Dell 260, 260S User Manual 3

Dell Vostro 260/260s Mini-Tower Owner's Manual
Regulatory Model D11M Regulatory Type D11M001

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Information in this publication is subject to change without notice. © 2011 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Latitude™, Latitude ON™, OptiPlex™, Vostro™, and Wi-Fi Catcher™ are trademarks of Dell Inc. Intel®, Pentium®, Xeon®, Core™, Atom™, Centrino®, and Celeron® are registered trademarks or trademarks of Intel Corporation in the U.S. and other countries. AMD® is a registered trademark and AMD Opteron™, AMD Phenom™, AMD Sempron™, AMD Athlon™, ATI Radeon™, and ATI FirePro™ are trademarks of Advanced Micro Devices, Inc. Microsoft®, Windows®, MS-DOS®, Windows Vista®, the Windows Vista start button, and Office Outlook United States and/or other countries. (BDA) and licensed for use on discs and players. The owned by the registered trademark of Wireless Ethernet Compatibility Alliance, Inc.
Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products, Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Bluetooth
Dell™, the DELL logo, Dell Precision™, Precision ON™,ExpressCharge™,
®
are either trademarks or registered trademarks of Microsoft Corporation in the
®
SIG, Inc. and any use of such mark by Dell Inc. is under license.
Blu-ray Disc
is a trademark owned by the Blu-ray Disc Association
Bluetooth
®
word mark is a registered trademark and
Wi-Fi
®
is a
2011 — 08
Rev. A00

Contents

Notes, Cautions, and Warnings..................................................................2
1 Working on Your Computer......................................................................7
Before Working Inside Your Computer.............................................................................7
Recommended Tools.........................................................................................................8
Turning Off Your Computer................................................................................................8
After Working Inside Your Computer................................................................................9
2 Cover..........................................................................................................11
Removing The Cover.......................................................................................................11
Installing The Cover.........................................................................................................12
3 Front Bezel.................................................................................................13
Removing The Front Bezel...............................................................................................13
Installing The Front Bezel................................................................................................14
4 Expansion Card.........................................................................................15
Removing The Expansion Cards......................................................................................15
Installing The Expansion Card.........................................................................................16
5 Fan..............................................................................................................17
Removing The Fan...........................................................................................................17
Installing The Fan............................................................................................................18
6 Memory......................................................................................................19
Removing The Memory...................................................................................................19
Installing The Memory.....................................................................................................20
7 Optical Drive..............................................................................................21
Removing The Optical Drive............................................................................................21
Installing The Optical Drive.............................................................................................22
8 Hard Drive..................................................................................................23
Removing The Hard Drive................................................................................................23
Installing The Hard Drive.................................................................................................24
9 Wireless Local Area Network (WLAN) Card.......................................25
Removing The WLAN Card..............................................................................................25
Installing The WLAN Card...............................................................................................26
10 Multimedia-Card Reader.......................................................................27
Removing The Multimedia-Card Reader.........................................................................27
Installing The Multimedia-Card Reader..........................................................................28
11 Power Supply..........................................................................................29
Removing The Power Supply..........................................................................................29
Installing The Power Supply...........................................................................................30
12 Power-Switch Cable..............................................................................31
Removing The Power Switch Cable................................................................................31
Installing The Power Switch Cable.................................................................................32
13 Input/Output Panel.................................................................................33
Removing The I/O Panel..................................................................................................33
Installing The I/O Panel...................................................................................................34
14 Processor................................................................................................35
Removing The Processor................................................................................................35
Installing The Processor.................................................................................................37
15 Coin-Cell Battery....................................................................................39
Removing The Coin-Cell Battery.....................................................................................39
Installing The Coin-Cell Battery.......................................................................................40
16 System Board..........................................................................................41
Removing The System Board..........................................................................................41
Installing The System Board...........................................................................................43
17 Specifications.........................................................................................45
Specifications..................................................................................................................45
18 Troubleshooting......................................................................................51
Diagnostic Power LED Codes..........................................................................................51
Diagnostic Beep Codes...................................................................................................52
Diagnostic Error Messages.............................................................................................53
System Error Messages..................................................................................................58
19 System Setup..........................................................................................61
System Setup Overview..................................................................................................61
Enter System Setup.........................................................................................................61
System Setup Screens....................................................................................................61
System Setup Option.......................................................................................................63
20 Contacting Dell.......................................................................................67
Contacting Dell................................................................................................................67
6

Working on Your Computer 1

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist:
You have read the safety information that shipped with your computer.
A component can be replaced or--if purchased separately--installed by performing the removal procedure in reverse order.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your computer and certain components may appear differently than shown in this document.
7
To avoid damaging your computer, perform the following steps before you begin working inside the computer.
1. Ensure that your work surface is flat and clean to prevent the computer
cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer).
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.
3. Disconnect all network cables from the computer.
4. Disconnect your computer and all attached devices from their electrical
outlets.
5. Press and hold the power button while the computer is unplugged to
ground the system board.
6. Remove the cover.
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components.

Recommended Tools

The procedures in this document may require the following tools:
Small flat-blade screwdriver
Phillips screwdriver
Small plastic scribe
Flash BIOS update program media

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.
1. Shut down the operating system:
In Windows 7:
Click Start , then click Shut Down.
In Windows Vista:
8
Click Start , then click the arrow in the lower-right corner of the Start menu as shown below, and then click Shut Down.
In Windows XP: Click Start Turn Off ComputerTurn Off . The computer turns off
after the operating system shutdown process is complete.
2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for about 6 seconds to turn them off.

After Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer.
1. Replace the cover.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
2. Connect any telephone or network cables to your computer.
3. Connect your computer and all attached devices to their electrical outlets.
4. Turn on your computer.
5. Verify that the computer works correctly by running the Dell Diagnostics.
9
10

Cover 2

Removing The Cover

1. Follow the procedures in
2. Remove the screws that secure the cover to the computer.
3. Slide the computer cover towards the back of the computer.
Before Working Inside Your Computer
.
4. Remove the computer cover.
11

Installing The Cover

1. Place the cover on the chassis.
2. Slide the computer cover towards the front of the computer.
3. Replace the screws that secure the cover to the computer.
4. Follow the procedures in
After Working Inside Your Computer
12

Front Bezel 3

Removing The Front Bezel

1. Follow the procedures in
2. Remove the
3. Pry the front bezel-retention clips away from the chassis.
4. Rotate the bezel away from the computer to release the hooks on the opposite edge of the bezel from the chassis.
cover
Before Working Inside Your Computer
.
.
13

Installing The Front Bezel

1. Place the hooks on the notches in the computer.
2. Rotate the front bezel towards the computer.
3. Press the front bezel till the tabs snap into place.
4. Replace the
5. Follow the procedures in
cover
.
After Working Inside Your Computer
.
14

Expansion Card 4

Removing The Expansion Cards

1. Follow the procedures in
2. Remove the
3. Press the release tab on the card-retention latch.
4. Press on the release-lever to release the securing tab from the notch in the card.
cover
Before Working Inside Your Computer
.
.
5. Ease the card up and out of its connector and remove it from the computer.
15

Installing The Expansion Card

1. Place the card into it's socket and press it in till it snaps into place.
2. Secure the expansion card by pushing-in the card-retention latch till it snaps into place.
3. Replace the
4. Follow the procedures in
cover
.
After Working Inside Your Computer
.
16
Fan 5

Removing The Fan

1. Follow the procedures in
2. Remove the
3. Disconnect the fan cable from the system board.
4. Remove the screws that secure the fan to the computer.
cover
Before Working Inside Your Computer
.
.
5. Remove the fan from the computer.
17

Installing The Fan

1. Place the fan at it's location on the computer.
2. Replace the screws that secure the fan to the computer.
3. Connect the fan cable to the system board.
4. Replace the
5. Follow the procedures in
cover
.
After Working Inside Your Computer
.
18

Memory 6

Removing The Memory

1. Follow the procedures in
2. Remove the
3. Press down on the memory-retention tabs on each side of the memory module.
4. Lift the memory module out of the connector on the system board.
cover
Before Working Inside Your Computer
.
.
19

Installing The Memory

1. Press the memory module into it's connector on the system board till it snaps into place.
2. Replace the
3. Follow the procedures in
cover
.
After Working Inside Your Computer
.
20

Optical Drive 7

Removing The Optical Drive

1. Follow the procedures in
2. Remove the
3. Disconnect the data cable and power cable from the optical drive.
4. Remove the screws that secure the optical drive to the computer.
cover
Before Working Inside Your Computer
.
.
5. Push the optical drive through the front of the computer.
21
Loading...
+ 47 hidden pages