This Readme contains updated information for your "Dell Update
Packages for Linux Operating Systems User's Guide" and any other
technical documentation included with the Dell Update Packages
for Linux.
Dell Update Packages offer ease and flexibility for updating the
system software on Dell PowerEdge(TM) systems. Update Packages are
available for the following software components:
* System BIOS
* System firmware, also known as the Embedded Systems Management
(ESM) firmware
* Dell Embedded Open Manage Server Administrator for ESXi Server
version 4.0
* Dell Remote Access Controller (DRAC) firmware, which also includes
Embedded Remote Access (ERA) firmware
It is recommended that you apply this update during your next
scheduled update cycle. The update contains feature enhancements or
changes that will keep your system software current and compatible
with other system modules (firmware, BIOS, drivers, and software).
NOTE: For the latest information about the various systems and
operating systems that Dell Update Packages are supported on,
see the "Dell Systems Software Support Matrix". This guide is
available on the Dell Support website at
"www.support.dell.com/manuals".
Update Packages may also be applied in a pre-operating system
environment that uses the Embedded Linux (ELI) environment through
the Dell OpenManage(TM) Deployment Toolkit (DTK).
Update Packages currently do not support all system component types.
Dell will continue to make Update Packages available on additional
devices in future.
This release of Update Packages supports updates to the devices
listed in the following table.
---------------------------------------------------------------------RAID firmware PERC 4/Di, PERC 4e/Di, PERC 4e/DC,
PERC 4e/Si, PERC 4/DC, PERC 4/SC, PERC H200,
PERC H700,PERC H800 Adapter,
PERC S300 Adapter,
PERC 5/E, PERC 5/i, SAS 5/i,
SAS 5/iR Adapter, SAS 5/E, SAS 5/iR,
SAS 6/iR, SAS 6/iR Adapter, PERC 6/E,
PERC 6/i, PERC 6/i Adapter, CERC6/i
---------------------------------------------------------------------Removable disk drive PowerVault RD1000
backup firmware
######################################################################
KNOWN ISSUES
######################################################################
--------------------------------------------------------------------For all Dell Update Packages
---------------------------------------------------------------------* Do not run other applications while executing Dell Update Packages.
* For firmware Dell Update Packages, an update package will not
inventory the device if only a native non-Dell driver is installed.
Therefore, firmware update packages cannot upgrade a device with a
native driver.
* If the following error is displayed,
"Error while loading shared libraries: libstdc++.so.5:
cannot open shared object file: No such file or directory",
install the compatibility libraries from your Linux distribution.
To install the compatibility libraries, use the following command:
SLES 10 and SLES 11 (all service packs) uses
"libstdc++-33-32bit-3.3.3-11.9.x86_64.rpm"
* If Update Packages stop abruptly due to a power outage or
abnormal termination, perform the following steps:
1. Remove the lock file.
2. Type the following command to do so: "rm -f /var/lock/.spsetup"
3. Run the Update Package again.
* If you see the message, "This Update Package is not compatible
with any of the devices detected on your system", for a supported
device, ensure that you have the latest Dell drivers for
your system from the Dell Support website at "www.support.dell.com."
* Some distributions of Linux may automatically mount a USB flash
drive with the "-noexec" option. This prevents the execution of any