Delfield F17R102 User Manual

F17R

Remote Refrigerated Base Equipment Stands

Models

• F17R44 - 44”length, 4 12”x20” pan capacity

• F17R79 - 79”length, 10 12”x20” pan capacity

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

F17R: Remote Refrigerated Base Equipment Stands

• F17R52 - 52”length, 6 12”x20” pan capacity

• F17R60 - 60”length, 8 12”x20” pan capacity

• F17R70 - 70”length, 8 12”x20” pan capacity

F17R79

• F17R87 - 87”length, 12 12”x20” pan capacity

• F17R102 - 102”length, 12 12”x20” pan capacity

Standard Features

• Top is 18-gauge stainless steel, with integral front marine edge

• Cutting board brackets with 1.25” thick x 9” deep maple cutting board

• High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout unit

• Snap in dart style vinyl magnetic gasket

• Drawer handles are recessed black plastic and

held in with a positive lock system

• 6.12” adjustable full stainless steel legs

• Interior refrigerated base maintains 36º to 41º

• Digital thermometer

• Drawer system is sized to hold 12” x 20” x 4”

deep hotel pans (by others). The drawer system is all stainless steel construction for maximum durability

• Environmentally friendly HFC-404A refrigerant

• One year parts and 90 day labor standard

warranty

Options & Accessories

• Electric condensate evaporators

• Stainless steel back

• Stainless steel end

• Laminate facing (drawers only)

• Laminate back

• Laminate end

• Casters

• Locks

• 220V/50 cycle electrical*

* Inclusion of this option will alter electrical

specifications.

Specifications

Stainless steel top is constructed with integral front marine edge nosing and rear backsplash. Stainless steel interior subtop is made integral with the top by injecting 2.00” of high density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam between the exterior and interior tops. Cutting board brackets are attached to each side and house a 1.25” thick x 9.5” deep maple cutting board.

Refrigerated base exterior sides, interior back and bottom are constructed of stainless steel. Exterior bottom and back are made of galvanized steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00” of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095” thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. Exterior machine compartment side is constructed with galvanized steel.

Single units are supplied with a wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface.

Drawer system is sized to hold 12 x 20 x 4 “ deep hotel pans

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619

and smaller fractional pans. Drawer system is all stainless steel construction. Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. Each drawer front is injected with 1.87” of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system.

Legs: Unit is mounted on 6.12” adjustable stainless steel legs.

Refrigeration system components are HFC-404A. Interior

cabinet is cooled with mullion style blower coils (coated) mounted between each door/drawer section for very even air and temperature control. Models have a digital thermometer, thermostat and solenoid valve installed in the machine compartment removable access panel.

Electrical connections are 115V-60H-1PH, and must be hard wired at the installation site.

www.delfield.com

30.74” [78cm]

9.50"

[24cm]

Plan View

All Models

44.00" [112cm] 52.00" [132cm] 60.00" [152cm]

42.00" (107cm)

50.00" (127cm)

58.00" (147cm)

70.00" [178cm]

68.00" (173cm)

32.00" (81cm)

6.00"

[15cm]

Elevation View

F17R44

79.00" [201cm]

77.00" (196cm)

27.00" (69cm)

19.00" (48cm)

Elevation View

F17R79

Mechanical Access

6.00"

[15cm]

R D

J = Junction Box R = Refrigeration Lines 1/4" Liquid, 3/8" Suction D = Drain 1/2"

6.00"

[15cm]

27.00" (69cm)

19.00" (48cm)

Elevation View

6.00"

[15cm]

27.00" (69cm)

F17R52

27.00" (69cm)

6.00"

[15cm]

27.00" (69cm)

6.00"

[15cm]

Elevation View

F17R60

87.00" [221cm] 102.00" [259cm]

85.00" (216cm) 100.00" (254cm)

27.00" (69cm)

6.00"

[15cm]

32.00" (81cm)

Elevation View

F17R87

19" & 32” drawers extend 26.08” (66cm) 27” drawers extend 28.18” (72cm)

32.00" (81cm)

Elevation View

F17R70

32.00" (81cm)

Elevation View

F17R102

36.00"

[91cm]

7.62"

[19cm]

32.00" (81cm)

6.12"

[16cm]

End View

All Models

6.00"

[15cm]

6.00"

[15cm]

Specifications

Remote Refrigerated Base Equipment Stands

Model

F17R44

F17R52

# of

Drawers

(2) 32” 4 1/5 115/60/1 3.0 452 120/4°/33° 300lbs/136kg

(2) 19 & (2)

12x20x4 Pan

Capacity

Recommended

H.P.

V/Hz/Ph Amps

6 1/5 115/60/1 3.0 556 120/5°/32° 350lbs/159kg

27”

F17R60

F17R70

F17R79

(4) 27” 8 1/5 115/60/1 3.0 632 120/5°/32° 396lbs/180kg

(4) 32” 8 1/4 115/60/1 3.0 726 120/6°/31° 450lbs/204kg

(2) 19 & (4)

10 1/4 115/60/1 6.0 868 240/4°/33° 525lbs/238kg

27”

F17R87

F17R102

F17R

(6) 27” 12 1/4 115/60/1 6.0 1001 240/4°/33° 560lbs/254kg

(6) 32” 12 1/3 115/60/1 6.0 1143 240/5°/32° 610lbs/276kg

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com

Printed in the U.S.A. DSF17R 05/12

BTU Design

Load

Evap Cap. BTU/

TD/Temp

Ship Weight