Page 1
F14EW
31.50” (80 cm) Deep Electric Hot Food Tables - Single Tank
Models
• F14EW232 2 openings in a 32” long electric hot food table
• F14EW348 3 openings in a 48” long electric hot food table
• F14EW460 4 openings in a 60” long electric hot food table
• F14EW572 5 openings in a 72” long electric hot food table
• F14EW688 6 openings in an 88” long electric hot food table
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
F14EW: 31.50” (80 cm) Deep Electric Hot Food Tables - Single Tank
Shown with optional cutting board,
F14EW232
1/3 size pans and goose neck faucet
Specifications
Exterior top is one-piece 16-gauge stainless steel, with
integral 2.12” (5.6cm) square nosing on front and 4” (10.1cm)
high by 2.00” (5.1cm) thick backsplash on rear. Interior sides
are 22-gauge stainless steel.
Top to have 11.87”x 19.87” (30.2cm x 50.5cm) openings to hold
pans (supplied by others). Unit has (1) 16-gauge stainless steel
tank with 1” (2.5cm) drain with gate valve. Units 32”, 48” or
60” in length have (1) 5kw electric immersion heater; 72” and
88” lengths have (2) 5kw electric immersion heaters located
beneath openings. Heaters are standard at 240V, single phase
(*208V available upon request). Control to be mounted in front
edge of 8” (20.3cm) wide stainless steel plate shelf.
Manual fill faucet that extends 2.5” (6.4cm) above backsplash
is standard.
Lower portion of unit to have 22-gauge stainless steel open
shelf.
Electrical connections are 120/240V. Unit must be hard wired.
Legs: Unit is mounted on 6.13” (15.6cm) high adjustable
stainless steel legs.
Standard Features
• Top is constructed of 16-gauge stainless
steel
• Units are standard with unfinished ends
• Work height is 36” standard
• 14-gauge U-channel is welded and glued
under the top for strength and sound
deadening
• Standard manual fill faucet
• Standard gate valve
• Units supported with two 14-gauge leg rails
• 6.12” adjustable full stainless steel leg and
bullet feet
• Stainless steel sides with double hemmed
bends for additional strength
• Heavy duty 8.00” deep plate shelf
• Bottom shelf constructed with double
hemmed nosing and 20-gauge U-channels
with PL-400 sound deadening adhesive
• Must be hard wired in the field
• Thermostat control standard
• Wet only tank made of 316 series stainless
steel
• Standard with 1” drain
• (1) 5000 watt electric immersion heater for
NOTE: Model F14EW hot food tables are designed to be
operated with water in the tank only. Use of the equipment
without water in the tank will result in damage to the
equipment and will void the warranty.
units up to 60” and two for units over
60”
• One year parts and 90 day labor
standard warranty
Options &
Accessories
• Stainless steel end or back
• Laminate end or back
• Auto fill assembly (mechanical float)
• Auto fill assembly (electric probe)
• Cutting board (0.5” x 10” composite)
• Locks
• Dry drawers
• CE approved versions*
• Three phase electrical system*
* Inclusion of this option will alter the
electrical specifications
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Page 2
32.00”
82cm
48.00”
122cm
60.00”
152cm
4.00"
10cm
3.12"
8cm
Hot Water Supply
Junction Box
Drain
15.50"
39cm
Plan View
F14EW232
Elevation View
F14EW232
72.00”
183cm
Plan View
F14EW572
Plan View
F14EW348
Elevation View
F14EW348
Plan View
F14EW460
Elevation View
F14EW460
88.00”
224cm
Plan View
F14EW688
Plan View
Mechanical Data
All Units
Electric supply, stub up 4.00" (10cm) from oor.
Hot water supply, 1/2" FPT connection,
36.00” (91cm) above oor.
Waste, 1” FPT 20.00” (51cm) above oor.
31.50”
80cm
36.00”
91cm
8.00"
20cm
40.00”
102cm
Elevation View
F14EW572
Elevation View
F14EW688
31.50” (80 cm) Deep Electric Hot Food Tables — Single Tank
Specifications
Model
Number Of
Openings
V, Hz, Ph
F14EW232 2 120/240, 60, 1 21.0 24.0 316/143
F14EW348 3 120/240, 60, 1 21.0 24.0 440/199
F14EW460 4 120/240, 60, 1 21.0 24.0 500/227
F14EW572 5 120/240, 60, 1 42.0 48.0 560/254
F14EW
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
F14EW688 6 120/240, 60, 1 42.0 48.0 660/299
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DSF14EW
10/11
Standard
Amperage
7.62”
6.12”
19cm
16cm
Side View
All Models
Amperage with
Optional 120/208V
Ship Weight
lbs/kg
Loading...