Information in this document is subject to change without notice. Reproduction of these materials
in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell™ and the DELL logo are trademarks of Dell Inc.; Microsoft®,
Windows®, and the Windows start button logo are either trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. DellInc. disclaims any proprietary interest in
trademarks and trade names other than its own.
2015 – 06 Rev. A00
2
Contents
About Your Monitor ..................................... 5
Your monitor ships with all the components shown below. Ensure that you have
received all the components and Contact Dell if anything is missing.
NOTE: Some items may be optional and may not ship with your monitor. Some
features or media may not be available in certain countries.
•Monitor
•Stand Riser
•Stand Base
•VESA™ Screw Cover
•Power Cable (varies with countries)
•DisplayPort Cable (for E1916H
/ E1916He / E2016H / E2216H /
E2316H / E2416H)
•VGA Cable (for E2316Hr)
About Your Monitor 5
•Drivers and Documentation media
•Quick Setup Guide
•Safety and Regulatory Information
Product Features
The Dell E1916H / E1916He / E2016H / E2216H / E2316H / E2316Hr / E2416H flatpanel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display and LED
backlight. The monitor’s features include:
• E1916H / E1916He: 47.01 cm (18.51 inches) diagonal viewable image size, 1366 x
768 resolution, plus full-screen support for lower resolutions.
• E2016H: 49.41 cm (19.5 inches) diagonal viewable image size,
1600 x 900 resolution, plus full-screen support for lower resolutions.
• E2216H: 54.61 cm (21.5 inches) diagonal viewable image size,
1920 x 1080 resolution, plus full-screen support for lower resolutions.
• E2316H / E2316Hr: 58.42 cm (23.0 inches) diagonal viewable image size,
1920 x 1080 resolution, plus full-screen support for lower resolutions.
• E2416H: 60.97 cm (24.0 inches) diagonal viewable image size,
1920 x 1080 resolution, plus full-screen support for lower resolutions.
• Tilt adjustment capability.
• Removable pedestal and Video Electronics Standards Association (VESA) 100 mm
mounting holes for flexible mounting solutions.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
• Software and documentation media which includes an information file (INF), Image
Color Matching File (ICM), and product documentation.
• Energy Gauge shows the energy level being consumed by the monitor in real time.
• Analog backlight dimming control for flicker free display.
6 About Your Monitor
Identifying Parts and Controls
Front View
1. Function buttons (For more information, see Operating the Monitor)
2Power On/Off button (with LED indicator)
Back View
E1916H / E1916He / E2016H:
Back View with Monitor Stand
About Your Monitor 7
E2216H / E2316H / E2316Hr / E2416H:
LabelDescriptionUse
1VESA mounting holes (100
mm)
2Regulatory rating label Lists the regulatory approvals.
3Security lock slot Secures monitor with security lock
4Barcode serial number label Refer to this label if you need to contact
5Cable management slotUse to organize cables by placing them
Back View with Monitor Stand
To mount the monitor.
(security lock not included).
Dell for technical support.
through the slot.
Side View
Right Side
8 About Your Monitor
Bottom View
Label DescriptionUse
1AC power connectorTo connect the monitor power cable.
2Displayport connector To connect your computer to the monitor using
3VGA connector To connect your computer to the monitor using
4Dell soundbar
mounting slots
a DP cable.
a VGA cable.
To attach the optional Dell Soundbar.
Monitor Specifications
The following sections give you information about the various power management
modes and pin assignments for the various connectors of your monitor.
Power Management Modes
If you have VESA’s DPM compliance display card or software installed in your PC, the
monitor automatically reduces its power consumption when not in use. This is referred
to as Power Save Mode. If the computer detects input from keyboard, mouse, or other
input devices, the monitor automatically resumes functioning. The following table
shows the power consumption and signaling of this automatic power-saving feature:
E1916H / E1916He:
VESA Modes
Normal operation Active Active Active White17 W (Maximum)**
Active-off mode Inactive Inactive BlankGlowing
Switch off --Off Less than 0.3 W *
Horizontal
Sync
Vertical
Sync
Video
Power
Indicator
white
Power Consumption
14 W (Typical)
Less than 0.3 W
Energy StarPower Consumption
On Mode
13.3 W***
About Your Monitor 9
E2016H:
VESA Modes
Normal operation Active Active Active White19 W (Maximum)**
Active-off mode Inactive Inactive BlankGlowing
Switch off --Off Less than 0.3 W *
Horizontal
Sync
Vertical
Sync
Video
Power
Indicator
white
Power Consumption
15 W (Typical)
Less than 0.3 W
Energy StarPower Consumption
On Mode
E2216H:
VESA Modes
Normal operation Active Active Active White24 W (Maximum)**
Active-off mode Inactive Inactive BlankGlowing
Switch off --Off Less than 0.3 W *
11 W***
Horizontal
Sync
Vertical
Sync
Video
Power
Indicator
white
Power Consumption
18 W (Typical)
Less than 0.3 W
Energy StarPower Consumption
On Mode
E2316H / E2316Hr:
VESA Modes
Normal operation Active Active Active White25 W (Maximum)**
Active-off mode Inactive Inactive BlankGlowing
Switch off --Off Less than 0.3 W *
18.2 W***
Horizontal
Sync
Vertical
Sync
Video
Power
Indicator
white
Power Consumption
20 W (Typical)
Less than 0.3 W
Energy StarPower Consumption
On Mode
E2416H:
VESA Modes
Normal operation Active Active Active White27 W (Maximum)**
Active-off mode Inactive Inactive BlankGlowing
Switch off --Off Less than 0.3 W *
19.4 W***
Horizontal
Sync
Vertical
Sync
Video
Power
Indicator
white
Power Consumption
22 W (Typical)
Less than 0.3 W
Energy StarPower Consumption
On Mode
The OSD will only function in the normal operation mode. When any button except
power button is pressed in Active-off mode, the following messages will be displayed:
16.3 W***
10About Your Monitor
Activate the computer and monitor to gain access to the OSD.
* Zero-power consumption in OFF mode can only be achieved by disconnecting the
main cable from the monitor.
** Maximum power consumption with max luminance and contrast.
*** Energy consumption (On Mode) is tested at 230 Volts / 50 Hz.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
About Your Monitor 11
Pin Assignments
15-pin D-Sub connector
Pin Number Monitor Side of the 15-pin Side Signal Cable
You can install the monitor in any Plug and Play compatible system. The monitor
automatically provides the computer with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so that the system can configure itself and
optimize the monitor settings. Most monitor installations are automatic. You can select
different settings if required.
)
Pixel pitch0.265 x 0.265 mm0.27675 x 0.27675 mm
Viewing angle:
Horizontal170° typical 170° typical
Vertical160° typical160° typical
Luminance
output
250 cd/m² (typical)250 cd/m² (typical)
Contrast ratio 1000 to 1 (typical)1000 to 1 (typical)
Faceplate coating
Antiglare with hardcoating 3H
BacklightLED light bar systemLED edgelight system
Response Time
5 ms typical (white to
black, black to white)
Color Depth 16.7 mil colors16.7 mil colors
Color Gamut83 % (typical) *86 % (typical) *
Active matrix - TFT
LCD
609.7 mm
(24.0 inches)
531.36 mm
(20.91 inches)
298.89 mm
(11.77 inches)
2
158818.19 mm
(246.11 inches
2
)
Antiglare with hardcoating 3H
5 ms typical (white to
black, black to white)
* E1916H / E1916He color gamut (typical) is based on CIE1976 (82 %) and CIE1931 (72 %)
test standards. E2016H / E2416H color gamut (typical) is based on CIE1976 (86 %) and
CIE1931 (72 %) test standards. E2216H color gamut (typical) is based on CIE1976 (84 %)
and CIE1931 (72 %) test standards. E2316H / E2316Hr color gamut (typical) is based on
CIE1976 (83 %) and CIE1931 (72 %) test standards.
About Your Monitor 15
Resolution Specifications
Model numberE1916H / E1916He E2016H
Scan range
•Horizontal 30 kHz to 83 kHz (automatic)
•Vertical 56 Hz to 76 Hz (automatic)
Maximum preset
resolution
1366 x 768 at 60 Hz1600 x 900 at 60 Hz 1920 x 1080 at 60 Hz
•DisplayPort, 600mV for each differential line, 100 ohm input
impedance per differential pair
Synchronization input
signals
AC input voltage /
frequency / current
Inrush current120 V: 30 A (Max.)
Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)
100 VAC to 240 VAC / 50 Hz or
60 Hz ± 3 Hz / 1.0 A (typical)
240 V: 60 A (Max.)
E2016H / E2416H
100 VAC to 240 VAC / 50 Hz or
60 Hz ± 3 Hz / 0.8 A (typical)
Preset Display Modes
The following table lists the preset modes for which Dell guarantees image size and
centering:
E1916H / E1916He:
Horizontal
Display Mode
Frequency
(kHz)
VESA, 720 x 40031.570.128.3-/+
VESA, 640 x 480 31.559.925.2-/VESA, 640 x 48037.575.031.5-/VESA, 800 x 60037.960.3 40.0+/+
VESA, 800 x 60046.975.049.5 +/+
VESA, 1024 x 76848.460.065.0-/VESA, 1024 x 768 60.075.0 78.8 +/+
VESA, 1280 x 1024 80.0 75.0135.0+/+
VESA, 1366 x 76847.759.8 85.5+/+
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(Horizontal/
Vertical)
16 About Your Monitor
E2016H:
Horizontal
Display Mode
Frequency
(kHz)
VESA, 720 x 40031.570.128.3-/+
VESA, 640 x 480 31.559.925.2-/VESA, 640 x 48037.575.031.5-/VESA, 800 x 60037.960.340.0+/+
VESA, 800 x 60046.975.049.5 +/+
VESA, 1024 x 76848.460.065.0-/VESA, 1024 x 768 60.075.0 78.8 +/+
VESA, 1152 x 864 67.575.0 108.0+/+
VESA, 1280 x 1024 64.060.0 108.0+/+
VESA, 1280 x 1024 80.0 75.0135.0+/+
VESA, 1600 x 90060.0 60.0 108.0+/+
E2216H / E2316H / E2316Hr / E2416H:
Horizontal
Display Mode
Frequency
(kHz)
VESA, 720 x 40031.570.128.3-/+
VESA, 640 x 480 31.559.925.2-/VESA, 640 x 48037.575.031.5-/VESA, 800 x 60037.960.3 40.0+/+
VESA, 800 x 60046.975.049.5 +/+
VESA, 1024 x 76848.460.065.0-/VESA, 1024 x 768 60.075.0 78.8 +/+
VESA, 1152 x 864 67.575.0 108.0+/+
VESA, 1280 x 1024 64.060.0 108.0+/+
VESA, 1280 x 1024 80.0 75.0135.0+/+
VESA, 1600 x 90060.060.0 108.0+/+
VESA, 1920 x 108067.560.0 148.5+/+
Vertical
Frequency
(Hz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Pixel Clock
(MHz)
Sync Polarity
(Horizontal/
Vertical)
Sync Polarity
(Horizontal/
Vertical)
About Your Monitor 17
Physical Characteristics
The following table lists the monitor's physical characteristics:
Signal cable typeAnalog: D-Sub, 15 pins (cable included
Dimensions: (with stand)
for E2316Hr only)
Digital: DisplayPort, 20 pins (cable not
included for E2316Hr)
Height
Width544.8 mm
Depth
Dimensions:
(without stand)
Height
Width
Depth
Stand dimensions:
Height
Width
Depth
Weight:
Weight with packaging5.09 kg (11.22 lb)5.23 kg (11.53 lb)
Weight with stand
assembly and cables
Weight without stand
assembly (For wall
mount or VESA mount
considerations - no
cables)
Weight of stand
assembly
415.0 mm
(16.34 inches)
(21.45 inches)
180.0 mm
(7.09 inches)
322.0 mm
(12.68 inches)
544.8 mm
(21.45 inches)
50.5 mm
(1.99 inches)
177.0 mm
(6.97 inches)
250.0 mm
(9.84 inches)
180.0 mm
(7.09 inches)
3.77 kg (8.31 lb)3.84 kg (8.47 lb)
2.98 kg (6.57 lb)2.91 kg (6.42 lb)
0.52 kg (1.15 lb)0.69 kg (1.52 lb)
427.58 mm
(16.83 inches)
566.96 mm
(22.32 inches)
180.0 mm
(7.09 inches)
334.58 mm
(13.17 inches)
566.96 mm
(22.32 inches)
50.5 mm
(1.99 inches)
177.0 mm
(6.97 inches)
250.0 mm
(9.84 inches)
180.0 mm
(7.09 inches)
About Your Monitor 19
Environmental Characteristics
The following table lists the environmental conditions for your monitor:
Model NumberE1916H / E1916He E2016H
Temperature
•Operating
•Non-operating
Humidity
•Operating
•Non-operating
Altitude
•Operating
•Non-operating
Thermal dissipation58.0 BTU/hour (maximum)
0 °C to 40 °C (32 °F to 104 °F)
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
10 % to 80 % (non-condensing)
Storage: 5 % to 90 % (non-condensing)
Shipping: 5 % to 90 % (non-condensing)
5,000 m (16,404 ft) max
12,191 m (40,000 ft) max
47.8 BTU/hour (typical)
Model NumberE2216H E2316H /
E2316Hr
Temperature
•Operating
•Non-operating
Humidity
•Operating
•Non-operating
Altitude
•Operating
•Non-operating
Thermal dissipation81.9 BTU/hour
0 °C to 40 °C (32 °F to 104 °F)
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
10 % to 80 % (non-condensing)
Storage: 5 % to 90 % (non-condensing)
Shipping: 5 % to 90 % (non-condensing)
5,000 m (16,404 ft) max
12,191 m (40,000 ft) max
(maximum)
61.4 BTU/hour
(typical)
85.3 BTU/hour
(maximum)
68.3 BTU/hour
(typical)
64.83 BTU/hour (maximum)
51.18 BTU/hour (typical)
E2416H
92.1 BTU/hour
(maximum)
75.1 BTU/hour
(typical)
20 About Your Monitor
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more
pixels to become fixed in an unchanging state. The visible result is a fixed pixel that
appears as an extremely tiny dark or bright discolored spot. When the pixel remains
permanently lit, it is known as a “bright dot.” When the pixel remains black, it is known
as a “dark dot.”
In almost every case, these fixed pixels are hard to see and do not detract from display
quality or usability. A display with 1 to 5 fixed pixels is considered normal and within
competitive standards. For more information, see Dell Support site at:
http://www.dell.com/support/monitors.
Maintenance Guidelines
Caring for Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the
monitor.
CAUTION: Before cleaning the monitor, unplug the monitor power
cable from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or
handling your monitor:
• To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If
possible, use a special screen-cleaning tissue or solution suitable for the antistatic
coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed
air.
• Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of
any kind as some detergents leave a milky film on the plastics.
• If you notice a white powder when you unpack your monitor, wipe it off with a
cloth. This white powder occurs during the shipping of the monitor.
• Handle your monitor with care as a darker-colored monitor may scratch and show
white scuff marks more than a lighter-colored monitor.
• To help maintain the best image quality on your monitor, use a dynamically
changing screen saver and power off your monitor when not in use.
About Your Monitor 21
Setting Up the Monitor
Attaching the Stand
NOTE: The stand base is detached when the monitor is shipped from the factory.
1. Assemble the stand riser to stand base.
a. Place the monitor stand base on a stable table top.
b. Slide the monitor stand body in the correct direction down onto the
stand base until it clicks into place.
2. Attach the stand assembly to the monitor:
a. Place the monitor on a soft cloth or cushion near the edge of desk.
b. Align the stand assembly bracket to the monitor groove.
c. Insert the bracket towards monitor until it locks in place.
22 Setting Up the Monitor
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
To connect your monitor to the computer:
1. Turn o your computer and disconnect the power cable.
2. Connect the black VGA or DisplayPort cable to the corresponding video
port on the back of your computer. Do not use all cables at the same
time. Use the all cables only when they are connected to dierent
computers with appropriate video systems.
Connecting VGA Cable
Connecting DP cable
NOTE: The graphics are used for the purpose of illustration only. Appearance on the
computer may vary.
Setting Up the Monitor 23
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See Connecting
Your Monitor for cable attachment), organize all cables as shown above.
Removing the Monitor Stand
NOTE: This is applicable for a monitor with a stand. When any other stand is bought,
please refer to the respective stand setup guide for the removal instructions.
1. Remove the VESA Cover.
a. Place the monitor panel on a soft cloth or cushion.
b. Lift from both side simultaneously, remove the VESA Cover away from the
monitor.
24 Setting Up the Monitor
Loading...
+ 55 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.