Delfield F18RR60 General Manual
Short Form Specifications
Exterior top is one-piece, 16-gauge stainless steel, with integral 2.12”
(5.4cm) high square nosing on front. Top has a mechanically cooled refrigerated raised rail at rear with openings to accommodate 1/6 size pans. Pans and
adapter bars are provided by others. Pans are recessed 3” (7.6cm) or 2”
(5.1cm) and set on adjustable stainless steel pan supports. Rail interior is 22gauge stainless steel. Raised rail openings have 20-gauge stainless steel removable lids. Unit is equipped with separate expansion valve and on/off switch for
refrigerated rail. Temperature in top opening to maintain 33°F (1°C) to 41°F
(5°C), with pans recessed 3” (7.6cm), at 86°F ambient room temperature,
meeting NSF7 requirements.
Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are
finished with 18-gauge galvanized steel.
Base Interior is 22-gauge stainless steel back and bottom. Base interior ends
and door frames are thermoformed ABS plastic. Base is insulated with 1.5”
(3.8cm) high density foamed in place polyurethane.
Door(s) have a 22-gauge stainless steel exterior front, with thermoformed
ABS plastic interior liner, black recessed handle and snap in magnetic gasket
which is easily replaceable. Each interior door section has (1) removable
epoxy coated wire shelf.
Base has a blower coil assembly with expansion valve located behind door
mullion. Base is equipped with independently controlled thermostat and solenoid valve. On/off switch for unit is located behind the hinged panel.
Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit must be
hard wired.
Refrigeration System Components — HFC-404A
Optional Accessories & Modifications
906A Stainless steel end
505H Stainless steel back
505F Laminate facing (full front)
906E Laminate end
905A Laminate back
1030A Cutting board (Sanalite or composite)
109 Condensate evaporator (1 per coil) for base
107F Tray rack
102 Drawers
A-(2) 19” in lieu of one door
B-(2) 27” in lieu of one door
C-(2) 32” in lieu of one door
108 Locks
120F Cold pan drain
213 *220V/50 cycle
*Inclusion of this option will alter the
electrical specifications of the unit
Model F18RR79
31.5” (80cm) Deep Remote Reduced Height Rail
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company.All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
F18RR
®
F18RR
The Delfield Company, P.O. Box 470, Mt Pleasant, MI 48804-0470, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2001 The Delfield Company.All rights reserved. Printed in U.S.A.
31.5” (80cm) Deep Remote Reduced Height Rail
19" (48.3cm)
REF'G
19" (48.3cm)
REF'G
ELEVATION VIEW
F18RR44
27" (68.6cm)
REF'G
27" (68.6cm)
ELEVATION VIEW
F18RR60
REF'G
6" [15.2cm]
6" [15.2cm]
19" (48.3cm)
REF'G
27" (68.6cm)
REF'G
ELEVATION VIEW
F18RR52
32" (81.3cm)
REF'G
ELEVATION VIEW
F18RR70
6" [15.2cm]
32" (81.3cm)
REF'G
6" [15.2cm]
27" (68.6cm)
REF'G
19" (48.3cm)
REF'G
27" (68.6cm)
REF'G
ELEVATION VIEW
F18RR79
6" [15.2cm]
27" (68.6cm)
REF'G
27" (68.6cm)
REF'G
ELEVATION VIEW
F18RR87
27" (68.6cm)
REF'G
6" [15.2cm]
Loading...