Delfield SE-HC2 User Manual
Shelleybasic
TM
by Deleld
SE-HC/SES-HC
Hot/Cold Self-Contained Combination Counters
Models
• SE-HC2 39” Hot/cold self-contained counter
• SE-HC3 50” Hot/cold self-contained counter
• SE-HC4 64” Hot/cold self-contained counter
• SE-HC5 78” Hot/cold self-contained counter
• SE-HC6 92” Hot/cold self-contained counter
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
SE-HC/SES-HC: Hot/Cold Self-Contained Combination Counters
SE-HC3
Specifications
Exterior Top: Constructed of stainless steel, welded, ground
and polished into one integral unit. Top is fabricated with
square exterior corners.
Interior: Well is 8.00” (20cm) deep and creased to a 1.00” (3cm)
diameter drain. Unit is provided with adapter bars to allow
placement of 12.00” x 20.00” (30cm x 51cm) pans. Adjustable
stainless steel pan rest for flush mount heating or 2.00” (5cm)
recessed cooling to accommodate up to 6.00” (15cm) deep
12.00” x 20.00” (30cm x 51cm) pans, supplied by others. Sides
are wrapped with refrigeration lines and insulated with 1.00”
(3cm) of environmentally friendly, Kyoto Protocol Compliant,
Non ODP (Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane foam insulation. Unit is
equipped with drain, gate valve and garden hose hookup.
Stainless steel immersion heater(s) installed in bottom for wet
only heating operation.
Exterior Body: is open frame construction with stainless steel
corners; stainless steel full bottom shelf and stainless steel
C-channel front and sides for optional accent panels.
Standard Features
• Counters are standard with single 8” deep
stainless steel food tank (which can be
switched from heated to chilled operation
with the flip of a switch), condensing unit,
drain with valve, cord and plug, and 5”
swivel, locking casters
• Stainless steel immersion heaters with
stainless steel perforated covers
• Hot operation requires water in the well
• 16 gauge stainless steel tops
• Open on the operator’s side, furnished with
a full bottom stainless steel shelf
• Delfield’s exclusive Delrite™ ABS or
laminated modesty panels in front and ends
of unit
• Stainless steel immersion heater with auto
reset
• SE-HC models have a 36” work height,
SES-HC models have a 30” work height
• Black laminate backs each laminated
modesty panel
• Adapter bars for 12”x20” pans are provided
as standard
• High density environmentally friendly,
Condensing Unit: is suspended below the well on a steel
frame. Condensing unit uses environmentally friendly HFC-
404A refrigerant. Unit has three-wire electrical junction box
mounted to the underside of the unit.
Operation: Control panel contains 3-way Hot/Cold/Off power
switch and thermostat for heated operation. As a safety
feature, the food well immersion heater includes a high limit
safety switch. If the heater gets too hot the safety switch will
trip, turn the heater off and illuminate a control panel pilot
light.
Casters: Units are mounted on 5.00” (13cm) diameter swivel
casters with non-marking polyolefin tires and plate brakes.
Overall height of caster assembly is 6.00” (15cm).
Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non
GWP (Global Warming Potential)
polyurethane foam insulation
• One year parts and 90 day labor
standard warranty
Options &
Accessories
• Tray slide
• Cutting board
• Work shelf
• Pin alignment
• Food shields
• Overshelf
• Light fixtures*
• Heat lamps*
• 115/15A outlet*
• End shelf
• Legs
* Inclusion of this option will alter the
electrical specifications
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Shelleybasic
by Deleld
TM
39.00”
99cm
Plan View
SE-HC2, SES-HC2
Plan View
SE-HC5, SES-HC5
78.00”
198cm
29.00”
74cm
Plan View
SE-HC3, SES-HC3
36.00”
91cm
50.00”
127cm
29.00”
74cm
29.00”
74cm
Plan View
SE-HC4, SES-HC4
92.00”
234cm
Plan View
SE-HC6, SES-HC6
64.00”
163cm
29.00”
74cm
29.00”
74cm
30.00”
76cm
Hot/Cold Self-Contained Combination Counters
Elevation View
SE-HC Models
Side View
SE-HC Models
(shown with ABS Panel)
Elevation View
SES-HC Models
(Option S added)
Specifications
Model
12”X20”
Pans Held
V/Hz/Ph H.P. Amps NEMA Plug Ship Weight
SE-HC2 2 120/60/1 1/4 24.0 5-30P 350lbs/159kg
SE-HC3 3 120-240/60/1 1/4 21.0 14-30P 425lbs/193kg
SE-HC4 4 120-240/60/1 1/4 21.0 14-30P 500lbs/227kg
SE-HC5 5 120-240/60/1 1/4 42.0 14-60P 575lbs/261kg
SE-HC6 6 120-240/60/1 1/3 42.0 14-60P 650lbs/295kg
Add S for 30" high models (example SES-HC).
SE-HC/SES-HC
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DSHC
05/12
Loading...