Delfield SSDRL2-S User Manual

®
Specication Line®
Self-Contained Solid Door Two-Section Dual Temp Refrigerator/Freezer Reach-Ins
Models
Full door Half d oor
SSDRL2-S SSDRL2-SH Refrigerato r left hand sta inle ss e xter ior and inte rior
SSDFL2-S SSDFL2-SH Freezer l eft hand sta inle ss e xter ior and inte rior
SADRL2-S SADRL2-SH Refrigerato r left hand sta inle ss e xter ior and alum inum int erior
SADFL2-S SADFL2-SH F reeze r left hand sta inless e xter ior and alum inum int erio r
SMDRL2-S SMDRL2-SH Refrigerato r left hand sta inle ss f ront a luminum exte rior a nd int erio r
SMDFL2-S SMDFL2-SH Fre ezer lef t hand stainless front aluminum e xter ior and inte rior
Specication Line®: Solid Door Two-Section Dual Temp Refrigerator/Freezer Reach-Ins
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity _________________ _______________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ _____________________ ___________
SSDRL2-S
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed oor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters axed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling of each compartment, the interior incandescent lights are controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without
Standard Features
Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Aluminum interior and exterior, stainless front
• (SM) Built in door locks with heavy duty strikes
• Recessed metal door handle
• Pressure relief valve is standard to prevent door
• vapor lock Two exterior digital thermometers with high/
• low temperature alarm Easy to use electronic control
• Easy access “ip up” shroud
• Three wire shelves per section - SA/SS standard
• with chrome plated shelves and SM standard with epoxy coated shelves Tough ABS interior door liners
• 10’ attached cord and plug
• 6” adjustable stainless steel legs
• Stainless steel breaker strips
• High density foamed in place environmentally
• friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low Energy savings door heater switch
• Two year parts & labor warranty
• Five year compressor warranty
impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.
Refrigeration system: Each compartment has its own separate refrigeration system. Condensing units are located on top of the cabinet, outside the food zone, behind the removable upper shroud. Evaporator coils are located inside the cabinet mounted to the interior ceiling of each compartment. Defrost is automatic. Condensate travels down a tube in the cabinet side wall to a receptacle mounted to the exterior bottom of the cabinet where it is evaporated with the aid of an electric heater. Each compartment’s temperature is individually monitored and controlled using Deleld’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption. Two exterior digital thermometers display temperature. Refrigerator compartment maintains between 27°F and 40°F. Freezer compartment maintains temperature between -5ºF and 0ºF.
Electrical: Unit comes with one 10’ cord and plug with single point connection to all cabinet and refrigeration system electronics. It is attached to a junction box mounted on the exterior top of the cabinet.
Options & Accessories
Security (prison) package 6” polyurethane casters Door eld rehingability Stainless steel interior door liner Additional shelves Tray slides Stainless steel back Laminate on front, sides and back Bottom mount electrical Stainless steel banking strip Heat shield end Stainless steel kick plate Laminate kick plate 4” stainless steel utility base 230-50-1 electrical 220-60-1 electrical
980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619
www.delfield.co m
®
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
SPECIFICATION LINE
56.00
34.00
83.00
34.00
SPECIFICATION LINE
PLAN VIEW
6.12”
15.5cm
81.12”
206.0cm
75.00”
190.5cm
58.00”
147.3cm
30.00”
76.2cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
ALL MODELS
Self-Contained Solid Do or Two -Section Dual Temp Ref rigerato r/Freezer Reach- Ins
Mechanical Data
SSDRL2-S, SADRL2-S, SMDRL2-S
SSDRL2-SH, SADRL2-SH, SMDRL2-SH
SSDFL2-S, SADFL2-S, SMDFL2-S
SSDFL2-SH, SADFL2-SH, SMDFL2-SH
Specication Line®
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8
ELEVATION VIEW
SSDRL2-S, SADRL2-S, SMDRL2-S
SSDFL2-S, SADFL2-S, SMDFL2-2
MODEL NUMBER DESCRIPTION VOLTAGE AMPS
LEFT DR REF
RIGHT DR FRZ
LEFT DR FRZ
RIGHT DR REF
Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619 www.delfield.co m
115 115
115 115
SSDRL2-SH, SADRL2-SH, SMDRL2-SH
6.8
7.8
7.8
6.8
ELEVATION VIEW
SSDFL2-SH, SADFL2-SH, SMDFL2-SH
STORAGE
CU.FT.
24.96
24.96
24.96
24.96
SHELVES
SQ.FT.
NO. OF
SHELVES
12.81
12.81
12.81
12.81
Printed in the U.S.A. DSSSD2 06/08
END VIEW
ALL MODELS
BTU/HR
H.P.
SYSTEM CAP
3
1/4
3
1/2
3
1/2
3
1/4
2092 1516
1516 2092
SHIP
WEIGHT
730lbs
(331kg)
730lbs
(331kg)
NEMA
PLUG
5-15P 5-15P
5-15P 5-15P
ENERGY
(KWH)
N/A
N/A
Loading...