury
when using the appliance, follow
basic precaution, including the
following:
DANGER
Grounding Instructions
This appliance must be grounded. In the event of a
Ÿ
malfunction or breakdown, grounding will reduce
the risk of an electric shock by providing a path of
least resistance of electric current. This appliance is
equipped with a cord having an equipmentgrounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all
local codes and ordinances.
Improper connection of the equipment-grounding
Ÿ
conductor can result in the risk of an electric shock.
Check with a qualified electrician or service
Ÿ
representative if you are in doubt whether the
appliance is properly grounded. Do not modify the
plug provided with the appliance; If it does not fit
the outlet. Have a proper outlet installed by a
qualified electrician.
WARNING
Do not abuse, sit on, or stand on the door or dish
Ÿ
rack of the dishwasher.
Do not touch the heating element during or
Ÿ
immediately after use. (This instruction is only
applicable to machines with a visual heating
element.)
Do not operate your dishwasher unless all
Ÿ
enclosure panels are properly in place. Open the
door very carefully if the dishwasher is operating,
there is a risk of water squirting out.
Do not place any heavy objects on or stand on the
Ÿ
door when it is open. The appliance could tip
forward.
When loading items to be washed:
Ÿ
1. Locate sharp items so that they are not likely to
damage the door seal;
2. Warning: Knives and other utensils with sharp
points must be loaded in the basket with their
points down or placed in a horizontal position.
Check that the detergent compartment is empty
Ÿ
after completion of the wash cycle.
WARNING
When using your dishwasher, you should prevent
Ÿ
plastic items from coming into contact with the
heating element (This instruction is only applicable
to machines with a visual heating element).
Do not wash plastic items unless they are marked
Ÿ
dishwasher safe or the equivalent. For plastic items
not so marked, check the manufacturer's
recommendations.
Use only detergent and rinse additives designed for
Ÿ
an automatic dishwasher.
Never use soap, laundry detergent, or hand
Ÿ
washing detergent in your dishwasher. Keep these
products out of the reach of children.
Keep children away from detergent and rinse aid,
Ÿ
keep children away from the open door of the
dishwasher, there could still be some detergent left
inside.
This appliance is not intended for use by persons
Ÿ
(including children )with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
Ÿ
do not play with the appliance.
Dishwasher detergents are strongly alkaline, they
Ÿ
can be extremely dangerous if swallowed. Avoid
contact with skin and eyes and keep children away
from the dishwasher when the door is open.
The door should not be left open, since this could
Ÿ
increase the risk of tripping.
If the supply cord is damaged, it must be replaced
Ÿ
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Remove the door to the washing compartment
Ÿ
when removing an old dishwasher from service or
discarding it.
Please dispose of packing materials properly.
Ÿ
Use the dishwasher only for its intended function.
Ÿ
During installation, the power supply must not be
Ÿ
excessively or dangerously bent or flattened.
Do not tamper with controls.
Ÿ
The appliance is to be connected to the water
Ÿ
mains using new hose sets and that old hose-sets
should not be reused.
The maximum number of place settings to be
Ÿ
washed is 15.
The maximum permissible inlet water pressure is
Ÿ
1Mpa.
The minimum permissible inlet water pressure is
Ÿ
0.04Mpa.
Installation Safety PrecautionsCare and Cleaning
Electrical Connection
This appliance should be properly grounded for
Ÿ
your safety. The power cord of this appliance is
equipped with a three-prong plug which mates
with standard three prong wall outlets to minimise
the possibility of electrical shock.
DO NOT UNDER ANY CIRCUMSTANCES CUT
Ÿ
OR REMOVE THE EARTHING CONNECTION
FROM THE POWER CORD SUPPLIED. FOR
PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
Please look at the rating label to know the rating
Ÿ
voltage and connect the dishwasher to the
appropriate power supply. Use the required fuse
10 amp, time delay fuse or circuit breaker
recommended and provide separate circuit
serving only this appliance.
Ensure the voltage and frequency of the power
Ÿ
being used corresponds to those on the rating
plate. Only insert the plug into an electrical socket
which is earthed properly. If the electrical socket to
which the appliance must be connected is not
appropriate for the plug , replace the socket, rather
than using a adaptors or the like as they could
cause overheating and burns.
The cord should be secured behind the appliance
Ÿ
and not left exposed or dangling to prevent
accidental injury.
The appliance should always be plugged into its
Ÿ
own individual electrical outlet which has a voltage
rating that matches the rating label on the
appliance. This provides the best performance and
also prevent overloading house wiring circuits that
could cause a fire hazard from overheated. Never
unplug the appliance by pulling the power cord.
Always grip the plug firmly and pull straight out
from the receptacle. Repair or replace immediately
all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length or at
either end. When moving the appliance, be careful
not to damage the power cord.
Extension Cord
WARNING: DO NOT USE AN EXTENSION CORD
Ÿ
OR AN ADAPTER PLUG WITH THIS APPLIANCE.
Grounding Instructions
This appliance must be earthed. In the event of a
Ÿ
malfunction or breakdown, earthing will reduce the
risk of electric shock by providing a path of least
resistance for the electric current. This appliance
is equipped with a cord having an equipmentearthing conductor and an earthing plug. The plug
must be plugged into an appropriate outlet that is
installed and earthed in accordance with all local
standards and requirements.
WARNING
Improper connection of the equipment earthing
Ÿ
conductor can result in the risk of an electric shock.
Check with a qualified electrician or service
Ÿ
representative if you are in doubt whether the
appliance is properly earthed.
Do not modify the plug provided with the
Ÿ
appliance. If the plug does not fit properly to the
outlet, please have a qualified electrician install a
proper outlet.
Page 7Page 22
InstallationUsing Your Dishwasher
Positioning the Appliance
Position the appliance in the desired location. The
Ÿ
back should rest against the wall behind it, and the
sides, along the adjacent cabinets or walls. The
dishwasher is equipped with water supply and
drain hoses that can be positioned either to the
right or the left sides to facilitate proper installation.
WARNING! Where the dishwasher has ventilation
openings in the base, these openings must not be
obstructed by a carpet.
Levelling
Once the appliance is positioned for levelling, the
Ÿ
height of the dishwasher may be altered via
adjustment of the screwing level of the feet. In any
case, the appliance should not be inclined more
than 2 °.
About the Safety Supply Hose
The safety supply hose consists of double walls. The
hose's system guarantees its intervention by blocking
the flow of water in case of the supply hose breaking
and when the air space between the supply hose itself
and the outer corrugated hose is full of water.
WARNING! In order to avoid water staying in the inlet
hose, please close the hydrant after using.
WARNING! A hose that attaches to a sink spray
can burst if it is installed on the same water line
as the dishwasher. If your sink has one, it is
recommended that the hose be disconnected
and the hole plugged.
How to disconnect the safety supply hose
1. Turn off the water.
2. Release the water pressure by depressing the
pressure release button. This relieves water
pressure and protects you, and the room, from
severe splashing.
3. Unscrew the safety supply hose from the faucet.
Cold Water Connection
How to Connect the safety supply hose
The appliance must be connected to the water mains
using new hose-sets. The old hose-sets should not be
reused.
Water pressure must be between 0.04 MPa and
1 MPa. If the pressure is below the minimum, consult
our Service Department for advice.
If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure
that the water is clear. This precaution is needed to
avoid the risk of the water inlet getting blocked and
damaging the appliance.
1. Pull the safety supply hose completely out from the
storage compartment located at the rear of
dishwasher.
2. Connect the cold water supply hose to a threaded
3/4(inch) connector and make sure that it is
fastened tightly in place.
3. Turn water fully on before starting the dishwasher.
Drain Hose Connection
Insert the drain hose into a drain pipe with a
Ÿ
minimum diameter of 40mm, or let it run into the
sink, making sure to avoid bending or crimping it.
The top of the hose must be at a height less than
1000mm. The free end of the hose must not be
immersed in water to avoid back flow.
Syphon Connection
Insert the drain hose into a drain pipe with a
Ÿ
minimum diameter of 40mm, or let it run into the
sink, making sure to avoid bending or crimping it.
The top of the hose must be less than 1000mm.
How to Drain Excess Water from Hoses
If the sink is more than 100cm higher than the floor,
Ÿ
the excess water in the hose cannot be drained
directly into the sink. It will be necessary to drain
excess water from the hose into a bowl or suitable
container that is held outside and lower than the
sink.
Water Outlet
Connect the water drain hose. The drain hose must
Ÿ
be correctly fitted to avoid water leaks. Ensure that
the water drain hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, make sure to
Ÿ
use a similar drain hose.
It must be no longer than 4 metres; otherwise the
Ÿ
cleaning effect of the dishwasher could be
reduced.
Front
NOTE
The top of the hose
must be less than
1000mm.
Drain pipe
A
B
Counter
MAX 1000mm
¦40mm
Page 9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.