Dell Vostro 270s User Manual
Dell Vostro 270s
Owner’s Manual
Regulatory Model: D06S
Regulatory Type: D06S001
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2012 Dell Inc.
Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, Precision ON™,ExpressCharge™, Latitude™, Latitude ON™,
OptiPlex™, Vostro™, and Wi-Fi Catcher™ are trademarks of Dell Inc. Intel®, Pentium®, Xeon®, Core™, Atom™, Centrino®, and Celeron
are registered trademarks or trademarks of Intel Corporation in the U.S. and other countries. AMD® is a registered trademark and
AMD Opteron™, AMD Phenom™, AMD Sempron™, AMD Athlon™, ATI Radeon™, and ATI FirePro™ are trademarks of Advanced Micro
Devices, Inc. Microsoft®, Windows®, MS-DOS®, Windows Vista®, the Windows Vista start button, and Office Outlook® are either
trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Blu-ray Disc™ is a trademark
owned by the Blu-ray Disc Association (BDA) and licensed for use on discs and players. The Bluetooth® word mark is a registered
trademark and owned by the Bluetooth® SIG, Inc. and any use of such mark by Dell Inc. is under license. Wi-Fi® is a registered
trademark of Wireless Ethernet Compatibility Alliance, Inc.
2012 - 10
Rev. A00
®
Contents
Notes, Cautions, and Warnings...................................................................................................2
1 Working on Your Computer.......................................................................................................5
Before Working Inside Your Computer.....................................................................................................................5
Turning Off Your Computer.......................................................................................................................................6
After Working Inside Your Computer........................................................................................................................6
2 Removing and Installing Components.....................................................................................7
Recommended Tools................................................................................................................................................7
Removing the Cover..................................................................................................................................................7
Installing the Cover...................................................................................................................................................8
Removing the Front Bezel.........................................................................................................................................8
Installing the Front Bezel..........................................................................................................................................9
Removing the Fan Shroud.........................................................................................................................................9
Installing the Fan Shroud........................................................................................................................................10
Removing the Drive Cage.......................................................................................................................................10
Installing the Drive Cage.........................................................................................................................................12
Removing the Optical Drive....................................................................................................................................12
Installing the Optical drive......................................................................................................................................12
Removing the Hard Drive........................................................................................................................................13
Installing the Hard drive..........................................................................................................................................13
Removing the Expansion Card................................................................................................................................14
Installing the Expansion Card.................................................................................................................................14
Removing the Coin-Cell Battery..............................................................................................................................14
Installing the Coin-Cell Battery...............................................................................................................................15
Removing the Memory............................................................................................................................................15
Installing the Memory.............................................................................................................................................15
Removing the Power Switch...................................................................................................................................15
Installing the Power Switch....................................................................................................................................16
Removing the Heat-Sink Assembly.........................................................................................................................16
Installing the Heat-Sink Assembly..........................................................................................................................17
Removing the Input/Output (I/O) Panel...................................................................................................................17
Installing the I/O Panel............................................................................................................................................19
Removing the Processor.........................................................................................................................................19
Installing the Processor..........................................................................................................................................20
Removing the System Board...................................................................................................................................20
System Board Components....................................................................................................................................21
Installing the System Board....................................................................................................................................21
Removing the Power-Supply Unit...........................................................................................................................22
Installing the Power-Supply Unit............................................................................................................................22
3 System Setup.............................................................................................................................25
Boot Sequence.......................................................................................................................................................25
Navigation Keys......................................................................................................................................................25
System Setup Overview..........................................................................................................................................26
Enter System Setup................................................................................................................................................26
System Setup Screens............................................................................................................................................26
System Setup Options.............................................................................................................................................27
Exit....................................................................................................................................................................29
Updating the BIOS .................................................................................................................................................29
Clearing Forgotten Password.................................................................................................................................30
Clearing CMOS.......................................................................................................................................................31
System and Setup Password..................................................................................................................................32
Assigning a System Password and Setup Password......................................................................................32
Deleting or Changing an Existing System and/or Setup Password..................................................................33
Disabling a System Password..........................................................................................................................33
4 Diagnostics.................................................................................................................................35
Enhanced Pre-Boot System Assessment (ePSA) Diagnostics...............................................................................35
5 Technical Specification...........................................................................................................37
6 Contacting Dell..........................................................................................................................41
Working on Your Computer
Before Working Inside Your Computer
Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your
personal safety. Unless otherwise noted, each procedure included in this document assumes that the following
conditions exist:
• You have read the safety information that shipped with your computer.
• A component can be replaced or--if purchased separately--installed by performing the removal procedure in
reverse order.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For
additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/
regulatory_compliance
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface, such as a connector on the back of the computer.
1
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a
card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its
pins.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some
cables have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs
before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any
connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your computer and certain components may appear differently than shown in this document.
To avoid damaging your computer, perform the following steps before you begin working inside the computer.
1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer).
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the
cable from the network device.
3. Disconnect all network cables from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets.
5. Press and hold the power button while the computer is unplugged to ground the system board.
6. Remove the cover.
5
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal
surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal
surface to dissipate static electricity, which could harm internal components.
Turning Off Your Computer
CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your
computer.
1. Shut down the operating system:
– In Windows 7:
Click Start , then click Shut Down.
– In Windows Vista:
Click Start , then click the arrow in the lower-right corner of the Start menu as shown below, and then
click Shut Down.
– In Windows XP:
Click Start → Turn Off Computer → Turn Off . The computer turns off after the operating system shutdown
process is complete.
2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not
automatically turn off when you shut down your operating system, press and hold the power button for about 6
seconds to turn them off.
After Working Inside Your Computer
After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before
turning on your computer.
1. Replace the cover.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the
computer.
2. Connect any telephone or network cables to your computer.
3. Connect your computer and all attached devices to their electrical outlets.
4. Turn on your computer.
5. If required, verify that the computer works correctly by running the Dell Diagnostics.
6
Removing and Installing Components
This section provides detailed information on how to remove or install the components from your computer.
Recommended Tools
The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Phillips screwdriver
• Small plastic scribe
Removing the Cover
2
1. Follow the procedures in
2. Remove the screws that secure the cover to the computer to slide and lift the cover upwards to remove it from the
computer.
Before Working Inside Your Computer
.
7
Installing the Cover
1. Align the cover along its tabs on the chassis and slide the cover to its original position.
2. Tighten the screws to secure the cover to the computer.
3. Follow the procedures in
After Working Inside Your Computer
.
Removing the Front Bezel
1. Follow the procedures in
2. Remove the cover.
3. Pry the front panel retention clips away from the chassis located at the edge of front bezel.
Before Working Inside Your Computer
.
4. Rotate the front bezel away from the computer to release the hooks on the opposite edge of the bezel from the
chassis.
8
Installing the Front Bezel
1. Insert the hooks along the bottom edge of the front bezel into the slots on the chassis front.
2. Rotate the bezel toward the computer to engage the front-panel retention clips until they click into place.
3. Install the cover.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Fan Shroud
1. Follow the procedures in
2. Remove the cover.
3. Press in on the fan shroud to lift and release the tabs securing the fan shroud and remove it from the computer.
Before Working Inside Your Computer
.
9
Installing the Fan Shroud
1. Place the fan shroud over the processor fan and heat-sink assembly.
2. Press the fan shroud until the tabs on the fan shroud snap into place.
3. Install the cover.
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Drive Cage
1. Follow the procedures in
2. Remove:
a) cover
b) fan shroud
c) front bezel
3. Disconnect the power and data cables from the hard drive and the optical drive.
10
Before Working Inside Your Computer
.
4. Remove the screws that secure the drive cage and lift the drive cage to remove it from the computer.
11
Installing the Drive Cage
1. Tighten the screws to secure the drive cage to the computer.
2. Connect the data cable and power cable to the back of the hard drive and the optical drive.
3. Install:
a) front bezel
b) fan shroud
c) cover
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Optical Drive
1. Follow the procedures in
2. Remove:
a) cover
b) fan shroud
c) front bezel
d) drive cage
3. Remove the screws that secure the optical drive to the drive cage and slide the optical drive out of the drive cage.
Before Working Inside Your Computer
.
Installing the Optical drive
1. Slide the optical drive into the drive cage.
2. Align the screw holes on the optical drive with the screw holes on the drive cage.
3. Tighten the screws to secure the optical drive to the drive cage.
4. Install:
12
a) drive cage
b) front bezel
c) fan shroud
d) cover
5. Follow the procedures in
After Working Inside Your Computer
Removing the Hard Drive
.
1. Follow the procedures in
2. Remove:
a) cover
b) fan shroud
c) front bezel
d) drive cage
3. Remove the screws that secure the hard drive to the drive cage and slide the hard drive out of the drive cage.
Before Working Inside Your Computer
.
Installing the Hard drive
1. Slide the hard drive into the drive cage.
2. Align the screw holes on the hard drive with the screw holes on the drive cage.
3. Tighten the screws that secure the hard drive to the drive cage.
4. Install:
a) drive cage
b) front bezel
c) fan shroud
d) cover
13
Loading...