![](/html/71/71a9/71a910c32b6de41a0015ef1a2458c83380b53a985400e66f0012cb74c15fd6c6/bg1.png)
F17VD
Component Crafted Versa Drawer™ Equipment Stand
Models
• F17VD84 84” Versa Drawer with (2) 32” drawers
• F17VD84-CE 84” Versa Drawer with (2) 32” drawers, CE approved
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
F17VD: Component Crafted Versa Drawer™ Equipment Stand
1
2
F17VD84
Specifications
Exterior Top: Constructed of one-piece heavy-gauge stainless
steel with integral 2.12” (54mm) high square nosing at front
and 1” (25mm) x 10” (25cm) sides and rear. 1.25” thick x 9.5”
wide maple cutting board mounted on stainless steel sides.
Exterior Sides, Back and Bottom: Heavy-gauge stainless steel
side with removable stainless steel mechanical access panel on
compressor end. Back, bottom and drawer end are constructed
of galvanized steel.
Interior of each drawer section is a polyethylene rotocast liner
with ABS drawer front liners
Drawers: Heavy-gauge stainless steel exterior front, with a
thermoformed ABS plastic interior liner. Frame and tracks are
constructed of stainless steel. Roller track assemblies have
self-lubricating Delrin™ rollers.
Refrigeration System: Environmentally friendly HFC-404A
refrigerant. Each independent drawer has it’s own evaporator
coil with expansion valve. Digital control acts as thermometer,
thermostat and diagnostic center for each drawer. Hot gas
defrost system is also utilized during thaw operation.
Standard Features
• 4 temperature operation-each drawer is
completely independent and can operate as
a refrigerator, freezer, chiller or thaw cabinet
at any time
• Easy to use microprocessor control with push
button function selection
• Alarm notifications and service diagnostics
• Heavy-gauge stainless steel top
• Standard on 6” adjustable legs
• Mechanical access on compressor end of unit
• 32” heavy duty full extension drawers with (2)
12”x20” pan capacity per drawer
• NSF 7 certified
• High density environmentally friendly,
Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global
Warming Potential) polyurethane foam
throughout
• Dart style quick change gaskets
• 8’ long electrical cord
• Environmentally friendly HFC-404A refrigerant
• 1.25”x9.5” maple cutting board
• One year parts, one year labor and 5 year
compressor warranty
Electrical Connections: Two electrical configurations are
available: 115 volt, 60 Hertz, single phase and 230 volt, 50
Hertz, single phase. An 8’ cord and plug are supplied and
attached.
Installation: Units built into chef counters or production
centers must accommodate 24” of clearance on compressor
end for service access.
The Delfield Versa Drawer is a unique food holding device
that includes an open food container disposed within a
refrigerated cabinet such that both the container and
interior of the cabinet are exposed to the same refrigerated
environment, thereby eliminating the need for conventional
dual environment systems which refrigerate food disposed
within insulated, closed containers, while maintaining the
interior of the cabinet at ambient temperature.
Options &
Accessories
• Casters
• Stainless steel end
Only Model
F17VD84-CE
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
![](/html/71/71a9/71a910c32b6de41a0015ef1a2458c83380b53a985400e66f0012cb74c15fd6c6/bg2.png)
84.00”
213cm
64.00”
163cm
84.00” X 9.50” X 1.25”
(213cm X 24cm X 3cm)
Maple Cutting Board
Plan View
20.00”
51cm
30.75”
78cm
Component Crafted Versa Drawer™ Equipment Stand
32" Versa Drawer 32" Versa Drawer
Elevation View Right End View
37.40”
1
2
95cm
26.00”
66cm
7.62”
19cm
6.12”
16cm
36.15”
92cm
Installation Note: Units built into
chef counters or production centers
must accommodate 24” of clearance on
compressor end for service access.
Specifications
Model
32”
Drawers
12”x20”
Pans
H.P. V/Hz/Ph Amps
Nema
Plug
Ship Weight
lbs/kg
F17VD84 2 4 1/3 115/60/1 6.0 5-15 520/236 1.50*/4.01**
F17VD84-CE 2 4 1/3 230/50/1 3.6 BS1373 520/236 1.50*/4.01**
*All drawers refrigerators
F17VD
** All drawers freezers
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DSF17VD
05/12
Energy
KWH/Day