delem DA-51 Specification Manual

Compact 4-axis CNC
system for press brakes

DA-51

Everything under control

The DA-51 press brake controller offers
all basic CNC functions incl. angle
programming of the Y-axis, controlling
up to 4 axes. The front panel layout with
the bright LCD display guarantees a
very user-friendly and easy to program
controller.

For part programming it provides the
user programming space for 500
program lines where each program
can contain up to 25 bends. All bend
parameters are orderly listed on one
page. For each program there is one
extra page available to specify a.o.
tooling, material properties and stock
count.

The unique “push button page”
structure gives a direct access to
programs in memory and guarantees
quick and easy programming of a
product.

With the test bend teach-in function,
the press brake utilisation will be more
efficient due too less programming and
less test time.

The basic machine control functions are
Y1-Y2 and X axis, optionally a second
backgauge axis can be used as R/Z or
X2-axis.

DA-51 featuring:

• One page programming

• R-axis, Z-axis or X2-axis optional

• Crowning control

• Panel based housing

• Large memory base

• Tool library

• Servo, frequency inverter and
AC control

Technical Specifications DA-51

Product configuration

Technical specifications

Everything under control

Luchthavenweg 42, 5657 EB Eindhoven
The Netherlands

www.delem.com

T: [phone], F: [phone]

General

- Program number, 7 digits

- Drawing number, 20 digits alpha­numeric

- Program repeat max. 9,999

- Step number, 25 max. (sequences)

- Step repeat, 99 max.

- Millimeters / inches

- Stock counter

- Tandem operation

- Power-down memorisation

Housing

- Panel based housing

- Dimensions: 350 x 220 x 60 mm

Programming functions

- One page programming table

- Free material programming

- Free programmable tools

Computed functions

- Press force

- Crowning adjustment

- Bottoming force

Interfaces

- DNC-RS 232C, communication for
back-up and restore of parameters

Axis control Inputs / Outputs

- Servo controlled axis

- Unipolar frequency inverter control

- 2-speed axis control for AC-motors

- “Teach-in” on Y and auxiliary axes

- Function outputs, up to 5

Miscellaneous

- Diagnostic program

- Dialog messaging

- “Teach-in” on Y and auxiliary axis

- Opto-isolated I/O

Standard

- Synchronised press brake control

- Conventional press brake control

- LCD display 320 x 240 pixels

- Memory capacity:
500 programs, 25 bends per
program

- Tool library 30 punches / 30 dies

- Bend repeat, 99 max.

- Operator selectable language

Ordering information

- DA-51

- DA-51C

conventional systems

Field options

- Additional auxiliary axis

- Tandem option

- Programming key lock

Factory options

- Box type housing

Box type housing