5
SHORT CORD INSTRUCTIONS
A short power cord is provided to reduce the risk resulting from entanglement or tripping over a longer cord. Longer detachable
power supply cords are available and may be used if care is exercised in their use. If a longer detachable power cord or extension
cord is used the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance,
and the longer cord should be arranged so that it will not drape over the countertop or table top where it can be pulled on by children or tripped over unintentionally.
If your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), this plug
will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not attempt to
modify the plug in any way.
Before using the Grill plate for the first time
Remove all labels and wash all parts with the exception of the detachable thermostat in hot soapy water, rinse thoroughly and dry.
INSTALLATION
- Before using, check that the appliance has not been damaged during transport.
- NOTE: the lid knob (Model BG24 Only) is packed in the foam or cardboard inserts of the packa-
ging. Be sure you have all parts pertaining to your model (noted in the “know your Grill” section
of the manual) before discarding any packaging materials.
- Lid Knob Assembly (BG24 Only) (fig. 2):
- remove screw from the center post in lid knob.
- while holding center post in place on lid knob, align tab on underside of lid knob with slot in
top of lid.
- from underside of lid, align hole in center post with hole in lid. Handtighten lid knob to lid with
screw. Do not overtighten screw; this could crack the lid.
- Position the drip tray in the grill base.
- Ensure the grill plate is correctly placed on the base.
- Do not use the appliance if it is not installed following the sequence as shown at page 4.
- Install the appliance on a dry flat surface, and out of the reach of children, as some parts of the appliance reach very high temperatures during operation.
- Always place the glass lid in position during use unless the recipe advises differently.
- Before inserting the plug in the outlet, check that:
- the power of the outlet corresponds to the value indicated on the rating plate applied to the accessory plug.
- the outlet has a minimum rating of 15 A.
- plug this appliance into a 120V AC electrical wall outlet only. DO NOT plug into any outlet which is currently supplying power
to any other equipment.
- the outlet is suitable for the plug, otherwise replace the outlet.
- the manufacturer declines all liability if this instruction is not respected.
Use only the detachable temperature controlling plug “De’ Longhi TKSP-S004-2393GW-F” supplied with this
appliance.
Never use any other type of temperature controller.
IMPORTANT:
- The temperature control is a sensitive device; use care not to drop, hit or impact the temperature control
against hard surfaces, as it could affect the temperature reading.
Do not use the temperature control if it overheats or is damaged in any other way.
- Be sure temperature dial is in the OFF position before inserting into or removing from control socket.
Failure to do so could cause product failure or overheating.
- Be sure to insert the temperature control fully into the control socket in the base.
If the temperature control is not inserted properly, it can cause product damage.