delem DM-101 Specification Manual

DM-101

Single axis Modusys
module for auxiliary
axis control

Delem

Modularity solutions

With the Modusys DM-10x modules,
scalability and flexibility is provided
based on state of the art electronics
ready for tomorrow.

The DM-101 module is a single axis
controller and part of the modular
concept for the DAonWindows range.

The control functions and settings of the
module are programmable over any
DAonWindows front-end control.
Depending a the axis control type a
machine parameter will be enough to
have all control options for servo,
frequency inverter control as well as AC
2-speed control available.

Up to a maximum of 16 modules can be
connected to the front-end control units
via the industrial bus with the sequencer
(PLC) functionality of the control.
This will give optimal scalability to suite
the machines configuration and
integrate machine control functions, and
save relays or other logics.

All Modusys modules are
interconnected by the HSB-bus. This
enables easy setup, reduces cabling
and makes a fully integrated system.

Next to this module all kind of axes can
be controlled via additional modules
offering optimal flexibility.

DM-101 module featuring:

• Servo control

• Frequency inverter control

• AC 2-speed control

• Delem Modusys compatible

• High frequency encoder

interfacing

• Analogue inputs

• Enhanced diagnostics

• Compact footprint and encasing

E v e r y t h i n g u n d e r c o n t r o l

Technical Specifications DM-101

Product configuration

Standard

- Auxiliary axis control
(e.g. X, R, Z, part support, etc.)

- Delem Modusys compatible

- Delem Sequencer compatible

- HSB-bus interface, RJ45-type

Ordering information

- DM-101

Technical specifications

DM - 10x Modusys series

General

- Robust housing

- Fast mounting

- Status and diagnostics display

- Enhanced axes analyses over
front-end control

Axis control

- Auxiliary axis encoder interface
(5V or 12V DC/250mA, single
ended or differential)

- Servo control

- Frequency inverter control

- AC 2-speed control (over digital
outputs or analogue output)

Input / Output specification

- 4 x digital inputs (10-28Vdc/20mA)

- 4 x digital outputs (18-28Vdc)
(4 x 1,5A)

- All inputs opto isolated with
common ground

- 2 x analogue input (0 - 10V, 12bit)

- Encoder input frequency: 1 MHz

Supply

- 18 - 30V DC (ripple max. +-20%)

- Power dissipation 3.5 Watt max.

- Max. 1A

Environment

- Operation temperature +5 - +50°C

- Storage temperature -10 - +70°C

- EMC according to IEC 801

- Small footprint (240 x 53 x 132mm.)

Delem

E v e r y t h i n g u n d e r c o n t r o l

Luchthavenweg 42, 5657 EB Eindhoven
T

he Netherlands

T: [phone], F: [phone]

www.delem.com