Delfield 500-CH User Manual

PROJECT

ITEM #

QUANTITY DATE

APPROVAL

Short Form Specifications Exterior Body;

1.00” (2.54 cm) overall thickness with (2) tempered glass panes (outer pane) 0.25” (0.64 cm), (inner pane) 0.18” (0.48 cm). Each side of glass is trimmed with black aluminum extrusion formed to match the curvature of the glass front. Base of cabinet is 18-gauge stainless steel over 14gauge galvanized steel bottom structure. Exterior top of display constructed of 18-gauge stainless steel. Exterior sides are finished with Ststainless steel. Unit is completely insulated with 1.50” (3.8 cm) polyurethane insulation. Adjustable feet allow for leveling.

Doors; Unit is provided with two tempered glass doors in a extruded aluminum frame/track. Doors are easily removable for cleaning.

Interior Cabinet is constructed of 18-gauge stainless steel top and bottom. Interior sides are constructed of 20-gauge stainless steel. Unit is provided with one permanent shelf with heat pads. Interior is lighted with two (120v-60c-1ph) incandescent lights, with separate on/off switch. Interior has three to five 12” x 20” x 6.25” (30.5 cm x

50.8 cm x 15.9 cm) deep electrically heated, recessed, die stamped food warmers.

Heated Food Warmers

Each is fully insulated on all sides and bottom, and covered with an exterior galvanized steel jacket. Each food warmer is equipped with a heating element rated at 1000/1222 watts for (208/240v/60c -1ph) service and wired to an individual control, located at rear base of unit.

Louvers are located at front and back of base for air circulation. On/off switch for entire system is located behind the access panel: Unit must be hard wired.

Note: Unit is designed for dry operation.

Front of unit is provided with curved thermopane glass of

case is

are constructed of 18-gauge stainless steel.

Heated Curved Glass Display Cases

Model 549-CH

An AutoCAD® symbols library

is available for all 500-CH models.

See listings on back

500-CH

Options and Accessories

• Aluminum colored trim strips

• Full height laminate ends and base (customer side only)

• One-way mirrored doors

• Special decorative metal laminates

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

46.37"

117.7 cm

16.03"

40.7 cm

HEATED SHELF W/ LIGHT

12" X 20" HEATED FOOD WELL W/ 120/208-230V

26.25"

66.7 cm

11.00"

27.9 cm

9.75"

24.8 cm

7.50"

19.1 cm

13.25"

33.7 cm

2.50"

6.4 cm

1.50" MARINE EDGE

7.87"

19.9 cm

RADIUS OF CURVED GLASS (15.75" O.D.)

35.00"

88.9 cm

ACCESS HOLE FOR ELECT. CONNECTION

AIR IN

AIR OUT

VENT

SLIDING

HEATED

ACCESS PANEL

RECESSED CONTROL PANEL

J-BOX BEHIND ACCESS PANEL

49.25

125.1 cm

35.00

88.9 cm

S/S TOP

15.50

39.4 cm

61.25"

155.6 cm

35.00"

88.9cm

S/S TOP

15.50

39.4 cm

73.25"

186 cm

35.00"

88.9 cm

S/S TOP

15.50

39.4 cm

Heated Curved Glass Display Cases

500-CH

Mechanical Data

NUMBER TYPE 12 X 20 WELLS (60 hz/1ph) AMPS WEIGHT 549-CH Heated 3 120/208-240v 19/21 535 lbs/243 kg

561-CH Heated 4 120/208-240v 24/27 645 lbs/293 kg

573-CH Heated 5 120/208-240v 30/34 755 lbs/344 kg

PLAN VIEW 549-CH

TYPICAL FRONT ELEVATION

ALL 500-CH MODELS

PERSPECTIVE VIEW

MODEL NUMBER OF VOLTAGE SHIP

PLAN VIEW 561-CH

9.75” (50.2cm) X 23.5” (59.7cm)

26.65” (67.7cm) X 23.5” (59.7cm)

31.75” (80.6cm) X 23.5” (59.7cm)

NOTE: ALL UNITS ARE 120/208-

PLAN VIEW 573-CH

TYPICAL END/SECTION VIEW

ALL 500-CH MODELS

CLEAR DOOR OPENING

DIMENSIONS

MODEL 549-CH

MODEL 561-CH

MODEL 573-CH

INTERIOR SHELF LENGTHS

549-CH 45.00” (114.3 CM) 561-CH 57.00” (144.8 CM) 573-CH 69.00” (175.3 CM)

240V

NOTE: AIRFLOW MUST BE

MAINTAINED TO INSURE

UNIT PERFORMANCE AND

MAINTAIN WARRANTY.

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

DS500CH 10/01