Dell DRF37, P06T User Manual

ALIENWARE® M11x MOBILE MANUAL

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how
to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

The contents herein are subject to change without notice.

© 2009-2010 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the prior written permission of Dell Inc. is
strictly prohibited.

Trademarks used in this manual: Alienware, AlienFX, and the AlienHead logo are trademarks or registered
trademarks of Alienware Corporation.; Dell is a trademark of Dell Inc.; Microsoft and Windows are either
trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.; Intel,
Pentium, and SpeedStep are the registered trademarks and Core is a trademark of Intel Corporation in the U.S.
and other countries.; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc.; Computrace and Absolute
are registered trademarks of Absolute Software Corporation.

Other trademarks and trade names may be used in this manual to refer to either the entities claiming the marks
and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other
than its own.

Model: P06T Type: P06T001/P06T002 P/N: DRF37 Rev. A01 January 2010

CONTENTS

CHAPTER 1: SETTING UP YOUR LAPTOP ................................................9

Before Setting Up Your Laptop ....................................................10

Connect the AC Adapter...........................................................12

Press the Power Button ...........................................................13

Connect the Network Cable (Optional) .............................................14

Set Up Microsoft Windows ........................................................15

Connect to the Internet (Optional).................................................16

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP ........................................19

Left View Features ............................................................... 20

Right View Features ............................................................. 23

Back View Features ...............................................................24

Display Features..................................................................26

Computer Base and Keyboard Features ........................................... 28

Power Button ...................................................................30

Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3

CONTENTS

CHAPTER 3: USING YOUR LAPTOP.....................................................35

Alienware Command Center...................................................... 36

Using Removable Media and Cards ............................................... 39

Using the Wireless Control ....................................................... 40

Battery Pack ....................................................................40

Power Management ..............................................................41

Conguring the BIOS ............................................................ 43

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS...............................55

Before You Begin ................................................................ 56

Replacing the Battery Pack....................................................... 60

Upgrading or Replacing Memory.................................................. 63

Upgrading or Replacing the Hard Drive Assembly.................................. 65

CHAPTER 5: TROUBLESHOOTING .....................................................69

Basic Hints and Tips ..............................................................70

Backup and General Maintenance .................................................71

Software Diagnostic Tools ........................................................73

Answers to Common Problems ....................................................76

4

CONTENTS

CHAPTER 6: SYSTEM RECOVERY ..................................................... 83

Recovery Options................................................................ 84

Dell DataSafe Local Backup ...................................................... 85

CHAPTER 7: BASIC SPECIFICATIONS .................................................. 89

APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

GENERAL AND ELECTRICAL SAFETY PRECAUTIONS ................................ 96

CONTACTING ALIENWARE ........................................................ 99

5

6

Dear Valued Alienware Customer,

Welcome to the Alienware family. We are thrilled to include you among the growing number
of savvy high-performance mobile users.

e Alienware technicians who have crafted your machine have made certain that your high-

performance mobile is properly optimized and performs to its fullest potential. We build

machines with one single unwavering purpose: Build It As If It Were Your Own. e technicians

will not rest until your new machine meets or exceeds our very demanding criteria!

We have tested your machine extensively in order to ensure that you enjoy the highest levels
of performance. In addition to a standard burn-in period, your system has been evaluated
using real-world tools such as synthetic performance benchmarks.

We invite you to share your experience with your new high-performance mobile with us, so

please do not hesitate to either e-mail or call Alienware with any questions or concerns. e
entire sta shares your enthusiasm for new technology and we hope that you enjoy using

your new mobile as much as Alienware enjoyed building it for you.

Sincerely,

Alienware Sta

7

8

CHAPTER 1: SETTING UP YOUR LAPTOP

CHAPTER 1:
SETTING UP YOUR LAPTOP

CHAPTER 1: SETTING UP YOUR LAPTOP

Before Setting Up Your Laptop

Congratulations on the purchase of your Alienware® M11x!

Read all safety and setup instructions before connecting your new laptop. Begin by carefully
opening the box and removing all components that were shipped to you.

Before setting up your laptop or components, see the included invoice to verify that all items
ordered are present and be sure to inspect all items for any physical damage that may have
occurred during shipment. Report any missing components or damaged items to customer
service within 5 days of receiving the shipment. Anything reported missing or damaged after

the rst 5 days of receiving a shipment will not be honored. Some of the most common items

to check for include:

Laptop and AC adapter with power cable•
Microsoft CD-key located at the bottom of the laptop•
Monitor with power cable and video cable (if ordered)•
Keyboard (if ordered)•
Mouse (if ordered)•
Multimedia speakers and sub-woofer (if ordered)•
Joystick controllers (if ordered)•

You may also need a small athead and/or a Phillips head screwdriver for connecting peripheral

cables to the laptop.

10

CHAPTER 1: SETTING UP YOUR LAPTOP

Product Documentation and Media

e documentation that ships with your Alienware® laptop is designed to provide answers

to many of the questions that may arise as you explore your new laptop’s capabilities. You
may see the documentation for technical information or general use as needed to answer

questions in the future, or aid you in nding answers and solutions. e media included

with your laptop is referenced in some sections of the documentation and may be needed to

complete certain tasks. As always, our technical support sta is available to assist you.

Placing Your Laptop

WARNING: Do not place the laptop near or over a radiator or heating vent. If your laptop
is placed in a cabinet, ensure that adequate ventilation is provided. Do not place the
laptop in a humid location or in any area where the laptop may be exposed to rain or
water. Be careful not to spill liquid of any kind on or into the laptop.

When placing your laptop, ensure that:

It is placed on a surface that is both level and stable. •

e power and other cable connectors are not jammed between the laptop and a wall – •

or any other object.

Nothing obstructs airow in front of, behind, or below the laptop.•
e laptop has enough room so that optical drives and other external storage drives •

can be easily accessed.

11

CHAPTER 1: SETTING UP YOUR LAPTOP

Connect the AC Adapter

WARNING: e AC adapter works with electrical outlets worldwide. However, power

connectors and power strips vary among countries. Using an incompatible cable or

improperly connecting the cable to a power strip or electrical outlet may cause re or

equipment damage.

12

Press the Power Button

CHAPTER 1: SETTING UP YOUR LAPTOP

13

CHAPTER 1: SETTING UP YOUR LAPTOP

Connect the Network Cable (Optional)

14

CHAPTER 1: SETTING UP YOUR LAPTOP

Set Up Microsoft Windows

Your computer is precongured with the Microsoft® Windows® operating system. To set up
Windows for the rst time, follow the instructions on the screen. ese steps are mandatory
and may take some time to complete. e Windows setup screens will take you through

several procedures including accepting license agreements, setting preferences, and setting
up an Internet connection.

CAUTION: Do not interrupt the operating system’s setup process. Doing so may render
your computer unusable and you will need to reinstall the operating system.

NOTE: For optimal performance of your computer, it is recommended that you

download and install the latest BIOS and drivers for your computer available at

support.dell.com.

NOTE: For more information on the operating system and features, see
support.dell.com/MyNewDell.

15

CHAPTER 1: SETTING UP YOUR LAPTOP

Connect to the Internet (Optional)

Setting Up a Wired Connection

If you are using a dial-up connection, connect the telephone line to the optional •
external USB modem and to the telephone wall jack before you set up your Internet
connection.

If you are using a DSL or cable/satellite modem connection, contact your ISP or cellular •
telephone service for setup instructions.

To complete setting up your wired Internet connection, follow the instructions in “Setting Up
Your Internet Connection” on page 18.

16

CHAPTER 1: SETTING UP YOUR LAPTOP

Setting Up a Wireless Connection

NOTE: To set up your wireless router, see the documentation that shipped with your
router.

Before you can use your wireless Internet connection, you need to connect to your wireless
router.

To set up your connection to a wireless router:

Ensure that wireless is enabled on your computer.1.
Save and close any open les, and exit any open programs.2.

Click 3. Start → Control Panel

In the search box, type 4. network, and then click Network and Sharing Center→
Connect to a network.

Follow the instructions on the screen to complete the setup.5.

17

CHAPTER 1: SETTING UP YOUR LAPTOP

Setting Up Your Internet Connection

ISPs and ISP oerings vary by country. Contact your ISP for oerings available in your

country.

If you cannot connect to the Internet but have successfully connected in the past, the Internet
Service Provider (ISP) might have a service outage. Contact your ISP to check the service
status, or try connecting again later.

Have your ISP information ready. If you do not have an ISP, the Connect to the Internet wizard
can help you get one.

Save and close any open les, and exit any open programs.1.

Click 2. Start → Control Panel.

In the search box, type 3. Network, and then click Network and Sharing Center→ Set up
a new connection or Network→ Connect to the Internet.

e Connect to the Internet window appears.

NOTE: If you do not know which type of connection to select, click Help me choose or

contact your ISP.
Follow the instructions on the screen and use the setup information provided by your 4.

ISP to complete the setup.

18

CHAPTER 2: GETTING TO
KNOW YOUR LAPTOP

CHAPTER 2: GETTING TO KNOW
YOUR LAPTOP

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

21 3 4 5 6 7

9

8

is chapter provides information about your new laptop to familiarize you with its various

features, and get you up and running quickly.

Left View Features

20

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

1

2

3

4

Security cable slot — Attaches a commercially available security cable to the

computer.
NOTE: Before you buy a security cable, ensure that it works with the security cable slot

on your computer.

VGA connector — Connects to video devices, such as a monitor or projector.

USB connector with USB PowerShare — Connects to USB devices, such as a

mouse, keyboard, printer, external drive, or MP3 player.

e USB Powershare feature allows you to charge USB devices when the computer is
powered on/o or in sleep state.

NOTE: Certain USB devices may not charge when the computer is powered o or in sleep

state. In such cases, turn on the computer to charge the device.

NOTE: If you turn o your computer while charging an USB device, the device will stop

charging. To continue charging, disconnect the USB device and connect it again.

NOTE: e USB PowerShare is automatically shut o when only 10% of the total battery

life remains.

Network connector — Connects your computer to a network or broadband

device.

21

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

22

5

6

7

8

9

HDMI connector — Connects to a TV for both multi-channel digital audio and

video signals.

NOTE: For a monitor without built-in speakers, only the video signal will be read.

DisplayPort connector — Connects your computer to external monitors and

projectors with DisplayPort.

3-in-1 Media Card Reader — Provides a fast and convenient way to view and

share digital photos, music, videos, and documents.

IEEE 1394 A connector — Connects to high-speed serial multimedia devices

such as digital video cameras.

SIM Card slot — Allows you to install a Subscriber Identity Module (SIM) to browse

the Internet, check e-mail, and connect to a Virtual Private Network. To access these
features, you must be within the network of your cellular service provider.

Right View Features

1 2

3

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

1

2

3

Audio out/Headphone connectors (2) — Connect to a pair of headphones or to a

powered speaker or sound system.

Audio in/Microphone connector — Connects to a microphone or inputs signal for

use with audio programs.

USB connectors (2) — Connect to USB devices, such as a mouse, keyboard, printer,

external drive, or MP3 player.

23

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

1

Back View Features

24

1

AC adapter connector — Connects to an AC adapter to power the computer and

charge the battery.

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

25

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

1 2 3 4

Display Features

26

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

1 Microphone — Provides high quality sound for video conferencing and voice recording.

2 Camera — Built-in camera for video capture, conferencing, and chat.

3 Camera activity indicator — Indicates if the camera is on or o.

4 Display — Your display can vary based on selections you made when purchasing

your computer. For more information about displays, see the Dell Technology Guide
available on your hard drive or at support.dell.com/manuals.

27

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

2 3 4

1

Computer Base and Keyboard Features

28

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

1 Power button — Turns the computer on or o when pressed. For more information, see

“Power Button” on page 30.

2 Keyboard — e backlit keyboard provides visibility in dark environments by

illuminating all symbols on the keys.

3 Touch pad buttons (2) — Provide left- and right-click functions like those on a mouse.

4 Touch pad — Provides the functionality of a mouse to move the cursor, drag or move

selected items, and left-click by tapping the surface.

29

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

Power Button

You can program this button to perform actions like shutting down the operating system or
entering the standby mode. For details on how to program this button, see Power Options in
the Control Panel of Microsoft® Windows® operating system.

e power button is located in the center of the hinge cover. For the exact location, see

“Computer Base and Keyboard Features” on page 28.

e color of the AlienHead rim indicates the power status. e color indicating the power

status can be changed through the AlienFX® software.

30

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

On AC adapter:

Blue or custom AC-color e battery is fully charged.

Blue or custom AC-color fading into
white or custom battery-color

e computer is turned o or on and

the battery is charging.

Blue or custom AC-color fading into
black

On battery:

Amber or custom battery-color e battery is fully charged.

Amber or custom battery-color fading
into black

Blinking Amber or custom battery­color

For more details on standby and hibernate mode, see the Power Options in the Control Panel
of your Microsoft Windows operating system.

e computer is in standby mode.

e computer is in standby mode.

e battery charge is low.

31

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

Function Keys

NOTE: Depending on the conguration of the laptop you purchased, some of the function

keys may have no associated tasks.

e <Fn> key is located near the bottom-left corner of the keyboard, and is used together with
other keys to activate certain functions. Hold down the <Fn> key along with the key described

below:

F1 — Extend Desktop

Press <Fn><F1> to switch between the various external display options available

either simultaneously or separately.

F2 — Check Battery Status and Battery Charge Disable/Enable

Press <Fn><F2> to toggle between the Battery Status Meter, Battery Charge

Disable feature, and Battery Charge Enable feature.

F3 — Wireless Control - Switch wireless communications on/o

Press <Fn><F3> to enable or disable the wireless function.

F4 — Increase Display Brightness

Press <Fn><F4> to increase the brightness of the display.

32

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

F5 — Decrease Display Brightness

Press <Fn><F5> to decrease the brightness of the display.

F6 — Binary GFX

Press <Fn><F6> to enable or disable hybrid graphics mode.
e user can switch between the discrete and integrated graphic modes for

performance and power savings respectively.

F7 — Mute on/o

Press <Fn><F7> to enable or disable the mute function.

F8 — Decrease volume

Press <Fn><F8> to decrease the volume level.

F9 — Increase volume

Press <Fn><F9> to increase the volume level.

F10 — Rewind or Play previous track

Press <Fn><F10> to rewind or play previous track.

33

CHAPTER 2: GETTING TO KNOW YOUR LAPTOP

F11 — Play or Pause

Press <Fn><F11> to play or pause a track.

F12 — Fast Forward or Play next track

Press <Fn><F12> to fast forward or play the next track.

PAUSE — Alienware Command Center

Press <Fn><PAUSE> to access Alienware Command Center (for more information,
see “Alienware Command Center” on page 36).

PRT SCRN — AlienFX

Press <Fn><PRT SCRN> to enable or disable the AlienFX illumination.

AlienFX facilitates control of your computer’s lighting by creating a theme that
contains all of your lighting choices.

34

CHAPTER 3: USING YOUR LAPTOP

CHAPTER 3: USING YOUR LAPTOP

CHAPTER 3: USING YOUR LAPTOP

Alienware Command Center

e Alienware® Command Center gives you access to Alienware’s exclusive software and is a

continuously upgradable control panel. As Alienware releases new programs, they download
directly into the Command Center allowing you to build a library of system management,
optimization, and customization tools. You can access Alienware Command Center by

pressing <Fn><PAUSE>.

Connecting External Displays

If you want to enjoy your computing environment on a bigger scale visually, or extend your
desktop area, you can connect an external display such as a standalone monitor, an LCD TV,
or a projector.

Connecting a Display

Use the appropriate cable based on the connectors available on your computer and display.
Refer to the following table to identify the connectors on your computer and display.

NOTE: When connecting to a single display, connect the display to ONLY ONE of the
connectors on your computer.

36

CHAPTER 3: USING YOUR LAPTOP

Connection Type Computer Cable Display

VGA-to-VGA
(VGA cable)

HDMI-to-HDMI
(HDMI cable)

DisplayPort­to-DisplayPort
(DisplayPort cable)

DisplayPort-to-DVI
(DisplayPort-to­DVI adapter + DVI
cable)

NOTE:

You can purchase the DisplayPort-to-DVI adapter and additional HDMI or VGA

cables on the Dell website at www.dell.com.

37

CHAPTER 3: USING YOUR LAPTOP

Turn o your laptop.1.
Turn o the display and disconnect it from the power supply. 2.

Connect one end of the display cable to the DisplayPort, VGA, or HDMI connector on 3.
your Alienware laptop.

Connect the other end of the cable to the same connector on your display. 4.
If necessary, connect one end of the power cable to the display’s power connector.5.
Connect the other end of the power cable to a grounded three-prong power strip or 6.

wall outlet.
Turn on your laptop, and then turn on your display.7.

38

CHAPTER 3: USING YOUR LAPTOP

Extending the Desktop

With the external display connected, right-click on the desktop and select 1. Personalize.
Select 2. Connect to a projector or other external display in the upper left portion of the

screen.
Click 3. Connect Display.
Select from the below options that appear on the screen:4.

Duplicate my display on all displays (mirrored)•

Show dierent parts of my desktop on each display (extended)•

Show my desktop on the external display only•

Click 5. Apply to apply your changes and then click OK to exit the Display Settings control
panel.

Using Removable Media and Cards

Observe the safety measures below:

When no media card (SD/MMC/MS cards) is inserted into media card slot, ensure that the

blank cards that shipped with your laptop is inserted in the unused slot(s). e blank cards

protect the unused slots from dust and other particles. When inserting a blank card, ensure
that the correct side is on the top (indicated by an arrow mark on some blank cards). Inserting
a blank card upside down may damage your laptop.

39

CHAPTER 3: USING YOUR LAPTOP

Using the Wireless Control

e wireless control allows you to quickly turn all of your wireless radios (Bluetooth® and
WLAN) o, such as when you are asked to disable all wireless radios on an airplane ight.
Press <Fn><F3>to turn on all radios. Pressing <Fn><F3> again returns your wireless radios to
their respective states they were in before you pressed <Fn><F3> the rst time.

Battery Pack

Your laptop is equipped with a high-energy rechargeable lithium ion prismatic (Li-ion) battery

pack. Battery life will vary depending on your laptop conguration, model, applications

installed, power management settings, and features used. As with all batteries, the maximum
capacity of this battery will decrease with time and usage.

e battery meter lights on the battery pack indicate the charge level of the battery. When
you press the battery meter once, the charge level lights illuminate. Each of the ve lights
represent approximately 20% of the total battery charge. For example, if four lights turn on,
there is 80% of battery charge remaining and if no lights turn on, there is no charge remaining

in the battery.

40

CHAPTER 3: USING YOUR LAPTOP

Power Management

Understanding Power Consumption

In order to fully utilize the power of your battery, it would be a good idea for you to spend some
time acquiring a basic understanding of the power management concept from your operating
system.

You can use the power options in your operating system to congure the power settings
on your computer. e Microsoft® Windows® operating system installed on your computer

provides three default options:

Balanced — Oers full performance when you need it and saves power during periods of •

inactivity.
Power Saver — Saves power on your computer by reducing system performance to •

maximize the life of the computer and by reducing the amount of energy consumed by
your computer over its lifetime.

High Performance — Provides the highest level of system performance on your •
computer by adapting processor speed to your activity and by maximizing system
performance.

41

CHAPTER 3: USING YOUR LAPTOP

Customizing Your Power Settings

Click 1. Start → Control Panel.
Click 2. All Control Panel Items.
Double-click the 3. Power Options icon.
Select a power plan from the options shown. To customize specic settings, click 4.

Change plan settings next to the selected power plan.

Reducing Power Consumption

Although your laptop (together with the operating system) is capable of power conservation,
there are measures you can take to reduce the power consumption:

Use the AC power whenever possible.•
Lower the intensity of the display backlight. A very bright screen translates to higher •

power usage.
Enable integrated graphics to increase battery life.•

NOTE: e battery pack should be locked in the battery compartment all the time.

42

CHAPTER 3: USING YOUR LAPTOP

Conguring the BIOS

System Setup

e System Setup options allow you to:

Change the system conguration information after you add, change, or remove any •

hardware in your laptop.
Set or change a user-selectable option.•
View the installed amount of memory or set the type of hard drive installed.•

Before you use System Setup, it is recommended that you write down the current System
Setup information for future reference.

CAUTION: Do not change the settings in System Setup unless you are an expert
computer user. Certain changes can cause your computer to work incorrectly.

43

CHAPTER 3: USING YOUR LAPTOP

Entering System Setup

Turn on (or restart) your laptop.1.

NOTE: Keyboard failure may result when a key on the keyboard is held down for extended

periods of time. To avoid possible keyboard failure, press and release <F2> in even

intervals until the System Setup screen appears.
While the laptop is booting, press <F2> immediately before the operating system logo 2.

appears to access the BIOS Setup Utility.
If an error occurs during POST (Power On Self Test), you may also enter the BIOS Setup

Utility by pressing <F2> when prompted.

NOTE: If you wait too long and the operating system logo appears, continue to wait until

you see the Microsoft® Windows® desktop, then shut down your laptop and try again.

System Setup Screens

e BIOS Setup Utility window displays current or changeable conguration information for
your laptop. Information is divided into ve menus: Main, Advanced, Security, Boot, and Exit.

Key functions appear at the bottom of the BIOS Setup Utility window and lists keys and their

functions within the active eld.

44

CHAPTER 3: USING YOUR LAPTOP

System Setup Options

NOTE: Depending on your computer and installed devices, the items listed in this section
may not appear, or may not appear exactly as listed.

NOTE: For the updated system setup information, see the Service Manual at support.
dell.com/manuals.

Main Menu

System Time

System Date

Alienware

Service Tag

BIOS Version

EC Version

CPU

CPU Speed

CPU Cache

CPU ID

Displays the system time.

Displays the system date.

Displays the model number of your computer.

Displays the service tag of your computer.

Displays the BIOS revision.

Displays the EC rmware version.

Displays the type of processor.

Displays the speed of the processor.

Displays the processor cache size.

Displays the ID of the processor.

45

CHAPTER 3: USING YOUR LAPTOP

Main Menu

Total Memory

Memory Bank 0

Memory Bank 1

SATA Hard Drive

Advanced Menu

Switchable
Graphics

Summary Screen

46

Displays the total memory available in your computer.

Displays the memory size installed in DIMM 0.

Displays the memory size installed in DIMM 1.

Displays the installed SATA hard drive model.

Allows you to enable or disable switchable graphics mode.

Disabled: Integrated graphics mode is disabled and is •
not visible to the operating system. When this option is
disabled, system runs on discrete graphics mode.

Enabled: Integrated graphics mode is enabled. When this •
mode is enabled, integrated and discrete video can be

switched back and forth using <Fn><F6>.

Allows you to enable or disable the diagnostic screen during
boot.

Advanced Menu

Intel®
Virtualization
Technology

CHAPTER 3: USING YOUR LAPTOP

Allows you to enable or disable the virtualization technology.

is option species whether a Virtual Machine Monitor (VMM)

can utilize the additional hardware capabilities provided by
Intel Virtualization Technology.

Intel SpeedStep

Wired Network

Wireless Network

®

Allows you to enable or disable the Intel SpeedStep technology.
Disabling this feature may improve performance, but will
greatly reduce battery life.

Allows you to enable or disable the on-board LAN controller.

Disabled: Internal LAN is disabled and is not visible to the •
operating system.

Enabled: Internal LAN is enabled. •

Allows you to enable or disable the internal wireless device.

Disabled: e internal wireless device is disabled and is not •

visible to the operating system.

Enabled: e internal wireless device is enabled.•

47

CHAPTER 3: USING YOUR LAPTOP

Advanced Menu

Bluetooth Receiver

High Denition

Sound

USB Emulation

48

Allows you to enable or disable the internal Bluetooth device.

Disabled: e internal Bluetooth device is disabled and is •

not visible to the operating system.

Enabled: e internal Bluetooth device is enabled.•

Allows you to enable or disable the internal high denition

audio device.

Disabled: e internal audio device is disabled and is not •

visible to the operating system.

Enabled: e internal audio device is enabled.•

Allows you to enable or disable the USB emulation feature. is
feature denes how the BIOS, in the absence of a USB-aware

operating system, handles USB devices. USB emulation is
always enabled during POST (Power On Self Test).

NOTE: You cannot boot any type of USB device (oppy, hard
drive, or memory key) when this option is o.

Advanced Menu

SATA Operation

1394

OverClock

CHAPTER 3: USING YOUR LAPTOP

Allows you to congure the operating mode of the integrated

SATA hard drive controller.

ATA: SATA is congured for ATA mode.•
AHCI: SATA is congured for AHCI mode.•

Allows you to enable or disable the IEEE 1394 A connector.

Disabled: e IEEE 1394 A connector is disabled and is not •

visible to the operating system.

Enabled: e IEEE 1394 A connector is enabled.•

Allows you to enable or disable CPU bus clock Over-Clocking.

Disabled: CPU bus clock is 800 Mhz.•
Enabled: CPU bus clock is 1066 Mhz•

49

CHAPTER 3: USING YOUR LAPTOP

Security Menu

System Password
Status

Set System
Password

User Password
Status

Set User Password

Enable Password on
Boot

50

Displays if the supervisor password is clear or set.

Allows you to set the supervisor password. e supervisor

password controls access to the system setup utility.

Displays if the user password is clear or set.

Allows you to set the user password. e user password

controls access to the computer at boot.

Allows you to enable or disable password entry on boot.

Security Menu

Computrace

CHAPTER 3: USING YOUR LAPTOP

®

Allows you to activate or disable the BIOS module interface of
the optional Computrace® Service from Absolute® Software.

e Computrace agent from Absolute Software is a service

solution designed to help track assets and provide recovery

services in the event the computer is lost or stolen. e

Computrace agent communicates with the Absolute Software
Monitoring Server at programmed intervals to provide the
tracking service. By activating the service, you consent to the
transmission of information from and to your computer and the

Absolute Software Monitoring Server. e Computrace service

is purchased as an option and the Monitoring Server will enable
its agent security module through an interface provided by
the BIOS.

Deactivate: the Computrace module interface is not active.•
Disable: permanently block the Computrace module •

interface.
Activate: permit the Computrace module interface.•

51

CHAPTER 3: USING YOUR LAPTOP

Security Menu

e Absolute® Anti-eft solution is presently deactivated.

Note that the activate or deactivate options will permanently
activate or deactivate the feature and no further changes will
be allowed.

FailSafe

Asset Tag

Power Menu

A/C Adapter Rating

Allows you to enable or disable the Phoenix FailSafe™ security
software to protect, track, and manage your laptop and your

digital les if your laptop is lost or stolen.

Displays the asset tag.

Displays the AC adapter rating.

A/C Adapter
Warnings

USB Wake Support

52

Allows you to choose if the computer should display warning

messages when you use certain power adapters. e computer

displays these messages if you attempt to use a power adapter

that has too little capacity for your conguration.

Allows you to enable USB devices to wake the computer from
standby or to disable the USB wake support feature.

CHAPTER 3: USING YOUR LAPTOP

Power Menu

USB PowerShare

Boot Menu

Use the plus (+) or minus (-) keys to change the boot device priority. You can choose from:

Hard Drive•
USB Storage •
CD/DVD/BD•
Removal Devices•
Network•

Allows you to enable or disable the USB PowerShare feature on

the supported USB port in battery power mode. is feature

allows users to charge external devices using the stored battery
power through the USB PowerShare connector on the laptop,

even while the laptop is turned o.

For more information on USB PowerShare connector see “Left
View Features” on page 20.

NOTE: USB Powershare is always enabled on external AC Power
mode.

53

CHAPTER 3: USING YOUR LAPTOP

Exit Menu

Exit Saving
Changes

Exit Discarding
Changes

Load Setup
Defaults

Discard Changes

Save Changes

54

Allows you to exit System Setup and save your changes to
CMOS.

Allows you to exit utility without saving Setup data to CMOS.

Allows you to load default values for all Setup items.

Allows you to load previous values from CMOS for all Setup
items.

Allows you to save Setup data to CMOS.

CHAPTER 4: INSTALLING AND
REPLACING COMPONENTS

CHAPTER 4: INSTALLING AND
REPLACING COMPONENTS

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

is chapter provides guidelines and instructions for increasing the processing power and

storage space, by upgrading equipment. You can purchase components for your computer at

www.dell.com or www.alienware.com.

NOTE: See the Service Manual at support.dell.com/manuals for installation instructions

of all serviceable components. Parts purchased from Dell and Alienware will ship with

specic replacement instructions.

Before You Begin

is section provides procedures for removing and installing the components in your laptop.

Unless otherwise noted, each procedure assumes that the following conditions exist:

You have performed the steps in “Turning O Your Computer” and “Before Working •

Inside Your Computer” in this section.
You have read the safety information that shipped with your computer.•
A component can be replaced or—if purchased separately—installed by performing the •

removal procedure in reverse order.

e procedures in this section may require the following tools:

Small at-blade screwdriver•
Phillips screwdriver•

56

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open les and exit all open programs
before you turn o your laptop.

Save and close all open les and exit all open programs. 1.

Click 2. Start → Shut Down.

e laptop turns o after the operating system shutdown process nishes.
Ensure that the computer and any attached devices are turned o. If your computer 3.

and attached devices did not automatically turn o when you shut down your operating
system, press and hold the power button for at least 8 to 10 seconds until the computer
turns o.

57

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential damage and
to help to ensure your own personal safety.

WARNING: Before working inside your laptop, read the safety information that
shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Handle components and cards with care. Do not touch the components or
contacts on a card. Hold a card by its edges. Hold a component such as a processor by
its edges, not by its pins.

CAUTION: Only a certied service technician should perform repairs on your computer.

Damage due to servicing that is not authorized by Dell is not covered by your
warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding
strap or by periodically touching an unpainted metal surface (such as a connector on
the back of the computer).

CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on
the cable itself. Some cables have connectors with locking tabs; if you are disconnecting
this type of cable, press in on the locking tabs before you disconnect the cable. As you
pull connectors apart, keep them evenly aligned to avoid bending any connector pins.
Also, before you connect a cable, ensure that both connectors are correctly oriented
and aligned.

58

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

CAUTION: To avoid damaging the computer, perform the following steps before you
begin working inside the computer.

Ensure that the work surface is at and clean to prevent the computer cover from being 1.
scratched.

Turn o your computer (for more information, see “Turning O Your Computer” on 2.
page 57).

CAUTION: To disconnect a network cable, rst unplug the cable from your computer

and then unplug the cable from the network device.

Disconnect all telephone or network cables from the laptop. 3.
Press and eject any installed cards from the Media Card slot. 4.
Disconnect your computer and all attached devices from their electrical outlets.5.

CAUTION: To help prevent damage to the system board, you must remove the battery
from the battery bay before you service the laptop.

Remove the battery from the battery bay (for more information, see “Replacing the 6.
Battery Pack” on page 60).

Press the power button to ground the system board.7.

59

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

Replacing the Battery Pack

is battery pack can easily be removed and replaced. Ensure that the laptop is properly shut

down before changing the battery pack.

CAUTION: To avoid damage to the laptop, use only the battery designed for this
particular Alienware laptop. Do not use batteries designed for other Alienware or Dell
laptops.

To remove the battery pack:

Follow the instruction in “Before You Begin” on page 1. 56.
Shut down the laptop.2.
Turn the laptop over.3.
Loosen the eight captive screws and remove the compartment door.4.

60

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

2

1

1 captive screws (8) 2 compartment door

Loosen the two captive screws that secure the battery pack to the computer base.5.
Disconnect the battery pack cable from the connector on the system board.6.
Lift and slide the battery pack out of the computer.7.

61

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

1

2

3

1 battery pack 3 battery pack cable

2 captive screws (2)

To replace the battery pack, perform the removal steps in reverse order.

62

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

Upgrading or Replacing Memory

Your laptop is equipped with a congurable memory unit. e industry standard JEDEC
PC3-8500/PC3-10600 (DDR3) SODIMM memory module connectors are available for memory
upgrade. e table below illustrates all the possible ways system memory can be congured.

Memory connector #1 Memory connector #2 Total Memory

1 GB 1 GB 2 GB

2 GB 2 GB 4 GB

4 GB 4 GB 8 GB

Removing the Memory Module(s)

Follow the instructions in “Before You Begin” on page 1. 56.

Remove the battery (see “Replacing the Battery Pack” on page 2. 60).
Use your ngertips to carefully spread apart the memory module connector’s spring-3.

locks until the module pops up.
Remove the memory module.4.

63

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

5

4

3

2

1

1 memory module 4 notch

2 spring locks (2) 5 memory module connector

3 tab

To replace the memory modules, perform the removal steps in reverse order. While inserting
the memory module into the connector align the notch on the memory module with the tab
on the memory module connector.

64

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

NOTE: If you need to install memory modules in two connectors, install a memory module
in the lower connector before you install a memory module in the upper connector.

NOTE: If the memory module is not installed properly, the computer may not boot.

Upgrading or Replacing the Hard Drive Assembly

Your laptop is equipped with one hard drive socket.

Removing the Hard Drive

Follow the instructions in “Before You Begin” on page 1. 56.
Remove the battery (see “Replacing the Battery Pack” on page 2. 60).
Loosen the two captive screws on the hard drive assembly.3.
Using the black pull-tab, slide and lift the hard drive assembly to disconnect it from the 4.

system board connector.

65

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

2

1

1 pull-tab 2 hard drive

Remove the four screws that secure the hard drive to the hard drive bracket.5.
Lift the hard drive bracket of the hard drive according to the illustration.6.

66

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

3

2

1

1 hard drive bracket 3 hard drive

2 screws (4)

67

CHAPTER 4: INSTALLING AND REPLACING COMPONENTS

1

2

Remove the interposer from the hard drive.7.

1 hard drive 2 interposer

To replace the hard drive, perform the removal steps in reverse order.

68

CHAPTER 5: TROUBLESHOOTING

CHAPTER 5: TROUBLESHOOTING

CHAPTER 5: TROUBLESHOOTING

Basic Hints and Tips

Computer does not power on: Is your AC adapter cable securely connected to a working •
electrical outlet? If connected to a power strip, ensure that the strip is actually working.

Connections: Check all the cables to ensure that there are no loose connections •
anywhere.

Power Savings: Ensure that your computer is not in hibernate or standby mode by •

pressing the power button for less than 4 seconds. e power status light will fade from
blue to black while in standby mode; in hibernate mode it will be o.

Brightness: Check and adjust the brightness of the display by pressing the key •
combinations <Fn><F4> or <Fn><F5>.

Display Choice: Press the key combination <Fn><F1> to ensure that the computer is not •

set to “External Only” display.
Use only the AC adapter that shipped with your laptop.•

70

CHAPTER 5: TROUBLESHOOTING

Backup and General Maintenance

Always backup your important data on a regular basis and keep copies of your operating •
system and software safe. Do not forget to note the serial numbers if you are storing
them outside of their original cases - e.g., in a CD wallet.

Run maintenance programs as often as you can. You may schedule these programs to •
run at times when you are not using your computer. You can use those provided with
your operating system, or buy more powerful, dedicated programs to do so.

Write down your passwords and keep them safe (away from your computer). is is •

especially important if you choose to password-protect your computer’s BIOS and
operating system.

Document vital settings such as network, dialup, mail and Internet settings.•

71

CHAPTER 5: TROUBLESHOOTING

When troubleshooting your computer, remember the following safety guidelines:

Before touching any of the computer’s internal components, touch an unpainted •
portion of the chassis. Doing so will safely discharge any static electricity, which could
damage your computer.

Turn o your computer and any connected peripherals. •
Disconnect any peripherals from your computer. •

ings to check:

Ensure that the AC adapter cable is properly connected between your computer and a •
grounded, three-prong power outlet. Ensure that the power outlet is working.

Ensure the UPS or power strip is turned on (if applicable). •
If your peripheral devices (e.g. keyboard, mouse, printer, etc.) are not working, ensure •

that all connections are secure.
If any computer components were added or removed before the problem began, check •

to see if you performed the installation or removal procedures properly.
If an error message appears on the screen, write down the exact error message prior to •

calling Alienware Technical Support to aid in diagnosing and resolving your issue.

If an error occurs in a specic program, see the program’s documentation. •

72

CHAPTER 5: TROUBLESHOOTING

Software Diagnostic Tools

Pre-Boot System Assessment (PSA)

e computer runs the Pre-boot System Assessment (PSA), a series of initial tests of your

system board, keyboard, display, memory, hard drive, etc.

To invoke PSA:

Turn on (or restart) your computer.1.
Shut down and restart the laptop. When the Alienware logo appears, press <F12> 2.

immediately.

NOTE: If you wait too long and the operating system logo appears, continue to wait
until you see the Microsoft® Windows® desktop; then, shut down your computer and
try again.

Select 3. Diagnostics from the menu and press <Enter>.

During the assessment, answer any questions that appear.

If a failure is detected, the computer stops and beeps. To stop the assessment and •

restart the computer, press <n>; to continue to the next test, press <y>; to retest the
component that failed, press <r>.

If failures are detected during the Pre-boot System Assessment, write down the error •
code(s) and contact Alienware (for more information, see “CONTACTING ALIENWARE“ on
page 99).

73

CHAPTER 5: TROUBLESHOOTING

If the Pre-boot System Assessment completes successfully, the following message appears
“Do you want to run the remaining memory tests? This will take about
30 minutes or more. Do you want to continue? (Recommended).”

If you are experiencing memory issues, press <y> else press <n>. e following message is

displayed: “Pre-boot System Assessment complete.”

Press <o> to reboot your computer.

Alienware® Diagnostics

NOTE: Download Dell Drivers and Utilities from My DELL Downloads
(downloadstore.dell.com/media) and create your own backup media.

If you experience a problem with your Alienware laptop, run the Alienware Diagnostics before
you contact Alienware for technical assistance. It is recommended that you print these
procedures before you begin.

NOTE: Back up all data before initiating a system recovery.

Review your laptop’s conguration information, and ensure that the device that you want to

test displays in the system setup program and is active. Start the Alienware Diagnostics from
the backup disc.

74

CHAPTER 5: TROUBLESHOOTING

Starting Alienware Diagnostics

NOTE: Your computer does not have an internal optical drive. Use an external optical
drive or any external storage device for the procedures that involve discs.

Insert the drivers and utilities backup disc that you created. 1.
Shut down and restart the laptop. 2.

When the Alienware logo appears, press <F12> immediately.

NOTE: If you wait too long and the operating system logo appears, continue to wait
until you see the Microsoft® Windows® desktop; then, shut down your computer and
try again.

NOTE: e next steps change the boot sequence for one time only. On the next start-up,
the computer boots according to the devices specied in the system setup program.

When the boot device list appears, highlight 3. CD/DVD/CD-RW and press <Enter>.
Select 4. Boot from CD-ROM from the menu that appears and press <Enter>.
Select 5. Alienware Diagnostics from the numbered list. If multiple versions are listed,

select the version appropriate for your computer.
When the Alienware Diagnostics 6. Main Menu appears, select the test you want to run.

NOTE: Write down any error codes and problem descriptions exactly as they appear and
follow the instructions on the screen.

75

CHAPTER 5: TROUBLESHOOTING

After all tests have completed, close the test window to return to the Alienware 7.
Diagnostics Main Menu.

Remove the backup disc, then close the 8. Main Menu window to exit the Alienware
Diagnostics and restart the computer.

Answers to Common Problems

System

e computer fails the POST

e POST (Power On Self Test) tests the computer, ensuring that it meets the necessary

system requirements and that all hardware is working properly before starting the remainder
of the boot process. If the computer passes the POST, the computer will continue to start
normally. However, if the computer fails the POST, the computer will generate a single beep
to indicate a general failure and an error message will be displayed. For assistance, contact
Alienware Technical Support (see “CONTACTING ALIENWARE“ on page 99).

76

CHAPTER 5: TROUBLESHOOTING

e computer stops responding or a solid blue screen appears

CAUTION: You might lose data if you are unable to perform an operating system
shutdown.

If you are unable to get a response by pressing a key on your keyboard or moving your mouse,

press and hold the power button for at least 6 seconds until the computer turns o, then

restart your computer.

NOTE: e chkdsk program may run when you restart the computer. Follow the

instructions on the screen.

A program stops responding or crashes repeatedly

End the program:

Press <Ctrl><Shift><Esc> simultaneously. 1.
Click the 2. Applications tab and select the program that is no longer responding.
Click 3. End Task.

Check the software documentation.

If necessary, uninstall and then reinstall the program.

77

CHAPTER 5: TROUBLESHOOTING

A program is designed for an earlier version of Microsoft® Windows®

Run the Program Compatibility Wizard:

e Program Compatibility Wizard congures a program so that it runs in an environment

similar to an earlier version of Microsoft Windows operating system environments.

Click 1. Start → Control Panel→ Programs→ Programs and Features→ Use an older
program with this version of Windows.

In the welcome screen, click 2. Next.
Follow the instructions on the screen.

Other software problems

Back up your les immediately

Use a virus-scanning program to check the hard drive, or CDs

Save and close any open les or programs and shut down your computer through the Start

menu

78

CHAPTER 5: TROUBLESHOOTING

Scan the computer for spyware:

If you are experiencing slow computer performance, you frequently receive pop-up
advertisements, or you are having problems connecting to the Internet, your computer might
be infected with spyware. Use an anti-virus program that includes anti-spyware protection
(your program may require an upgrade) to scan the computer and remove spyware.

Run the PSA Diagnostics:

If all tests run successfully, the error condition is related to a software problem.

Check the software documentation or contact the software manufacturer for
troubleshooting information:

Ensure that the program is compatible with the operating system installed on your •
computer.

Ensure that your computer meets the minimum hardware requirements needed to run •
the software. See the software documentation for information.

Ensure that the program is installed and congured properly.•
Verify that the device drivers do not conict with the program.•
If necessary, uninstall and then reinstall the program.•

79

CHAPTER 5: TROUBLESHOOTING

Hard Drive Problems

Allow the computer to cool before turning it on

A hot hard drive may prevent the operating system from starting. Try allowing the computer
to return to room temperature before turning it on.

Run Check Disk

Click 1. Start → Computer.
Right-click 2. Local Disk C:.
Click 3. Properties→ Tools→ Check Now.

If the User Account Control window appears, click Continue.

Follow the instructions on the screen.

80

CHAPTER 5: TROUBLESHOOTING

Memory

Memory errors detected on startup

Check memory modules for correct seating and orientation. Reseat the memory •
modules if applicable (see “Upgrading or Replacing Memory” on page 63).

Computers using a dual-channel memory conguration require that memory modules •

be installed in pairs. If you require assistance, contact Alienware Technical Support (for
more information, see “CONTACTING ALIENWARE“ on page 99).

Display

If the display is blank

NOTE: If you are using a program that requires a higher resolution than your computer
supports, it is recommended that you attach an external monitor to your computer.

e computer may be in a power saving mode:

Press a key on the keyboard or press the power button to resume normal operation.

Switch the video image:

If your computer is attached to an external monitor, press <Fn><F1> to switch the video image

to the display.

81

CHAPTER 5: TROUBLESHOOTING

Power

When you press the power button, the computer does not turn on

If the AC adapter cable is connected to a surge protector or UPS, ensure that the surge •
protector or UPS is securely connected to an electrical outlet, is switched on and is
working correctly.

Check that the wall outlet is working properly by testing another device such as a radio •
or lamp that you know works. If the wall outlet is not working, contact an electrician or
your power company for further assistance.

If the problem persists, contact Alienware support (see “CONTACTING ALIENWARE“ on
page 99).

82

CHAPTER 6: SYSTEM RECOVERY

CHAPTER 6: SYSTEM RECOVERY

CHAPTER 6: SYSTEM RECOVERY

Recovery Options

Your computer has the following system recovery options:

Operating System Reinstallation Disc• — Contains operating system installation media.

Dell DataSafe Local• — Your computer is pre-installed with Dell DataSafe Local (see “Dell

DataSafe Local Backup” on page 85).

Dell DataSafe Online • — Dell DataSafe Online is an online data backup service (see “Dell
DataSafe Online Backup” on page 87).

System Drivers• — You can download the latest drivers for your computer from
support.dell.com.

System Applications• — Some of the software that is pre-installed on your computer

does not include a backup CD/DVD. is software is available at My Dell Downloads
(downloadstore.dell.com/media).

NOTE: My Dell Downloads may not be available in all regions.

84

CHAPTER 6: SYSTEM RECOVERY

Dell DataSafe Local Backup

Dell DataSafe Local Backup is a backup and recovery application that can restore your

computer if you lose data due to a virus attack, accidentally delete critical les or folders, or if

the hard drive crashes.

is application allows you to:

Restore les and folders•
Restore your hard drive to the operating state it was in when you purchased your •

computer, without erasing the existing personal les and data

To schedule backups:

Double-click the Dell DataSafe Local Backup icon 1. on the taskbar.
Choose 2. Full System Backup to create and schedule automatic backup of all the data in

your computer.

85

CHAPTER 6: SYSTEM RECOVERY

To restore data:

Turn o your computer.1.
Disconnect all the devices connected to the computer (such as USB drive, printer, etc.) 2.

and remove any recently added internal hardware.

NOTE: Do not disconnect the monitor, keyboard, mouse, and the power cable.
Turn on your computer.3.

When the Alienware logo appears, press <F8> several times to access the 4. Advanced
Boot Options window.

NOTE: If you wait too long and the operating system logo appears, continue to wait

until you see the Microsoft® Windows® desktop; then, shut down your computer and try
again.

Select 5. Repair Your Computer.
Select 6. Dell Factory Image Recovery and DataSafe Options and follow the instructions

on the screen.

NOTE: e restoration process might take an hour or more depending on the size of the

data to be restored.

NOTE: For more information on Dell DataSafe Local Backup, see knowledge base article

353560 at support.dell.com.

86

CHAPTER 6: SYSTEM RECOVERY

Dell DataSafe Online Backup

NOTE: Dell DataSafe Online Backup may not be available in all regions.

NOTE: A broadband connection is recommended for fast upload/download speeds.

Dell DataSafe Online is an automated backup and recovery service that helps protect your

data and other important les from catastrophic incidents like theft, re, or natural disasters.

You can access the service on your computer using a password-protected account.

For more information, go to delldatasafe.com.

To schedule backups:

Double-click the Dell DataSafe Online icon 1.
Follow the instructions that appear on the screen. 2.

on the taskbar.

87

CHAPTER 6: SYSTEM RECOVERY

88

CHAPTER 7: BASIC SPECIFICATIONS

CHAPTER 7: BASIC SPECIFICATIONS

CHAPTER 7: BASIC SPECIFICATIONS

is chapter provides the basic specications of your computer. For more detailed
specications, see the

Computer Model

Alienware M11x

Dimensions

Height (Front and Back) 32.7 mm (1.29 inches)

Width 285.7 mm (11.25 inches)

Depth 233.3 mm (9.19 inches)

Weight with 8-cell battery
(starting at)

Processor and System Chipset

Processor Intel Pentium™ Dual Core

System chipset Intel GS45

Comprehensive Specications

1.99 kg (4.39 lb)

NOTE: e weight of your laptop will vary depending
on the conguration ordered and the manufacturing

variability.

Intel® Core™ 2 Duo

at support.dell.com/manuals.

90

CHAPTER 7: BASIC SPECIFICATIONS

Memory

Connectors two internally-accessible DDR3 SODIMM sockets

Capacities 1 GB, 2 GB, and 4 GB

Memory type 1066 MHz (dual channel congurations)

Memory congurations

possible

Ports and Connectors

IEEE 1394 A one 4-pin serial connector

Network adapter one RJ45 connector 10/100 Mbps

USB three 4-pin USB 2.0-compliant connectors, including

VGA one 15-hole connector

HDMI one 19-pin connector

DisplayPort one 20-pin connector

Audio one microphone connector,

2 GB, 4 GB, and 8 GB

one USB Powershare connector

two stereo headphone/speaker connectors

91

CHAPTER 7: BASIC SPECIFICATIONS

Ports and Connectors

3-in-1 Media Card Reader one combo connector

SIM card one SIM card slot

AC Adapter

Type 65 W

Output current 3.34 A

Rated output voltage 19.5 VDC

Communications

Network adapter 10/100 Mbps Ethernet LAN on system board

Wireless WLAN Mini-Card (half Mini-Card slot)•

WWAN Mini-Card (full Mini-Card slot) (optional)•
integrated Bluetooth•

®

module (optional)

Drives/Cards Supported

Hard drive 2.5 inch SATA hard drive

92

CHAPTER 7: BASIC SPECIFICATIONS

Drives/Cards Supported

Media Card Reader types Secure Digital (SD) memory card•

Multi Media Card (MMC)•
Memory Stick PRO•

Video cards Intel Graphics Media Accelerator 4500MHD •

(Integrated on system board)
Nvidia GeForce GT 335M (Discrete)•

Display

Type (WLED) 11.6 inch HD+ (1366 x 768) TrueLife

Keyboard (Backlit)

Layouts U.S. and Canada; Europe; Japan

Camera

Pixel 1.3 megapixel

93

CHAPTER 7: BASIC SPECIFICATIONS

Battery

Type and dimensions

8-cell “smart” lithium ion (63 Whr)

Depth 109.4 mm (4.31 inches)

Height 11.2 mm (0.44 inches)

Width 173 mm (6.81 inches)

Weight 0.43 kg (0.94 lb)

Voltage 14.8 V

Operating time Battery operating time varies depending on operating

conditions and can be signicantly reduced under

certain power-intensive conditions.

Life span (approximate) 300 discharge/charge cycles

Temperature range

Operating 0° to 50°C (32° to 122°F)

Storage –20° to 60°C (–4° to 140°F)

Coin-cell battery CR-2032

94

APPENDIX

APPENDIX

APPENDIX

GENERAL AND ELECTRICAL SAFETY PRECAUTIONS

Computer Setup

Read all instructions marked on the product and in the documentation before operating •
your computer.

Retain all safety and operating instructions.•
Never use this product near water or a heat source.•
Only set-up the computer on a stable work surface.•
Only operate the computer using the power source type indicated on the rating label.•

Never block or cover any openings or fans in the computer case. ese are required for •

ventilation.
Never insert objects of any kind into the ventilation openings.•
Ensure that your computer is properly grounded when in use.•
Do not attempt to connect your computer into an outlet that is not properly grounded.•
If an extension cord is used with your computer, ensure that the total ampere rating on •

the computer does not exceed the maximum rating on the extension cord.

96

APPENDIX

Computer Use

Route the power cable and all cables away from where people might walk or trip over •
them. Do not allow anything to rest on the power cable.

Do not spill anything on or into your computer. •
To avoid electrical shock, always disconnect all power, modem and any other cables •

from the wall outlets before handling the computer.

Electrostatic Discharge (ESD) Warning

Electrostatic Discharge (ESD) can cause damage to internal system components if
precautions are not taken. ESD is caused by static electricity and the damage caused is usually
permanent.

Computer technicians wear a special wrist-strap that grounds them to the computer’s case to
prevent ESD damage. You can reduce the chances of ESD damage by doing the following:

Turn o your computer’s power and wait several minutes before starting to work. •

Ground yourself by touching the case of the computer. •
Avoid walking around while replacing items inside the case, especially if you are on a •

carpet or during low temperature and low humidity.
Touch only those items which must be replaced. •

97

APPENDIX

If you have to remove peripheral cards for any reason, place them on the portion of the •
computer’s case that was removed. Do not touch the edge connectors at the bottom of
the card that connect to the system board.

General Safety Precautions

Mechanical Shock: Your computer should never be subjected to severe mechanical •
shocks. Careless handling of your computer may cause damage. Mechanical Shock is
not covered by the warranty.

Electrical Shock: If you do not open up your computer, there is nothing to worry about. •
Your computer protects itself against most irregularities in the power source.

When You Should Contact Alienware

e battery, power cable or connector is damaged. •

Your computer has had liquid spilled into it. •
Your computer was dropped or the case was damaged. •
Normal operation of the computer does not occur when the operating instructions are •

followed.

Replacement Components or Accessories

It is only advised to use replacement parts or accessories recommended by Alienware.

98

APPENDIX

CONTACTING ALIENWARE

NOTE: If you do not have an active Internet connection, you can nd contact information

on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Because
availability varies by country and product, some services may not be available in your area.

To contact Dell for sales, technical support, or customer service issues:

Visit 1. www.dell.com/contactdell.
Select your country or region.2.
Select the appropriate service or support link based on your need.3.
Choose the method of contacting Dell that is convenient for you.4.

99

APPENDIX

Websites

You can learn about Alienware products and services on the following websites:

www.dell.com•
www.dell.com/ap• (Asian/Pacic countries only)
www.dell.com/jp• (Japan only)
www.euro.dell.com• (Europe only)
www.dell.com/la• (Latin American and Caribbean countries)
www.dell.ca• (Canada only)

You can access Alienware Support through the following websites:

support.dell.com•
support.jp.dell.com• (Japan only)
support.euro.dell.com• (Europe only)
support.la.dell.com• (Argentina, Brazil, Chile, Mexico)

100