Dell M620 User Manual

Dell PowerEdge M620 Systems Owner's Manual

Regulatory Model: HHB Regulatory Type: HHB003

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Trademarks used in this text: PowerConnect of Dell Inc.

AMD Devices, Inc. either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat

™

OpenManage

Intel

Pentium

is a registered trademark and

Microsoft

Enterprise Linux

are registered trademarks of Novell Inc. in the United States and other countries. Corporation and/or its affiliates.

™

Dell

, the Dell logo,

™

EqualLogic

Xeon

Core

AMD Opteron

Windows

are registered trademarks of Red Hat, Inc. in the United States and/or other countries.

Windows Server

Citrix

Xen

and

Dell Boomi

™

Compellent

Celeron

™

XenServer Systems, Inc. in the United States and/or other countries. trademarks or trademarks of VMware, Inc. in the United States or other countries.

™

Dell Precision

™

KACE

are registered trademarks of Intel Corporation in the U.S. and other countries.

AMD Phenom

Internet Explorer

and

VMware

™

XenMotion

™

and

vMotion

FlexAddress

AMD Sempron

MS-DOS

are either registered trademarks or trademarks of Citrix

vCenter

™

OptiPlex

™

Force10

™

Windows Vista

is a registered trademark of Oracle

Oracle

vCenter SRM

is a registered trademark of International

IBM

™

Latitude

are trademarks of Advanced Micro

™

Venue

PowerEdge

™

and

Active Directory

and

™

and

vSphere

Business Machines Corporation.

2013 - 09

Rev. A03

™

Vostro

Red Hat

Novell

PowerVault

™

are trademarks

are

and

SUSE

are registered

™

Contents

1 About Your System......................................................................................................................7

Front-Panel Features And Indicators....................................................................................................................... 7

Using USB Diskette or USB DVD/CD Drives............................................................................................................. 7

Hard-Drive/SSD Indicator Patterns.......................................................................................................................... 8

Other Information You May Need.............................................................................................................................9

2 Using The System Setup And Boot Manager.......................................................................11

Choosing The System Boot Mode.......................................................................................................................... 11

Entering System Setup............................................................................................................................................12

Responding To Error Messages.......................................................................................................................12

Using The System Setup Navigation Keys....................................................................................................... 12

System Setup Options.............................................................................................................................................12

System Setup Main Screen..............................................................................................................................12

System BIOS Screen........................................................................................................................................13

System Information Screen..............................................................................................................................13

Memory Settings Screen................................................................................................................................. 14

Processor Settings Screen.............................................................................................................................. 14

SATA Settings Screen......................................................................................................................................15

Boot Settings Screen....................................................................................................................................... 15

Integrated Devices Screen.............................................................................................................................. 16

Serial Communications Screen........................................................................................................................17

System Profile Settings Screen........................................................................................................................18

System Security Screen...................................................................................................................................18

Miscellaneous Settings....................................................................................................................................19

System And Setup Password Features.................................................................................................................. 20

Assigning A System And/Or Setup Password..................................................................................................20

Using Your System Password To Secure Your System....................................................................................21

Deleting Or Changing An Existing System And/Or Setup Password................................................................21

Operating With A Setup Password Enabled.................................................................................................... 22

Entering The UEFI Boot Manager........................................................................................................................... 22

Using The Boot Manager Navigation Keys......................................................................................................22

Boot Manager Screen......................................................................................................................................23

UEFI Boot Menu............................................................................................................................................... 23

Embedded System Management............................................................................................................................23

iDRAC Settings Utility..............................................................................................................................................23

Entering The iDRAC Settings Utility..................................................................................................................24

3 Installing Blade Components.................................................................................................. 25

Recommended Tools.............................................................................................................................................. 25

Removing And Installing A Blade........................................................................................................................... 25

Removing The Blade........................................................................................................................................ 25

Installing The Blade..........................................................................................................................................26

Opening And Closing The Blade............................................................................................................................. 27

Opening The Blade...........................................................................................................................................27

Closing The Blade............................................................................................................................................ 28

Inside The Blade.....................................................................................................................................................28

Cooling Shroud....................................................................................................................................................... 29

Removing The Cooling Shroud......................................................................................................................... 29

Installing The Cooling Shroud.......................................................................................................................... 30

System Memory......................................................................................................................................................30

General Memory Module Installation Guidelines............................................................................................ 32

Mode-Specific Guidelines................................................................................................................................32

Sample Memory Configurations.......................................................................................................................33

Removing Memory Modules............................................................................................................................ 36

Installing Memory Modules............................................................................................................................. 37

I/O Module Mezzanine Cards................................................................................................................................. 38

Mezzanine Card Installation Guidelines...........................................................................................................38

Removing A Mezzanine Card........................................................................................................................... 38

Installing A Mezzanine Card.............................................................................................................................39

Management Riser Card.........................................................................................................................................40

Replacing The SD Card.................................................................................................................................... 40

Internal USB Key.............................................................................................................................................. 41

SD vFlash Card........................................................................................................................................................42

Replacing The SD vFlash Card......................................................................................................................... 42

Network Daughter Card/LOM Riser Card............................................................................................................... 43

Removing The Network Daughter Card/LOM Riser Card.................................................................................43

Installing The Network Daughter Card/LOM Riser Card..................................................................................44

Processors..............................................................................................................................................................44

Removing A Processor.....................................................................................................................................44

Installing A Processor......................................................................................................................................48

Hard Drives/SSDs................................................................................................................................................... 49

Hard Drive/SSD Installation Guidelines........................................................................................................... 49

Removing A Hard Drive/SSD............................................................................................................................ 49

Installing A Hard Drive/SSD............................................................................................................................. 50

Shutdown Procedure For Servicing a Hard Drive/SSD....................................................................................50

Configuring The Boot Drive.............................................................................................................................. 51

Removing A Hard Drive/SSD From A Hard-Drive/SSD Carrier.........................................................................51

Installing A Hard Drive/SSD In A Hard-Drive/SSD Carrier...............................................................................51

Hard-Drive/SSD Backplane.................................................................................................................................... 52

Removing The Hard-Drive/SSD Backplane......................................................................................................52

Installing The Hard-Drive/SSD Backplane.......................................................................................................53

System Board..........................................................................................................................................................53

Removing The System Board........................................................................................................................... 53

Installing The System Board............................................................................................................................ 54

NVRAM Backup Battery......................................................................................................................................... 55

Replacing The NVRAM Backup Battery.......................................................................................................... 55

Storage Controller Card..........................................................................................................................................56

Removing The PCIe Extender Card/Storage Controller Card...........................................................................56

Installing The PCIe Extender Card/Storage Controller Card............................................................................ 57

4 Troubleshooting Your System................................................................................................. 59

Safety First—For You and Your System..................................................................................................................59

Troubleshooting System Memory...........................................................................................................................59

Troubleshooting Hard Drives..................................................................................................................................60

Troubleshooting USB Devices................................................................................................................................60

Troubleshooting An Internal SD Card.....................................................................................................................61

Troubleshooting Processors...................................................................................................................................61

Troubleshooting The Blade System Board.............................................................................................................61

Troubleshooting The NVRAM Backup Battery.......................................................................................................62

5 Using System Diagnostics....................................................................................................... 63

Dell Online Diagnostics...........................................................................................................................................63

Dell Embedded System Diagnostics....................................................................................................................... 63

When To Use The Embedded System Diagnostics.......................................................................................... 63

Running The Embedded System Diagnostics...................................................................................................63

Running Embedded System Diagnostics From An External Media..................................................................64

System Diagnostic Controls............................................................................................................................. 64

6 Jumpers And Connectors........................................................................................................ 65

System Board Jumper Settings.............................................................................................................................. 65

System Board Connectors......................................................................................................................................66

Disabling A Forgotten Password............................................................................................................................ 67

7 Technical Specifications......................................................................................................... 69

8 System Messages.....................................................................................................................73

LCD Status Messages.............................................................................................................................................73

Viewing LCD Messages................................................................................................................................... 73

Removing LCD Messages.................................................................................................................................73

System Error Messages..........................................................................................................................................73

Warning Messages...............................................................................................................................................142

Diagnostic Messages........................................................................................................................................... 142

Alert Messages.....................................................................................................................................................142

9 Getting Help..............................................................................................................................143

Contacting Dell..................................................................................................................................................... 143

About Your System

Front-Panel Features And Indicators

Figure 1. Front-Panel Features and Indicators

1. blade handle release button

2. hard drives (2)

3. status/identification indicator

4. USB connectors (2)

5. blade power button

Using USB Diskette or USB DVD/CD Drives

The blade has USB ports on the front which allow you to connect a USB diskette drive, USB flash drive, USB DVD/CD drive, keyboard, or mouse. The USB drives can be used to configure the blade.

NOTE: Your blade supports only Dell-branded USB 2.0 drives. Use the optional external drive storage tray to support the drive while in use.

NOTE: If the drive must be designated as the boot drive, connect the USB drive, restart the system, then enter the System Setup and set the drive as first in the boot sequence. The USB device is displayed in the boot order setup screen only if it is attached to the system before you run the System Setup. You can also select the boot device by pressing <F11> during system start-up and selecting a boot device for the current boot sequence.

Hard-Drive/SSD Indicator Patterns

The hard-drive/SSD indicators display different patterns as drive events occur in the system.

NOTE: The blade must have a hard drive/SSD or a hard-drive blank installed in each drive bay.

Figure 2. Hard-Drive/SSD Indicators

1. drive activity indicator (green)

2. drive status indicator (green and amber)

NOTE: If the drive is in Advanced Host Controller Interface (AHCI) mode, the status LED (on the right side) does not function and remains off.

Drive-Status Indicator Pattern

Blinks green two times per second

Off Drive ready for insertion or removal

Blinks green, amber, and off

Blinks amber four times per second

Blinks green slowly Drive rebuilding

Steady green Drive online

Blinks green three seconds, amber three seconds, and off six seconds

Condition

Identifying drive or preparing for removal

NOTE: The drive status indicator remains off until all drives are initialized after system power is applied. Drives are not ready for insertion or removal during this time.

Drive predicted failure

Drive failed

Rebuild aborted

Other Information You May Need

WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be included within this document or as a separate document.

• The

• For the full name of an abbreviation or acronym used in this document, see the Glossary at www.dell.com/

• Dell systems management application documentation provides information about installing and using the

• Any media that ships with your system that provides documentation and tools for configuring and managing your

Getting Started Guide

specifications.

Rack Installation Instructions

rack.

Dell PowerEdge M1000e Enclosure Owner’s Manual

describes how to troubleshoot the enclosure and install or replace the enclosure's components.

Dell Chassis Management Controller User’s Guide

the Chassis Management Controller (CMC).

support/manuals.

systems management software.

system, including those pertaining to the operating system, system management software, system updates, and system components that you purchased with your system.

NOTE: Always check for updates on www.dell.com/support/manuals and read the updates first because they often supersede information in other documents.

provides an overview of system features, setting up your system, and technical

included with your rack solution describes how to install your system into a

provides information about enclosure features and

provides information on installing, configuring and using

Using The System Setup And Boot Manager

System Setup enables you to manage your system hardware and specify BIOS-level options.

The following keystrokes provide access to system features during startup:

Keystroke Description

<F2> Enters the System Setup.

<F10> Enters System Services, which opens the Dell Lifecycle Controller 2 (LC2). The Dell LC2 allows

you to access utilities such as embedded system diagnostics. For more information, see the Dell LC2 documentation.

<F11> Enters the BIOS Boot Manager or the Unified Extensible Firmware Interface (UEFI) Boot

Manager, depending on the system's boot configuration.

<F12> Starts Preboot eXecution Environment (PXE) boot.

From the System Setup, you can:

• Change the NVRAM settings after you add or remove hardware

• View the system hardware configuration

• Enable or disable integrated devices

• Set performance and power management thresholds

• Manage system security

You can access the System Setup using the:

• Standard graphical browser, which is enabled by default

• Text browser, which is enabled using Console Redirection

To enable Console Redirection, in System Setup, select System BIOS → Serial Communication screen → Serial Communication, select On with Console Redirection.

NOTE: By default, help text for the selected field is displayed in the graphical browser. To view the help text in the text browser, you must press <F1>.

Choosing The System Boot Mode

System Setup enables you to specify the boot mode for installing your operating system:

• BIOS boot mode (the default) is the standard BIOS-level boot interface.

• UEFI boot mode is an enhanced 64-bit boot interface based on Unified Extensible Firmware Interface (UEFI) specifications that overlays the system BIOS.

You must select the boot mode in the Boot Mode field of the Boot Settings Screen of System Setup. Once you specify the boot mode, the system boots in the specified boot mode and you proceed then to install your operating system from that mode. Thereafter, you must boot the system in the same boot mode (BIOS or UEFI) to access the installed operating system. Trying to boot the operating system from the other boot mode will cause the system to halt at startup.

NOTE: Operating systems must be UEFI-compatible to be installed from the UEFI boot mode. DOS and 32-bit operating systems do not support UEFI and can only be installed from the BIOS boot mode.

NOTE: For the latest information on supported operating systems, see dell.com/ossupport.

Entering System Setup

1. Turn on or restart your system.

2. Press <F2> immediately after you see the following message:

<F2> = System Setup

If your operating system begins to load before you press <F2>, allow the system to finish booting, and then restart your system and try again.

Responding To Error Messages

If an error message is displayed while the system is booting, make a note of the message. See System Error Messages section of this manual for an explanation of the message and suggestions for correcting errors.

NOTE: After installing a memory upgrade, it is normal for your system to display a message the first time you start your system.

Using The System Setup Navigation Keys

Keys Action

Up arrow Moves to the previous field.

Down arrow Moves to the next field.

<Enter> Allows you to type in a value in the selected field (if applicable) or follow the link in the field.

Spacebar Expands or collapses a drop-down list, if applicable.

<Esc> Moves to the previous page until you view the main screen. Pressing <Esc> in the main screen

exits System Setup. A message prompts you to save any unsaved changes.

<F1> Displays the System Setup help file.

NOTE: For most of the options, any changes that you make are recorded but do not take effect until you restart the system.

System Setup Options

System Setup Main Screen

NOTE: Press <Alt><F> to reset the BIOS or UEFI settings to their default settings.

Menu Item

System BIOS This option is used to view and configure BIOS settings.

iDRAC Settings This option is used to view and configure iDRAC settings.

Description

Menu Item Description

Device Settings This option is used to view and configure device settings.

System BIOS Screen

NOTE: The options for System Setup change based on the system configuration.

NOTE: System Setup defaults are listed under their respective options in the following sections, where applicable.

Menu Item Description

iDRAC Settings This option is used to view and configure iDRAC settings.

Device Settings This option is used to view and configure device settings.

System Information Displays information about the system such as the system model name, BIOS version, Service

Tag, and so on.

Memory Settings Displays information and options related to installed memory.

Processor Settings Displays information and options related to the processor such as speed, cache size, and so

on.

SATA Settings Displays options to enable or disable the integrated SATA controller and ports.

Boot Settings Displays options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS

boot settings.

Integrated Devices Displays options to enable or disable integrated device controllers and ports, and to specify

related features and options.

Serial Communication Displays options to enable or disable the serial ports and specify related features and options.

System Profile Settings

System Security Displays options to configure the system security settings like, system password, setup

Miscellaneous Settings

Displays options to change the processor power management settings, memory frequency, and so on.

password, TPM security, and so on. It also enables or disables support for local BIOS update and the power button on the system.

Displays options to change the system date, time, and so on.

System Information Screen

Menu Item Description

System Model Name Displays the system model name.

System BIOS Version Displays the BIOS version installed on the system.

System Service Tag Displays the system Service Tag.

System Manufacturer Displays the name of system manufacturer.

System Manufacturer Contact Information

Displays the contact information of the system manufacturer.

Memory Settings Screen

Menu Item Description

System Memory Size Displays the amount of memory installed in the system.

System Memory Type Displays the type of memory installed in the system.

System Memory Speed

System Memory Voltage

Video Memory Displays the amount of video memory.

System Memory Testing

Memory Operating Mode

Node Interleaving If this field is Enabled, memory interleaving is supported if a symmetric memory configuration is

Displays the system memory speed.

Displays the system memory voltage.

Specifies whether system memory tests are run during system boot. Options are Enabled and Disabled. By default, the System Memory Testing option is set to Disabled.

Specifies the memory operating mode. The options available depending on the memory configuration of your system are Optimizer Mode, Advanced ECC Mode, Mirror Mode, Spare Mode, Spare with Advanced ECC Mode, and Dell Fault Resilient Mode. By default, the Memory Operating Mode option is set to Optimizer Mode.

NOTE: The Memory Operating Mode can have different defaults and available options based on the memory configuration.

NOTE: The Dell Fault Resilient Mode establishes an area of memory that is fault resilient. This mode can be used by an operating system that supports the feature to load critical applications or enables the operating system kernel to maximize system availability.

installed. If Disabled, the system supports Non-Uniform Memory architecture (NUMA) (asymmetric) memory configurations. By default, Node Interleaving option is set to Disabled.

Processor Settings Screen

Menu Item Description

Logical Processor Allows you to enable or disable logical processors and display the number of logical

processors. If the Logical Processor option is set to Enabled, the BIOS displays all the logical processors. If this option is set to Disabled, the BIOS only displays one logical processor per core. By default, the Logical Processor option is set to Enabled.

QPI Speed Allows you to set the QuickPath Interconnect data rate settings. By default, the QPI Speed

option is set to Maximum data rate.

NOTE: The QPI Speed option is displayed only when both the processors are installed.

Alternate RTID (Requestor Transaction ID) Setting

Allows you to allocate more RTIDs to the remote socket increasing cache performance between the sockets or work in normal mode for NUMA. By default, the Alternate RTID (Requestor Transaction ID) Setting is set to Disabled.

Menu Item Description

Virtualization Technology

Adjacent Cache Line Prefetch

Hardware Prefetcher Allows you to enable or disable hardware prefetcher. By default, the Hardware Prefetcher

DCU Streamer Prefetcher

DCU IP Prefetcher Allows you to enable or disable DCU IP prefetcher. By default, the DCU IP Prefetcher option is

Execute Disable Allows you enable or disable execute disable memory protection technology. By default, the

Number of Cores per Processor

Processor 64-bit Support

Processor Core Speed

Processor Bus Speed Displays the bus speed of the processors.

Allows you enable or disable the additional hardware capabilities provided for virtualization. By default, the Virtualization Technology option is set to Enabled.

Allows you to optimize the system for applications that require high utilization of sequential memory access. By default, the Adjacent Cache Line Prefetch option is set to Enabled. You can disable this option for applications that require high utilization of random memory access.

option is set to Enabled.

Allows you to enable or disable DCU streamer prefetcher. By default, the DCU Streamer Prefetcher option is set to Enabled.

set to Enabled.

Execute Disable option is set to Enabled.

Allows you to control the number of enabled cores in each processor. By default, the Number of Cores per Processor option is set to All.

Specifies if the processor(s) support 64-bit extensions.

Displays the maximum core frequency of the processor.

NOTE: The processor bus speed option is displayed only when both the processors are installed.

Processor X FamilyModel-Stepping

Displays the family and model number of each processor. A submenu displays the core speed, the amount of cache memory, and the number of cores of the processor(s).

SATA Settings Screen

Menu Item Description

Embedded SATA Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID modes. By default, Embedded

SATA is set to AHCI.

Port A Auto enables BIOS support for the device attached to SATA port A. Off disables BIOS support

for the device. By default, Port A is set to Auto.

Port B Auto enables BIOS support for the device attached to SATA port B. Off disables BIOS support

for the device. By default, Port B is set to Auto.

Boot Settings Screen

Menu Item

Boot Mode Allows you to set the boot mode of the system.

Description

Menu Item Description

CAUTION: Switching the boot mode may prevent the system from booting if the operating system is not installed in the same boot mode.

If the operating system supports UEFI, you can set this option to UEFI. Setting this field to BIOS allows compatibility with non-UEFI operating systems. By default, the Boot Mode option is set to BIOS.

NOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting this field to BIOS disables the UEFI Boot Settings menu.

Boot Sequence Retry Allows you to enable or disable the boot sequence retry feature. If this field is enabled and the

system fails to boot, the system reattempts the boot sequence after 30 seconds. By default, the Boot Sequence Retry option is set to Disabled.

BIOS Boot Settings Allows you to enable or disable BIOS Boot options.

NOTE: This option is enabled only if the boot mode is BIOS.

UEFI Boot Settings Allows you to enable or disable UEFI Boot options. The Boot options include IPv4 PXE and IPv6

PXE. By default, the UEFI PXE boot protocol is set to IPv4.

NOTE: This option is enabled only if the boot mode is UEFI.

One-Time Boot Allows you to enable or disable a one-time boot from a selected device.

Integrated Devices Screen

Menu Item Description

Integrated RAID Controller

User Accessible USB Ports

Internal USB Port Allows you to enable or disable the internal USB port. By default, the Internal USB Port option

Internal SD Card Port Enables or disables the system’s internal SD card port. By default, Internal SD Card Port option

Internal SD Card Redundancy

Integrated Network Card 1

Allows you to enable or disable the integrated RAID controller. By default, the Integrated RAID Controller option is set to Enabled.

Allows you enable or disable the user accessible USB ports. Selecting Only Back Ports On disables the front USB ports and selecting All Ports Off disables both front and back USB ports. By default, the User Accessible USB Ports option is set to All Ports On.

is set to On.

NOTE: This option is displayed only if IDSDM is installed on the system board.

If set to Mirror mode, data is written on both SD cards. If any one of the SD card fails, data is written to the active SD card. Data from this card is copied to the replacement SD card at the next boot. By default, Internal SD Card Redundancy option is set to Mirror.

NOTE: This option is displayed only if IDSDM is installed on the system board.

Allows you to enable or disable the integrated network card 1. By default, the Integrated Network Card 1 option is set to Enabled.

Menu Item Description

OS Watchdog Timer Allows you to enable or disable the OS watchdog timer. When this field is enabled, the

operating system initializes the timer and the OS watchdog timer helps in recovering the operating system. By default, the OS Watchdog Timer option is set to Disabled.

Embedded Video Controller

SR-IOV Global Enable Allows you to enable or disable the BIOS configuration of Single Root I/O Virtualization (SR-

Memory Mapped I/O above 4GB

Mezzanine Slot Disablement

Allows you to enable or disable the Embedded Video Controller. By default, the embedded video controller is Enabled.

IOV) devices. By default, the SR-IOV Global Enable option is set to Disabled.

Allows you to enable support for PCIe devices that require large amounts of memory. By default, the option is set to Enabled.

Allows you to enable or disable available mezzanine card/PCIe mezzanine card slots on your system. The Slot Disablement feature controls the configuration of mezzanine cards/PCIe mezzanine cards installed in the specified slot.

CAUTION: Slot disablement must be used only when the installed peripheral card is preventing booting into the Operating System or causing delays in system startup. If the slot is disabled, both the Option ROM and UEFI driver are disabled.

NOTE: Use this option only for troubleshooting purposes. If one or more of the mezzanine card/PCIe mezzanine card slots are disabled, an error message is displayed during the system startup.

For proper operation, make sure that the server module has two mezzanine cards/PCIe mezzanine cards installed and both cards are set to Enabled.

Serial Communications Screen

Menu Item Description

Serial Communication Allows you to enable the COM port or Console Redirection options.

Serial Port Address Allows you to set the port address for serial devices. By default, the Serial Port Address option

is set to COM1.

NOTE: Only Serial Device 2 can be used for Serial Over LAN (SOL). To use console redirection by SOL, configure the same port address for console redirection and the serial device.

Failsafe Baud Rate Displays the failsafe baud rate for console redirection. The BIOS attempts to determine the

baud rate automatically. This failsafe baud rate is used only if the attempt fails and the value must not be changed. By default, the Failsafe Baud Rate option is set to 11520.

Remote Terminal Type

Redirection After Boot

Allows you to set the remote console terminal type. By default, the Remote Terminal Type option is set to VT 100/VT220.

Allows you to enable or disable to the BIOS console redirection when the operating system is loaded. By default, the Redirection After Boot option is set to Enabled.

System Profile Settings Screen

Menu Item Description

System Profile Allows you to set the system profile. If you set the System Profile option to a mode other than

Custom, the BIOS automatically sets the rest of the options. You can only change the rest of the options if the mode is set to Custom. By default, the System Profile option is set to Performance Per Watt Optimized (DAPC). DAPC is Dell Active Power Controller.

NOTE: The following parameters are available only when the System Profile is set to Custom.

CPU Power Management

Memory Frequency Allows you to set the memory frequency. By default, the Memory Frequency option is set to

Turbo Boost Allows you to enable or disable the processor to operate in turbo boost mode. By default, the

C1E Allows you to enable or disable the processor to switch to a minimum performance state when

C States Allows you to enable or disable the processor to operate in all available power states. By

Monitor/Mwait Allows you to enable Monitor/Mwait instructions in the processor. By default, the Monitor/

Memory Patrol Scrub Allows you to set the memory patrol scrub frequency. By default, the Memory Patrol Scrub

Memory Refresh Rate Allows you to set the memory refresh rate. By default, the Memory Refresh Rate option is set to

Allows you to set the CPU power management. By default, the CPU Power Management option is set to System DBPM (DAPC). DBPM is Demand-Based Power Management.

Maximum Performance.

Turbo Boost option is set to Enabled.

it is idle. By default, the C1E option is set to Enabled.

default, the C States option is set to Enabled.

Mwait option is set to Enabled for all system profiles, except Custom.

NOTE: This option can be disabled only if the C States option in Custom mode is disabled.

NOTE: When C States is enabled in Custom mode, changing the Monitor/Mwait setting does not impact system power/performance.

option is set to Standard.

1x.

Memory Operating Voltage

Collaborative CPU Performance Control

Allows you to set the DIMM voltage selection. When set to Auto, the system automatically sets the system voltage to the optimal setting based on the DIMM capacity and the numbers of DIMMs installed. By default, the Memory Operating Voltage option is set to Auto.

When set to enabled, the CPU power management is controlled by the OS DBPM and the System DBPM (DAPC). By default, the option is set to Disabled

System Security Screen

Menu Item

Intel AES-NI The Intel AES-In option improves the speed of applications by performing encryption and

Description

decryption using the Advanced Encryption Standard set and is set to Enabled by default.

Menu Item Description

System Password Allows you to set the system password. This option is read-only if the password jumper is not

installed in the system.

Setup Password Allows you to set the setup password. This option is read-only if the password jumper is not

installed in the system.

Password Status Allows you to lock the system password. By default, the Password Status option is set to

Unlocked.

TPM Security Allows you to control the reporting mode of the Trusted Platform Module (TPM). By default, the

TPM Security option is set to Off. You can only modify the TPM Status, TPM Activation , and Intel TXT fields if the TPM Status field is set to either On with Pre-boot Measurements or On without Pre-boot Measurements.

TPM Activation Allows you to change the operational state of the TPM. By default, the TPM Activation option is

set to No Change.

TPM Status Displays the TPM status.

TPM Clear

Intel TXT Allows you enable or disable Intel Trusted Execution Technology. To enable Intel TXT,

BIOS Update Control Allows you to update the BIOS using either DOS or UEFI shell-based flash utilities. For

Power Button Allows you to enable or disable the power button on the front of the system. By default, the

AC Power Recovery Allows you to set how the system reacts after AC power is restored to the system. By default,

CAUTION: Clearing the TPM results in loss of all keys in the TPM. The loss of TPM keys may affect booting to the operating system.

Allows you to clear all the contents of the TPM. By default, the TPM Clear option is set to No.

Virtualization Technology must be enabled and TPM Security must be enabled with Pre-boot measurements. By default, the Intel TXT option is set to Off.

environments that do not require local BIOS updates, it is recommended to set this field to Limited. By default, the Local BIOS Update Support option is set to Unlocked.

NOTE: BIOS updates using Dell Update Package is not affected by this option.

Power Button option is set to Enabled.

the AC Power Recovery option is set to Last.

Miscellaneous Settings

Menu Item Description

System Time Allows you to set the time on the system.

System Date Allows you to set the date on the system.

Asset Tag Displays the asset tag and allows you to modify it for security and tracking purposes.

Keyboard NumLock Allows you to set whether the system boots with the NumLock enabled or disabled. By default

the Keyboard NumLock is set to On.

NOTE: This field does not apply to 84-key keyboards.

Menu Item Description

Report Keyboard Errors

F1/F2 Prompt on Error Allows you to enable or disable the F1/F2 prompt on error. By default, F1/F2 Prompt on Error is

In-System Characterization

Allows you to set whether keyboard-related error messages are reported during system boot. By default, the Report Keyboard Errors field is set to Report.

set to Enabled.

This field enables or disables In-System Characterization. By default, In-System Characterization is set to Enabled.

System And Setup Password Features

You can create a system password and a setup password to secure your system. To enable creation of the system and setup password, the password jumper must be set to enabled. For more information on the password jumper settings, see System Board Jumper Settings.

System password This is the password that you must enter to log on to your system.

Setup password This is the password that you must enter to access and make changes to the BIOS or UEFI

settings of your system.

CAUTION: The password features provide a basic level of security for the data on your system.

CAUTION: Anyone can access the data stored on your system if the system is running and unattended.

NOTE: Your system is shipped with the system and setup password feature disabled.

Assigning A System And/Or Setup Password

NOTE: The password jumper enables or disables the System Password and Setup Password features. For more information on the password jumper settings, see System Board Jumper Settings.

You can assign a new System Password and/or Setup Password or change an existing System Password and/or Setup Password only when the password jumper setting is enabled and Password Status is Unlocked. If the Password Status is Locked, you cannot change the System Password and/or Setup Password.

If the password jumper setting is disabled, the existing System Password and Setup Password is deleted and you need not provide the system password to log on to the system.

To assign a system and/or setup password:

1. To enter System Setup, press <F2> immediately after a power-on or reboot.

2. In the System Setup Main Menu, select System BIOS and press <Enter>.

The System BIOS screen is displayed.

3. In the System BIOS screen, select System Security and press <Enter>.

The System Security screen is displayed.

4. In the System Security screen, verify that Password Status is Unlocked.

5. Select System Password , enter your system password, and press <Enter> or <Tab>.

Use the following guidelines to assign the system password:

– A password can have up to 32 characters.

– The password can contain the numbers 0 through 9.

– Only lower case letters are valid, upper case letters are not allowed.

– The following special characters are allowed: space, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`).

A message prompts you to re-enter the system password.

6. Re-enter the system password that you entered earlier and click OK.

7. Select Setup Password, enter your system password and press <Enter> or <Tab>.

A message prompts you to re-enter the setup password.

8. Re-enter the setup password that you entered earlier and click OK.

9. Press <Esc> to save the changes.

NOTE: Password protection does not take effect until the system reboots.

Using Your System Password To Secure Your System

NOTE: If you have assigned a setup password, the system accepts your setup password as an alternate system password.

1. Turn on or reboot your system.

2. Type your password and press <Enter>.

When Password Status is Locked, type the password and press <Enter> when prompted at reboot.

If an incorrect system password is entered, the system displays a message and prompts you to re-enter your password. You have three attempts to enter the correct password. After the third unsuccessful attempt, the system displays an error message that the system has halted and must be powered down.

Even after you shut down and restart the system, the error message is displayed until the correct password is entered.

NOTE: You can use the Password Status option in conjunction with the System Password and Setup Password options to protect your system from unauthorized changes.

Deleting Or Changing An Existing System And/Or Setup Password

Ensure that the Password jumper is set to enabled and the Password Status is Unlocked before attempting to delete or change the existing System and/or Setup password. You cannot delete or change an existing System or Setup password if the Password Status is Locked.

To delete or change the existing System and/or Setup password:

1. To enter System Setup, press <F2> immediately after a power-on or reboot.

2. In the System Setup Main Menu, select System BIOS and press <Enter>.

The System BIOS screen is displayed.

3. In the System BIOS Screen, select System Security and press <Enter>.

The System Security screen is displayed.

4. In the System Security screen, verify that Password Status is Unlocked.

5. Select System Password, alter or delete the existing system password and press <Enter> or <Tab>.

6. Select Setup Password, alter or delete the existing setup password and press <Enter> or <Tab>.

NOTE: If you change the System and/or Setup password a message prompts you to re-enter the new password. If you delete the System and/or Setup password, a message prompts you to confirm the deletion.

7. Press <Esc> to save the changes.

NOTE: You can disable password security while logging on to the system. To disable the password security, turn on or reboot your system, type your password and press <Ctrl><Enter>.

Operating With A Setup Password Enabled

If Setup Password is Enabled, enter the correct setup password before modifying most of the System Setup options.

If you do not enter the correct password in three attempts, the system displays the message

Incorrect Password! Number of unsuccessful password attempts: <x> System Halted! Must power down.

Even after you shut down and restart the system, the error message is displayed until the correct password is entered. The following options are exceptions:

• If System Password is not Enabled and is not locked through the Password Status option, you can assign a system password.

• You cannot disable or change an existing system password.

NOTE: You can use the Password Status option in conjunction with the Setup Password option to protect the system password from unauthorized changes.

Entering The UEFI Boot Manager

NOTE: Operating systems must be 64-bit UEFI-compatible (for example, Microsoft Windows Server 2008 x64 version) to be installed from the UEFI boot mode. DOS and 32-bit operating systems can only be installed from the BIOS boot mode.

The Boot Manager enables you to:

• Add, delete, and arrange boot options

• Access System Setup and BIOS-level boot options without rebooting

To enter the Boot Manager:

1. Turn on or restart your system.

2. Press <F11> after you see the following message:

<F11> = UEFI Boot Manager

If your operating system begins to load before you press <F11>, allow the system to finish booting, and then restart your system and try again.

Using The Boot Manager Navigation Keys

Key Description

Up arrow Moves to the previous field.

Down arrow Moves to the next field.

<Enter> Allows you to type in a value in the selected field (if applicable) or follow the link in the field.

Spacebar Expands or collapses a drop-down list, if applicable.

<Esc> Moves to the previous page till you view the main screen. Pressing <Esc> in the main screen

exits System Setup. A message prompts you to save any unsaved changes.

<F1> Displays the System Setup help file.

NOTE: For most of the options, any changes that you make are recorded but do not take effect until you restart the system.

Boot Manager Screen

Menu Item Description

Continue Normal Boot

BIOS Boot Menu Displays the list of available BIOS boot options (marked with asterisks). Select the boot option

UEFI Boot Menu Displays the list of available UEFI boot options (marked with asterisks). Select the boot option

Driver Health Menu Displays a list of the drivers installed on the system and their health status.

Launch System Setup Enables you to access the System Setup.

System Utilities Enables you to access the BIOS Update File Explorer, run the Dell Diagnostics program, and

The system attempts to boot to devices starting with the first item in the boot order. If the boot attempt fails, the system continues with the next item in the boot order until the boot is successful or no more boot options are found.

you wish to use and press <Enter>.

you wish to use and press <Enter>. The UEFI Boot Menu enables you to Add Boot Option, Delete Boot Option, or Boot From File.

reboot the system.

UEFI Boot Menu

Menu Item Description

Boot From File Sets a one-time boot option not included in the boot option list.

Select UEFI Boot Option

Add Boot Option Adds a new boot option.

Displays the list of available UEFI boot options (marked with asterisks), select the boot option you wish to use and press <Enter>.

Delete Boot Option Deletes an existing boot option.

Embedded System Management

The Dell Lifecycle Controller provides advanced embedded systems management throughout the server’s lifecycle. The Lifecycle Controller can be started during the boot sequence and can function independently of the operating system.

NOTE: Certain platform configurations may not support the full set of features provided by the Lifecycle Controller.

For more information about setting up the Lifecycle Controller, configuring hardware and firmware, and deploying the operating system, see the Lifecycle Controller documentation at dell.com/support/manuals.

iDRAC Settings Utility

The iDRAC Settings utility is an interface to setup and configure the iDRAC parameters using UEFI. You can enable or disable various iDRAC parameters using the iDRAC7 Settings Utility, for example:

NOTE: Some of the features mentioned in the list may require the iDRAC7 Enterprise License upgrade.

• Configure, enable, or disable the iDRAC local area network through the dedicated iDRAC Enterprise card port or the embedded NIC

• Enable or disable IPMI over LAN

• Enable a LAN Platform Event Trap (PET) destination

• Attach or detach the Virtual Media devices

For more information on using iDRAC7, see the iDRAC7 User's Guide, at dell.com/supoort/manuals.

Entering The iDRAC Settings Utility

1. Turn on or restart the managed system.

2. Press <F2> during Power-on Self-test (POST).

3. In the System Setup Main Menu page, click iDRAC Settings.

The iDRAC Settings page is displayed.

Installing Blade Components

Recommended Tools

You may need the following items to perform the procedures in this section:

• #1 and #2 Phillips screwdrivers

• T8 and T10 Torx drivers

• Wrist grounding strap

Removing And Installing A Blade

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

NOTE: These procedures are applicable only for full-height and half-height blades. For information on removing and installing quarter-height blades from a sleeve, see the blade's Owner's Manual at support.dell.com/manuals.

Removing The Blade

1. Power down the blade using OS commands or the CMC, and ensure that the blade's power is off.

When a blade is powered off, its front-panel power indicator is off.

2. Before removing half-height blades 11 or 12, rotate the LCD panel to the storage position to prevent accidental damage to the LCD screen.

3. Press the release button on the handle.

4. Pull out the handle to unlock the blade from the enclosure.

5. Slide the blade out of the enclosure.

CAUTION: To protect the I/O connector pins, install the I/O connector cover any time a blade is removed from the enclosure.

6. Install the I/O connector cover over the I/O connector.

CAUTION: If you are permanently removing the blade, install a blade blank. Operating the system for extended periods of time without a blade blank installed can cause the enclosure to overheat.

Figure 3. Removing or Installing the Blade

1. blade handle

2. release button

3. blade

4. guide rail on enclosure

5. guide rail on blade (or blade blank)

Installing The Blade

1. If you are installing a new blade, remove the plastic cover from the I/O connector(s) and save for future use.

2. Orient the blade so that the handle is on the left side of the blade.

3. If you are installing a half-height blade in bays 11 or 12, rotate the LCD module to the horizontal storage position to prevent accidental damage to the LCD screen.

4. If you are installing a half-height blade in one of the eight upper bays, align the guide rail on the upper edge of the blade so that the rail fits between the plastic guides on the enclosure.

If you are installing a half-height blade in one of the eight lower bays, align the edge of the blade with the guide rail on the floor of the M1000e enclosure.

5. Slide the blade into the enclosure until the handle engages and locks the blade in place.

Opening And Closing The Blade

Opening The Blade

NOTE: It is recommended that you always use a static mat and static strap while working on components in the interior of the system.

1. Remove the blade from the enclosure.

2. Install the I/O connector cover.

3. Press the release button and slide the cover toward the back of the blade.

4. Carefully lift the cover away from the blade.

Figure 4. Opening and Closing the Blade

1. I/O connector cover

2. blade cover

3. release button

4. cover alignment pins and notches

Closing The Blade

1. Ensure that no tools or parts are left inside the blade.

2. Align the notches in the edges of the chassis with the cover alignment pins on the inner sides of the cover.

3. Lower the cover onto the chassis.

4. Slide the cover until it clicks into position.

A properly seated cover is flush with the surface of the chassis.

Inside The Blade

Figure 5. Inside the Blade

1. management riser card

2. optional mezzanine card 1 - Fabric C

3. optional mezzanine card 2 - Fabric B

4. network daughter card

5. memory modules (for processor 1)

6. processor 1 and heat sink

7. cooling shroud

8. memory modules (for processor 2)

9. hard-drive/SSD backplane

10. hard drives/SSDs (2)

11. processor 2 and heat sink

12. memory modules (for processor 2)

13. memory modules (for processor 1)

Cooling Shroud

The cooling shroud covers the memory modules and directs air flow in the system.

Removing The Cooling Shroud

CAUTION: Never operate your system with the cooling shroud removed. The system may get overheated quickly, resulting in shutdown and loss of data.

1. Remove the blade from the enclosure.

2. Open the blade.

3. Hold the cooling shroud at both ends near the blade chassis and lift it up and away from the blade.

Figure 6. Installing and Removing a Cooling Shroud

1. pins under the cooling shroud (2)

2. cooling shroud

3. tabs (4)

4. holes on the heat sink (2)

5. slots on the chassis (4)

Installing The Cooling Shroud

1. Position the tabs below the shroud to align with the holes on the heat sink installed on processor socket CPU1.

2. Lower the cooling shroud into the system until the tabs on the sides of the shroud engage with the slots on the blade chassis and the pins under the shroud engage with the holes on the heat sink.

3. Close the blade.

4. Install the blade in the enclosure.

System Memory

Your system supports DDR3 unbuffered ECC DIMMs (UDIMM ECC) and registered DIMMs (RDIMMs). It supports DDR3 and DDR3L voltage specifications.

NOTE: MT/s indicates DIMM speed in MegaTransfers per second.

Memory bus operating frequency can be 1600 MT/s, 1333 MT/s, 1066 MT/s, or 800 MT/s depending on:

• DIMM type (UDIMM, RDIMM, or LRDIMM)

• DIMM configuration (number of ranks)

• maximum frequency of the DIMMs

• number of DIMMs populated per channel

• DIMM operating voltage

• system profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)

• maximum supported DIMM frequency of the processors

The system contains 24 memory sockets split into two sets of 12 sockets, one set per processor. Each 12-socket set is organized into four channels. In each channel, the release levers of the first socket are marked white, the second socket black, and the third socket green.

NOTE: DIMMs in sockets A1 to A12 are assigned to processor 1 and DIMMs in sockets B1 to B12 are assigned to processor 2.

The following table shows the memory populations and operating frequencies for the supported configurations.

DIMM Type DIMMs Populated/

UDIMM ECC 1 1333, 1066, and 800 1333, 1066, and 800 Dual rank

RDIMM 1

Channel

1.5 V 1.35 V

2 1333, 1066, and 800 1333, 1066, and 800 Dual rank

1600, 1333, 1066, and 800 1333, 1066, and 800

3 1333, 1066, and 800 1066 and 800 Dual rank

1600, 1333, 1066, and 800 1066 and 800

Operating Frequency (in MT/s) Maximum DIMM Rank/

1333, 1066, and 800 1066 and 800

Channel

Dual rank Quad rank

+ 113 hidden pages