Statement of Volatility – Dell Mono Laser Printers
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
Dell Mono Laser printers contain both volatile and non-volatile (NV) components. Volatile components lose their data
immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even
after power is removed from the component. The following NV components are present on the system board.
Table 1. List of Non-Volatile Components on System Board
Firmware,
Usage,
Statistics,
Configuration
Base Memory 128 MB DDR3 SDRAM V No
128 MB
(code store)
NAND NV Yes
Memory
Cartridge 8 Kb FRAM NV No
Fuser N/A N/A N/A N/A
Firmware,
Usage,
Statistics,
Configuration
Base Memory 256 MB DDR3 SDRAM V No
Memory
Cartridge 8 Kb FRAM NV No
Fuser N/A N/A N/A N/A
N/A DDR3 SDRAM V No
128 MB
(code store)
N/A DDR3 SDRAM V No
NAND NV Yes
November 2012
Firmware,
Usage,
Statistics,
Configuration
Base Memory 256 MB DDR3 SDRAM V No
128 MB
(code store)
NAND NV Yes
Memory
Cartridge 8 Kb FRAM NV No
Fuser N/A N/A N/A N/A
Firmware,
Usage,
Statistics,
Configuration
Base Memory 1 GB DDR3 SDRAM V No
Memory
Cartridge 8 Kb FRAM NV No
Fuser N/A N/A N/A N/A
512 MB & 1 GB DDR3 SDRAM V No
up to 1 GB
(code store)
1 GB & 2 GB DDR3 SDRAM V No
eMMC NV Yes
Firmware,
Usage,
Statistics,
Configuration
Base Memory 512 MB DDR3 SDRAM V No
Memory
Cartridge 8 Kb FRAM NV No
Fuser 8 Kb FRAM NV No
128 MB
(code store)
1 GB & 2 GB DDR3 SDRAM V No
NAND NV Yes