Delfa UBI-402 User Manual [ru]

Blender

Блендер

USER MANUAL

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ UBI-402/403

www.unit.ru

ENG

RUS

CONTENT

СОДЕРЖАНИЕ

ENG

PRECAUTIONARY MEASURES 4
DESCRIPTION OF THE APPLIANCE 5
OPERATION OF THE DEVICE 6

RUS

МЕРЫ ПРЕДОСТОРОЖНОСТИ 10
ОПИСАНИЕ ПРИБОРА 11
ЭКСПЛУАТАЦИЯ ПРИБОРА 12

UBI-402/403 | BLENDER | USER MANUAL

PRECAUTIONARY MEASURES

Please before operating the device,
carefully read this manual. Save manual
during the entire operating time of the
device.

• The device is intended for household use only.

• This appliance is not intended for commercial
use.

• Use the appliance under the conditions specified
in this manual.

• Do not use the appliance outdoors.

• Make sure the household power voltage matches
the voltage specified on the nameplate of the
device.

• Install the appliance on a flat and stable surface.

• Do not immerse the appliance and power cord in
water or any other liquid.

• Do not operate the appliance with wet hands or
standing barefoot on a wet floor, this may cause
electric shock.

• Do not block the ventilation holes on the casing,
this can lead to overheating and failure.

• Be careful when handling cutting blades, when
working with the device and its cleaning.

• Do not fill the flask more than the maximum
value indicated on the scale of the bulb.

• The device is designed exclusively for mixing
cocktails and crushing small ice cubes.

capabilities.

• Do not leave children alone near a working
device.

• Do not let children play with the appliance.

• Always unplug the appliance from the mains
before cleaning or when not used for a long time.

• Upon detection of damage to the appliance or
the power, cord should immediately contact the
authorized service center.

• Ensure that the power cord does not touch hot
surfaces and Central heating radiators.

• When disconnecting the appliance from the
mains supply never pull the power cord, this can
cause damage to the cord or electrical shock.
Unplug the cord from the AC outlet holding the
plug.

• Never use the appliance near hot surfaces or
open flames.

• Watch that water or any other liquid is not
trapped inside the device.

• Do not disassemble the device yourself; it may
cause failure or electric shock.

• When a fault is detected, contact the authorized
service center.

Note: The appliance is not intended for long-term

connuous use. Aer 1 minute of operaon of the
device, give it a rest for one minute.

• Never pour into the bottle hot liquids and do not
mix hot ingredients.

• The unit is not intended for grinding coffee
beans, nutmeg, chocolate, grass stems and
frozen meat products.

• The appliance is not intended for use by children
and persons with limited mental and physical

4

UBI-402/403 | BLENDER | USER MANUAL

DESCRIPTION OF THE APPLIANCE

1. Plastic bottle 600 ml.

2. Bottle cap

3. Block of blades

4. Body

5. Power button

6. Power cord with plug

7. Filter*

8. Plastic bottle 300 ml*

9. Sticks for ice cream *

10. Form for ice cream *

*-only for model UBI-403

5

UBI-402/403 | BLENDER | USER MANUAL

OPERATION OF THE DEVICE

Before the first use

Before operating the appliance, we recommend carefully clean all parts
that contact with food as described in the chapter “Care and cleaning”.

Assembly of the device

Attention! In order to avoid electric shock, connect the appliance to the mains only after you have finished it the build
and uploaded all the necessary ingredients.

1. Place the prepared ingredients into the bottle for mixing (1). Please note that

the level of ingredients does not exceed the maximum value indicated on the
scale of the bottle (Fig. 1).

2. Place a block of blades (3) on the bottle (1) and turn it clockwise to tighten it.

Make sure that the unit blades (3) are securely fastened and the o-ring tight to
the block blades and the bottle (Fig. 2).

3. Turn the bottle (1) with block of blades (3) upside down (Fig. 3).

4. Align the marking on the unit of blades (3) with marking on the body of the

blender (4) and place the block of blades (3) on the body (4) (Fig. 4).

5. Turn the bottle (1) with block of blades (3) clockwise until it stops (the direction

indicated by the arrow) (Fig. 5).

6. Disassembly of blender runs in the reverse order.

Using of device

1. Slice all ingredients into pieces of 1-2 centimeters

2. Put the ingredients into the bottle for mixing (1).

3. Assemble the unit as described in chapter “Assembly of the device”.

4. Connect the appliance with the mains.

5. Press and hold the power button (5) to switch the unit on.

6. Once the desired consistency is reached, release the power button (5). Discon­nect the appliance from the mains.

7. Remove the bottle (1) with block of blades (3) from the body of the blender (4).

8. Remove the block of the blades (3) from bottles (1).

9. You can put the cover (2) on the bottle (1) and to take her with you.

6