Delfield CM-2 User Manual
Short Form Specifications
Cabinet top surface shall be 16-gauge stainless steel with all cor-
ners welded and polished and reinforced with heavy-gauge channels.
Insulated folding lid shall be stainless steel with high impact plastic
liner and have chrome plated, die cast handles. Opening shall have a
throat liner constructed of high impact plastic.
The exterior sides and the watertight inner liner shall be 22-gauge
stainless steel. The unit shall be insulated with foamed-in-place high
density polyurethane. Unit to be equipped with 4.00" (10.2cm) diameter, polylefin swivel casters and non-marking gray corner bumpers.
Refrigeration system controlled by an electronic control with built in
defrost timer. System will also include a blower coil and a condensate
evaporator. Unit designed to maintain a temperature setting from -5ºF
to 40ºF (-21ºC to 4ºC).
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
CM/CP
Mobile chilled mug and plate dispensers
THE FOLLOWING APPLIES TO MODELS CP-2 AND CP-4 ONLY:
On CP-2 and CP-4, stainless steel perforated dispenser tubes (2 on
CP-2 and 4 on CP-4) for plates shall be furnished with properly calibrated, non-fatiguing stainless steel springs. Each dispenser tube
shall have a maximum capacity of approximately 50 plates.
NOTE: The maximum dish diameter that can be dispensed by these
models is 9.62" (24.4cm).
THE FOLLOWING APPLIES TO MODEL CM-2 ONLY:
On CM-2, self-leveling mechanism to be field adjustable by adding or
removing stainless steel extension springs on perimeter of vertical
side channels. A 20.00" x 20.00" (50.8cm x 50.8cm) carrier tray shall
be provided. The dispenser shall have a capacity of three to four 20"
x 20" racks (50.8cm x 50.8cm). Racks are not supplied by Delfield;
most hold 20-25 mugs.
Optional Accessories and Modifications
• Heavy duty casters (consult factory)
• Fiberglass panels
• Laminate panels
• Lid-locking device (specify model number)
MODEL CP-4
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
20.37"
51.8cm
48.00"
121.9cm
20.37"
51.8cm
32.50"
82.55cm
13.12"
33.3cm
CM/CP
Mobile chilled mug and plate dispensers
48.00"
20.37"
51.8cm
121.9cm
13.12"
33.3cm
PLAN VIEW
CM-2 MODELS
ELEVATION VIEW
CM-2 MODELS
2.50"
6.4cm
28.00"
71.1cm
23.12"
58.7cm
PLAN VIEW
CP-2 MODELS
ELEVATION VIEW
CP-2 MODELS
MAX
9.62"
24.4cm
2.40"
6.1cm
1.87"
4.8cm
28.00"
71.12cm
23.12"
58.7cm
ELEVATION VIEW
CP-4 MODELS
2.40"
6.1cm
PLAN VIEW
CP-4 MODELS
MAX
9.62"
24.4cm
1.87"
4.8cm
28.00"
71.12cm
36.00"
91.4cm
5.00"
12.7cm
RIGHT END
CM-2 MODELS
36.00"
91.4cm
5.00"
12.7cm
RIGHT END VIEW
CP-2 MODELS
36.00"
91.4cm
5.00"
12.7cm
RIGHT END VIEW
CP-4 MODELS
Techanical Data–Standard Unit
MODEL APPROX. ELECTRICAL NEMA SHIP
NUMBER CAPACITY CONNECTION HP AMPS PLUG WEIGHT
CM-2 60 mugs 120V/60 Hz/ single phase 1/3 10.0 5-15P 485lbs - 200kg
CP-2 100 plates or bases 120V/60 Hz/ single phase 1/3 10.0 5-15P 410lbs - 186kg
CP-4 200 plates or bases 120V/60 Hz/ single phase 1/3 10.0 5-15P 485lbs - 220kg
NOTES:
• These models include a 9' (2.7cm) cord with NEMA 5-15 plug.
• The following information is required with an order to ensure proper operation of CP-2 and CP-4 models:
1) Height of one plate.
2) Overall diameter of the plate,
3) Height of a stack of eleven plates, and
4) Weight of a stack of 10 plates.
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSCM_CP 05/02
Loading...