Dell DPE750 User Manual
Dell™ PowerEdge™ 750
Adapter Installation Guide
This adapter allows you to connect your WebReboot to the
Dell™ PowerEdge™ 750 server, which does not contain
standard power switch pins.
Part #: DPE750
WebReboot™
Dell™ PowerEdge™ 750 Adapter
Installation Guide
Copyright 2006. Servprise International, Inc. All rights reserved.
Dell™, PowerEdge™, and Dell PowerEdge™ are trademarks of
Dell Inc.
Product Description 1
Product Description
The Dell™ PowerEdge™ 750 Adapter allows you to connect your
servers that don’t contain power pins to the WebReboot. The
adapter connects to the server’s front panel board, and provides a
connection for power switch pins.
2 Product Description
Customer Service
Online:
Additional information that may not be included in this guide
can be found at http://www.servprise.com. Questions may be
emailed to support@servprise.com.
This connector is known to work with the following Dell
PowerEdge™ servers:
• PowerEdge 750
Caution: By installing and/or using the Dell™ PowerEdge™ 750 Adapter,
you are accepting all risk of damage to yourself, your equipment, your data,
and the WebReboot, and releasing Servprise International, Inc. and all of its
personnel, agents, and officers of any and all liability. Failure to abide by
static-safe practices and the maintenance instructions associated with your
equipment significantly increases the chance of damage to your equipment.
Check with your computer manufacturer before connecting the Dell™
PowerEdge™ 750 Adapter to your equipment to ensure you will not void
the warranty on your equipment. Servprise International highly recommends
having a trained computer repair technician perform all maintenance and
upgrade work on computer equipment.
Telephone:
1-800-832-3823 – United States
1-401-741-3295 – International
Mail:
Servprise International, Inc.
447 Rawson Street
Leicester, MA 01524
USA
Installation 3
Installation Preparation
1. Before proceeding with the installation, ground yourself with a
suitable anti-static wrist strap to reduce the risk of damage to
your equipment.
2. Open your server’s chassis by following the maintenance
instructions that came with your equipment.
3. You must first decide which type of WebReboot installation you
would like to make with each server. Two options are available:
• Installation using a PCI slot
• Installation without using a PCI slot
An overview of each type of installation is provided on the
following two pages.
4 Installation
Option 1 - Installation Using a PCI Slot (Recommended)
Servprise recommends using the External PCI Slot Cover
Adapter to enable quick and easy connections at the rear of the
server for the WebReboot. Of course, the drawback to this
installation is that it requires an available PCI slot. To use this
installation type, please continue to Installation With PCI Slot
on page 6.
Figure 1 – Installation Using a PCI Slot (Recommended)
Loading...