Dell PowerEdge FD332 User Manual
Item
Non-Volatile
Quantity
Reference Designator
Size
Storage Controller
NVSRAM
Non-volatile
1
U1033
128KB
FRU
Non-volatile
1
U1019
256B
1-Wire EEPROM
Non-volatile
1
U1004
128B
SPD
Non-volatile
1
U22
256B
SBR
Non-volatile
1
U1020
8KB
Flash
Non-volatile
1
U1049
16MB
ONFI Backup Flash
Non-volatile
1
U1059
4GB
SDRAM
Volatile
5
U1043-U1047
512MB/1GB
Storage Controller
NVSRAM
Non-volatile
2
U1033, U1035
128KB
FRU
Non-volatile
2
U1019, U1023
256B
1-Wire EEPROM
Non-volatile
2
U1004, U1007
128B
SPD
Non-volatile
2
U22, U23
256B
SBR
Non-volatile
2
U1020, U1024
8KB
Statement of Volatility – Dell PowerEdge FD332
Dell PowerEdge FD332 contains both volatile and non-volatile (NV) components. Volatile components lose their
data immediately upon removal of power from the component. Non-volatile components continue to retain their
data even after the power has been removed from the component. Components chosen as user-definable
configuration options (those not soldered to the motherboard) are not included in the Statement of Volatility.
Configuration option information (pertinent to options such as microprocessors, remote access controllers, and
storage controllers) is available by component separatel y. The following NV components are present in the
PowerEdge FD332.
or Volatile
Module (Single
PERC)
Module (Dual
PERC)
Flash Non-volatile 2 U1049, U1051 16MB
ONFI Backup Flash Non-volatile 2 U1059, U1066 4GB
Item
Non-Volatile
Quantity
Reference Designator
Size
NVSRAM
Non-volatile
2
U1033, U1035
128KB
SDRAM
Volatile
10
U1043-U1047, U1076-U1080
512MB/1GB
Storage Expander
Module
NVSRAM
Non-volatile
1
U22
128KB
Flash ROM
Non-volatile
1
U19
128MB
BP FRU EEPROM
Non-volatile
1
U2
256byte
SEM FRU EEPROM
Non-volatile
1
U7
512byte
Mid-plane Interface Module
FRU EEPOM
Non-volatile
1
U3
4KB
Item
Type (e.g. Flash PROM, EEPROM)
Can user
Purpose? (e.g. boot
Storage Controller Module
NVSRAM
NVSRAM
No
Configuration data
Card manufacturing
Holds default
Memory
Holds cache data
or Volatile
programs or
operating system
write data to it
during normal
operation?
(Single PERC)
FRU FRU No
1-Wire EEPROM 1-Wire EEPROM No
code)
information
controller
properties/settings
SPD SPD No
configuration data
SBR SBR No Bootloader
Flash Flash No Card firmware
ONFI Backup Flash ONFI Backup Flash No
SDRAM SDRAM No Cache for HDD I/O
during power loss
Loading...