delem DM-103VA Specification Manual

DM-103VA

Delem

Modusys module for

Y-axes, auxiliary axis,
pressure and crowning
control.

Modularity solutions

With the Modusys DM-10x modules,
scalability and flexibility is provided
based on state of the art electronics
ready for tomorrow.

The DM-103VA module controls the
three main axes of the synchronized
press brake, Y1, Y2 and X. This module
is part of the modular concept for the
DAonWindows range.

Y1 and Y2, two fully closed-loop
controlled hydraulic axes of the press
brake, driven with the highest speed,
position and parallelism control
available on the market. Independent of
the hydraulic proportional valves used,
the control algorithms guarantee
optimum performance combined with
smooth transitions during all phases.

With its 24 I/O signals in combination
with the sequencer (PLC) functionality
the DM-103VA can optimally be
configured by the OEM-manufacturer to
meet the most complicated control
demands.

Next to this module all kind of axes can
be controlled via additional modules
offering optimal flexibility.

All Modusys modules are
interconnected by the HSB-bus. This
enables easy setup, reduces cabling
and makes a fully integrated system.

DM-103VA module featuring:

• Delem Modusys compatible

• Hydraulic closed-loop control

• Including integrated valve

amplifiers

• High frequency encoder

interfacing

• Position, speed and parallelism

control during all cycle phases

• Pressure control

• Crowning control

• Analogue inputs

• Compact footprint and encasing

E v e r y t h i n g u n d e r c o n t r o l

Technical Specifications DM-103VA

Product configuration

Standard

- Y1 - Y2 hydraulic closed-loop
control

- Position, speed and parallelism
control during all phases

- Integrated valve amplifier for
proportional valves

- Auxiliary axis control (e.g. X)

- Pressure valve control

- Crowning control

- Delem Modusys compatible

- Delem Sequencer compatible

- HSB-bus interface, RJ45-type

Ordering information

- DM-103VA

Technical specifications

DM - 10x Modusys series

General

- Robust housing

- Fast mounting

- Status and diagnostics display

Axis control

- Y1, Y2 encoder interface (5V or 12V
DC/250mA,single ended or
differential)

- Valve amplifier and +/-10V, 10mA

- Auxiliary axis encoder interface
(5V or 12V DC/250mA,single ended
or differential)

- Servo control

- Frequency inverter control

- AC 2-speed control (over digital
outputs or analogue output)

- Analogue outputs Y1, Y2 +
crowning

- Analogue pressure control

(0 .. 1,5A or 0..10V)

- Crowning analogue output / input
(pot.meter)

Input / Output specification

- 8 x digital inputs (10-28Vdc/20mA)

- 8 x programmable in/output
(output 8 x 500mA)

- 8 x digital outputs (18-28Vdc)
(4 x 500mA + 4 x 1,5A)

- All inputs are opto isolated with
common ground

- 4 x analogue input (0 - 10V, 12bit)

- Encoder input frequency: 1 MHz

Supply

- 18 - 30V DC (ripple max. +-20%)

- Power dissipation 3.5 Watt max.

- Max. 1A

Environment

- Operation temperature +5 - +50°C

- Storage temperature -10 - +70°C

- EMC according to IEC 801

- Small footprint (240 x 53 x 132mm.)

Delem

E v e r y t h i n g u n d e r c o n t r o l

Luchthavenweg 42, 5657 EB Eindhoven
T

he Netherlands

T: [phone], F: [phone]

www.delem.com