Dell 2130cn User Manual

Volatile/

Firmware,

Statement of Volatility – Dell 2130cn

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.

The Dell 2130cn Color Laser Printer contains both volatile and non-volatile (NV) components. Volatile
components lose their data immediately after power is removed from the component. Non-volatile (NV)
components continue to retain their data even after power is removed from the component. The following
NV components are present on the system board.

Table 1. List of Volatile and Non-Volatile Components on System Board

Color Laser

Product

2130cn

Memory
Application

Usage
Statistics,
Configuration,

Memory Size

SIZE NOT
AVAILABLE

Memory

Type

EEPROM

Non-

Volatile

Non­Volatile

User
Data

No

Fax

Running
Code

Base Memory 256 MB

SIZE NOT
AVAILABLE

FLASH

DDR2-

Non-

No

Volatile

Volatile Yes

SDRAM

Optional
Memory

512 MB/
1024 MB

DDR2­SDRAM

Volatile Yes

Drum NA NA Volatile Yes

Fuser NA NA Volatile Yes

Hard Disk NA NA NA NA

CAUTION: All other components on the motherboard will lose data if power is removed from the system. Primary
power loss (unplugging the power cord) will cause user data on the memory to be lost.

Notes

:

• EEROM may be used and could contain user data.

• User Data utilized by memory type.

• User data is not stored in EEPROM.

• User data is not stored in FLASH.

• Latent image is user data.

• User data remains as photogene on the surface of Fuser roll.

______________

Copyright © 2014 Dell Inc. All rights reserved.

This product is protected by U.S. and international copyright and intellectual property laws. Dell and the Dell logo are trademarks of
Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their
respective companies.

February 2014