Delfield F17FC60 User Manual

F17FC

Self-Contained Freezer Base Equipment Stands

Models

• F17FC60 - 60” length freezer base chef stand with (2) 32” drawers

• F17FC76 - 76” length freezer base chef stand with (2) 19” and (2) 27” drawers

• F17FC84 - 84” length freezer base chef stand with (4) 27” drawers

• F17FC94 - 94” length freezer base chef stand with (4) 32” drawers

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

F17FC: Self-Contained Freezer Base Equipment Stands

F17FC76

Specifications

Stainless steel top is constructed with integral front marine

edge nosing and rear backsplash. Stainless steel bars run

front to back on both sides for support and spline purposes.

Stainless steel interior sub-top is made integral with the top by

injecting 2.00” of high density environmentally friendly, Kyoto

Protocol Compliant, Non ODP (Ozone Depletion Potential),

Non GWP (Global Warming Potential) polyurethane foam

between the tops. Cutting board brackets are attached to each

side and house a 1.25” thick x 9.5” deep maple cutting board.

Refrigerated base exterior sides, interior back and bottom

are constructed of stainless steel. Exterior bottom and back

are made of galvanized steel. Both left and right interior sides

are formed of ABS plastic. The base is injected with 2.00” of

high density polyurethane foam between the exterior and

interior. Refrigerated base fronts are made of .095” thick ABS

thermoformed plastic and backed up by ridged polyurethane

water blown injection molded frames. Exterior machine

compartment side is constructed with galvanized steel.

Single units are supplied with a wall-mount bracket and

threaded rod are provided for installation of the unit against

a solid surface.

Standard Features

• Top is stainless steel, with integral front marine edge

• Cutting board brackets with 1.25” thick x 9” deep maple cutting board

• High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout unit

• Snap in dart style vinyl magnetic gasket

• Drawer handles are recessed black plastic and

held in with a positive lock system

• 6.12” adjustable stainless steel legs

• 8’ cord and plug

• Digital thermometer

• Drawer system is sized to hold 12” x 20” x 4”

deep hotel pans (by others). The drawer system is all stainless steel construction for maximum durability

• Environmentally friendly HFC-404A refrigerant

• One year parts and 90 day labor standard

warranty

Drawer system is sized to hold 12 x 20 x 4 “ deep hotel pans

and smaller fractional pans. Drawer system is all stainless steel

construction. Tracks are designed with a stay shut feature that

holds the drawer gasket tight to the base front on uneven

floors. Exterior drawer fronts are made of stainless steel; and

an interior made of ABS plastic with formed in channels to

house the snap-in dart style santoprene gasket. Each drawer

front is injected with 1.87” of high density polyurethane foam

between the exterior and interior. Handles are recessed black

plastic and held in with a positive lock system.

Freezer system components are HFC-404A. Interior cabinet

is cooled with mullion style blower coils (coated) mounted

between each door/drawer section for very even air and

temperature control. Self-contained models have a pre-

wired condensing unit and a digital thermometer installed

in the machine compartments (standard on right) louver

panel. Interior freezer base cabinet will maintain 0° to 5°F

temperatures at 100°F ambient room temperature.

Electrical connections are 115V-60Hz-1Ph. Units are supplied

with an 8’ cord and plug.

Options & Accessories

• Stainless steel back

• Stainless steel end

• Laminate facing (drawers only)

• Laminate back

• Laminate end

• Casters

• Doors, except 32"

• Locks

• 220V/50 cycle electrical*

* Inclusion of this option will alter electrical

specifications

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619

www.delfield.com

Varies

30.74"

[78cm]

9.50"

[24cm]

Plan View

All Models

60.00" [152cm]

58.00" (147cm) 74.00" (188cm)

32.00" (81cm)

10.00"

(25cm)

Elevation View

18.00"

(46cm)

19.00" (48cm)

6.00"

(15cm)

Elevation View

F17FC60

94.00" [239cm]

76.00" [193cm]

27.00" (69cm)

F17FC76

18.00"

[46cm]

D D

Mechanical Access

24"

(60.1cm)

27.00" (69cm)

6.00"

(15cm)

24.00"

[61cm]

84.00" [213cm]

82.00" (208cm)

Elevation View

F17FC84

C = Condensing Unit

J = Junction Box W/8ft (2.4m) Cord And Plug

D = 1/2" Drain

27.00" (69cm)

24.00"

(61cm)

92.00" (234cm)

32.00" (81cm)

6.00"

(15cm)

32.00" (81cm)

24.00"

(61cm)

Elevation View

F17FC94

Self-Contained Freezer Base Equipment Stands

Specifications

Model # Of Drawers

F17FC60

F17FC76

F17FC84

F17FC94

F17FC

Deleld reserves the right to make changes to the design or specications without prior notice.

(2) 32” 4 1/2 115/60/1 12.0 1242 1776 5-15P 450lbs/208kg

(2) 19 & (2) 27” 6 3/4 115/60/1 16.0 1461 2713 5-20P 600lbs/272kg

(4) 27” 8 3/4 115/60/1 16.0 1647 2713 5-20P 635lbs/288kg

(4) 32” 8 3/4 115/60/1 16.0 1879 2713 5-20P 710lbs/322kg

12”x20” Pan

Capacity

H.P. V/Hz/Ph Amps

19" & 32” drawers extend 26.08” (66cm) 27” drawers extend 28.18” (72cm)

BTU Design

Load

36.00"

(91cm)

7.62"

(19cm)

BTU System

Capacity

6.12"

(16cm)

End View

All Models

Nema

Plug

Ship Weight

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com

Printed in the U.S.A. DSF17FC 02/12