Delfield CAB3-1013-QT User Manual
Shelleymatic
TM
by Deleld
CAB3
Mobile Enclosed Three-Stack Dish Dispensers
Models
CAB 3-50 0 3-S tack unh eated dis h d ispen ser
•
CAB 3-57 5 3-S tack unh eated dis h d ispen ser
•
CAB 3-65 0 3-S tack unh eated dis h d ispen ser
•
CAB 3-72 5 3-S tack unh eated dis h d ispen ser
•
CAB 3-81 3 3-S tack unh eated dis h d ispen ser
•
CAB 3-91 3 3-S tack unh eated dis h d ispen ser
•
CAB 3-10 13 3-S tack unh eated dis h d ispen ser
•
CAB 3-12 00 3-S tack unh eated dis h d ispen ser
•
CAB 3-14 50 3-S tack unh eated dis h d ispen ser
•
CAB 3-50 0ET 3-S tack eve n te mp h eated dis h d ispen ser
•
CAB 3-57 5ET 3-S tack eve n te mp h eated dis h d ispen ser
•
CAB 3-65 0ET 3-S tack eve n te mp h eated dis h d ispen ser
•
CAB 3-72 5ET 3-S tack eve n te mp h eated dis h d ispen ser
•
CAB 3-81 3ET 3-S tack eve n te mp h eated dis h d ispen ser
•
CAB 3-91 3ET 3-S tack eve n te mp h eated dis h d ispen ser
•
CAB 3-10 13ET 3-S tack eve n te mp h eated dis h d ispen ser
•
CAB 3-12 00ET 3-S tack eve n te mp h eated dis h d ispen ser
•
CAB 3-14 50ET 3-S tack eve n te mp h eated dis h d ispen ser
•
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity _________________ _______________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ _____________________ ___________
CAB 3-81 3QT 3-S tack qui ck t emp heat ed d ish disp enser
•
CAB 3-91 3QT 3-S tack qui ck t emp heat ed d ish disp enser
•
CAB 3-10 13QT 3-S tack qui ck t emp heat ed d ish disp ense r
•
CAB 3-12 00QT 3-S tack qui ck t emp heat ed d ish disp ense r
•
CAB 3-14 50QT 3-S tack qui ck t emp heat ed d ish disp ense r
•
CAB3 Mobile Enclosed Three-Stack Dish Dispensers
CAB3-575
with optional wrap-around bumpers
Specifications
Cab inet to p s hall be 16 -gau ge stain less st eel wit h a ll corn ers weld ed and
pol ishe d and r einf orced with h eavy -ga uge ch anne ls. Ca bine t ext erio r
pan els an d cor ner su ppor t ang les sh all be 20-g auge s tain less s teel . Unit
sha ll hav e four 4.00 " (10. 2cm) diam eter p olyo lef in swi vel ca ster s (al l
loc king ), a nd n on-m arki ng g ray bump ers at e ach corn er.
Dis pens er tu be sh all have 3 ver tica l sid e cha nnel s and a bo ttom brace
of 22 -gau ge sta inle ss ste el. Top su ppor ting f lang e shal l be 18- gaug e
sta inle ss s teel . Flan ge, chan nels an d b ottom br ace shal l b e i ntegr ally
wel ded to geth er. Flan ge sha ll hav e 3 guid e post s mold ed from h igh
imp act plas tic.
Sel f-le velin g me chan isms sha ll b e fi eld adjus tabl e by addi ng o r re movin g
sta inle ss st eel e xten sion spri ngs on pe rime ter o f ver tic al si de ch anne ls.
The dis h ca rrie r he ad s hall be stain less ste el w elde d rod s wi th a rem ovab le
18- gaug e st ainl ess stee l to p pl ate.
Cap acit y o f t ubes sh all be app roxim ately 72 d ishes , w ith a maxi mum
sta ckin g he ight of 24.0 0" ( 61.0 cm).
NOTE : M odel s wi thout “-ET ” or “ -QT” suff ix a re u nhea ted.
Standard Features
Cabinet top to be 16-gaug e stainless stee l, welded, polished
•
and reinforced
Outer body and corners to be 20-gauge sta inless steel
•
Non-marring gray corner bumper s
•
(4) 4.00” diameter polyolefin swivel casters (all loc king)
•
Top flange and bottom brace to b e 18-gauge stai nless steel
•
Flange, channel s and bottom to be integrally weld ed
•
Spring supp orts to be 14 -guage stainless steel
•
Carrier hea d made of welde d rods with a removable 18-
•
gauge top plate
Self-le veling mechani sm, field adjusta ble by adding or
•
removing spri ngs
High impac t plastic guide posts mounted to flange
•
QT/ET Standard Features
9’ cord and plug supplied
•
Convection hea ting module and fan motor per d ispenser
•
Outer 22-ga uge stainless ste el jacket around dispenser
•
Air intake shall be filtered
•
On/off switc h on each dispe nser
•
Each dispens er to have an a djustable thermosta t
•
QT - Each dispenser shall h ave a stainless s teel cover
•
ET - Ma intains temperatures between 120-140°F (49-60°C)
•
QT - Maintai ns temperatures bet ween 150-170°F (6 6-77°C)
•
One yea r parts and 90 day labor standard warrant y.
•
Additional wa rranties available.
THE FOL LOWIN G AP PLIE S TO CAB3 -ET EVE N TEM P H EATED DISP ENSE RS
ONLY: U nit s hall be sup plie d wit h 9' ( 2.7m) cord and N EMA 6- 20P p lug.
Ele ctri cal conn ecti ons shal l be 208 vol t, 6 0 he rtz , si ngle pha se.
Eac h tube shall have i ts own conve ctio n heat ing mo dule consi stin g of a
sin gle 4 00 w att h eati ng el emen t and fan moto r, loc ated in t he ce nter of t he
int erior botto m cavi ty. Air intak e shal l have a f ilte r. Each t ube sh all ha ve
an adj ustab le ther most at i nsid e t he m otor ho using an d a n O N/OFF sw itch
on one o f t he dis h g uide po sts. Un it shal l main tain te mpera ture be twee n
120 °F–1 40°F (49 °C–60 °C).
THE FOLLOW ING A PPLI ES TO CA B3-QT QUIC K TEMP H EATED D ISPEN SERS
ONLY: U nit s hall be sup plie d wit h 9' ( 2.7m) cord and N EMA 6- 20P p lug.
Ele ctri cal conn ecti ons shal l be 208 vol t, 6 0 he rtz , si ngle pha se.
Eac h tube shall have i ts own conve ctio n heat ing mo dule consi stin g of a
sin gle 7 00 w att h eati ng el emen t and fan moto r, loc ated in t he ce nter of t he
int erior botto m cavi ty. Air intak e shal l have a f ilte r. Each t ube sh all ha ve
an adj ustab le ther most at i nsid e t he m otor ho using an d a n O N/OFF sw itch
on one o f t he dis h g uide po sts. Un it shal l main tain te mpera ture be twee n
150 °F–1 70°F (66 °C–77 °C).
Eac h tu be s hall hav e a stai nles s st eel cover.
Options &
Accessories
•
•
•
•
•
•
•
•
•
•
•
•
Heavy-dut y casters (consult factory)
Flange-moun t feet in lieu of casters
Special di spenser tube heig hts
12" (30. 5cm) d ia. st ainless stee l dish
dispenser t ray (CAB3-1200, CAB3-1 200-ET
and CAB3- 1200-QT only)
Non-ma rring adjustm ent ro ds for ov al
dishes and various dish diameters (–813
through –14 50 sizes only)
Stainless steel cover with acce ss to dishes
(–813 through –1450 sizes only; standard
on QT mode ls)
Stainless steel tube cover
Hold-down rod for dispenser tubes
Wrap-around bumpers (adds 1.75" [4.4cm]
to overall length and depth )
Fiberglas® pa nels
Laminate pa nels
Special vol tages (consult fa ctory)
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
Shelleymatic
TM
by Deleld
36.00"
91.4cm
3.62"
9.2cm
5.00"
12.7cm
JUNCTION
BOX
36.00"
91.4cm
3.62"
9.2cm
5.00"
12.7cm
D
L
D
L
Plan View
CAB3
Plan View
CAB3-ET &
CAB3-QT
Elevation View
CAB3
Right End View
CAB3
Elevation View
CAB3-ET & CAB3-QT
Right End View
CAB3-ET & CAB3-QT
Spec ifications
Model Length Depth Dish Diameter Ra nge Amps Ship
Weight
CAB3-500 41.25”/104.8cm 17.00”/43.2cm 3.00”-5.00”/7.6cm-12.7cm NA 173lbs/79kg NA NA
CAB3-575 41.25”/104.8cm 17.00”/43.2cm 5.00”-5.75”/12.7cm-14.6cm NA 176lbs/80kg NA NA
CAB3-650 41.25”/104.8cm 17.00”/43.2cm 5.75”-6.50”/14.6cm-16.5cm NA 177lbs/80kg NA NA
CAB3-725 41.25”/104.8cm 17.00”/43.2cm 6.50”-7.25”/16.5cm-18.4cm NA 179lbs/81kg NA NA
CAB3-813 47.25”/120.0cm 17.00”/43.2cm 7.25”-8.12”/18.4cm-20.6cm NA 190lbs/86kg NA NA
CAB3-913 47.25”/120.0cm 17.00”/43.2cm 8.12”-9.12”/20.6cm-23.2cm NA 193lbs/88kg NA NA
CAB3-1013 47.25”/120.0cm 17.00”/43.2cm 9. 12”- 10.12”/23.2cm-25.7cm NA 196lbs/89kg NA NA
CAB3-1200 53.25”/135.3cm 19.00”/48.3cm 10 .12” -12.00”/25.7cm-30.5cm N A 21 2lbs /96kg NA NA
CAB3-1450 62.00”/157.5cm 21.50”/54.6cm 12 .00” -14.50”/30.5cm-36.8cm N A 22 9lbs /104kg N A NA
CAB3-500ET 41.2 5”/1 04.8cm 17.00”/43.2cm 3.00”-5.00”/7.6cm-12.7cm 13.0 207lbs/94kg 6-20P 208 /60/ 1
CAB3-575ET 41.2 5”/1 04.8cm 17.00”/43.2cm 5.00”-5.75”/12.7cm-14.6cm 13.0 210lbs/95kg 6-20P 20 8/60 /1
CAB3-650ET 41.2 5”/1 04.8cm 17.00”/43.2cm 5.75”-6.50”/14.6cm-16.5cm 13.0 213lbs/97kg 6-20P 20 8/60 /1
CAB3-725ET 41.2 5”/1 04.8cm 17.00”/43.2cm 6.50”-7.25”/16.5cm-18.4cm 13.0 219lbs/99kg 6-20P 20 8/60 /1
CAB3-813ET 47.2 5”/1 20.0cm 17.00”/43.2cm 7.25”-8.12”/18.4cm-20.6cm 13.0 233 lbs/ 106lg 6-20P 20 8/60/1
CAB3-913ET 47.2 5”/1 20.0cm 17.00”/43.2cm 8.12”-9.12”/20.6cm-23.2cm 13.0 239lbs/108kg 6- 20P 208 /60/ 1
CAB3-1013E T 47.25”/120.0cm 17.00”/43.2cm 9 .12”-10.12”/23.2cm-25.7cm 1 3.0 24 5lbs/111kg 6 -20P 20 8/60 /1
CAB3-1200E T 53.25”/135.3cm 19.00”/48.3cm 1 0.12 ”-12.00”/25.7cm-30.5cm 13 .0 262 lbs/119kg 6- 20P 208 /60/ 1
Mobile Enclosed Three-Sta ck Dish Dispensers
CAB3
CAB3-1450E T 62.00”/157.5cm 21.50”/54.6cm 1 2.00 ”-14.50”/30.5cm-36.8cm 13 .0 277 lbs/126kg 6- 20P 208 /60/ 1
CAB3-813QT 47.25”/120.0cm 17.00”/43.2cm 7.25”-8.12”/18.4cm-20.6cm 13. 0 243l bs/1 10kg 6 -20P 20 8/60 /1
CAB3-913QT 47.25”/120.0cm 17.00”/43.2cm 8.12”-9.12”/20.6cm-23.2cm 13. 0 249l bs/1 13kg 6 -20P 20 8/60 /1
CAB3-1013QT 4 7.25 ”/12 0.0cm 17.00”/43.2cm 9. 12”- 10.12”/23.2cm-25.7cm 13. 0 255lbs/116kg 6 -20P 208/60/1
CAB3-1200QT 5 3.25 ”/13 5.3cm 19.00”/48.3cm 10 .12” -12.00”/25.7cm-30.5cm 1 3.0 27 2lbs /123kg 6 -20P 20 8/60 /1
CAB3-1450QT 6 2.00 ”/15 7.5cm 21.50”/54.6cm 12 .00” -14.50”/30.5cm-36.8cm 1 3.0 28 7lbs /130kg 6 -20P 20 8/60 /1
NOTE: Optional adjusting rods (available on 813–1450 models only) reduce the maximum round dish diameter by 1.25" (3.2cm); overall adjustment
by rods is 1.50" (3.8cm). Non-marking adjustment rods must be ordered for each individual dispenser tube; installed at factory only.
Deleld reserves the right to make changes to the design or specications without prior notice.
NE MA
Plug
V/Hz/Ph
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
Printed in the U.S.A.
MSCAB3
02/08
Loading...