Deep SEA Electronics DSE9476 User Manual

DEEP SEA ELECTRONICS

053-235

Pa

rameter

Specification

DSE9476: 24 V, 20 A Battery Charger

ISSUE 1

Installation Instructions

DANGER OF DEATH: LIVE PARTS exist within the DSE9476 enclosure. The

enclosure cover must not be removed.

INSTALLATION

The DSE9476 is a 24 V, 20 A battery charger which is designed to be mounted
within a control panel, utilising the integral mounting holes. The DSE9476 battery
charger is fit-and-forget. It may be permanently connected to the A.C. supply and
the load, with no requirement to disable the charger during times of heavy load
(such as engine cranking) or when in parallel with a charging alternator.

BATTERY SUITABILITY

The charger is factory set by DSE to suit Lead Acid batteries, configuration is
possible to suit other battery types using the DSE Configuraiton Suite PC
Software which is available from www.deepseaplc.com.
Care must be taken to ensure the batteries connected to the charger are of the
correct ‘technology’ to suit the setting of the charger.

INDICATIONS

The DSE9476 Battery Charger features LED indicators to show the battery
charger status.

DIMENSIONS AND MOUNTING

Case Dimensions 248 mm x 183 mm x 76 mm

(9.74 ” x 7.19 ” x 3.00 ”)
Mounting Holes
Dimensions

Suitable for M5

(0.23 ” diameter)
Mounting Hole Spacings 233 mm x 150 mm

(9.17 ” x 5.91 ”)

NOTE: The DSE9476 battery charger is designed to be mounted with the base

to a vertical surface with the terminal strips at the bottom.

NOTE: This document is intended as a ‘quick start’ guide only. For full

operating instructions and specifications, refer to DSE publication:

057-282 DSE9476 Operator Manual.

TYPICAL CONNECTION DIAGRAM

Parameter

Specification

230 V AC Input

110 V AC Input

Connection Type Screw terminal, rising clamp, no internal spring
Min Cable Size (AC Supply) 2.0 mm² (AWG 15)
Min Cable Size (Charge Output) 1.0 mm² (AWG 18)
Min Cable Size (All Other Connections) 0.5 mm² (AWG 20)
Max Cable Size (AC Supply) 3.3 mm² (AWG 12)
Max Cable Size (All Other Connections) 2.5 mm² (AWG 14)
Recommended AC Fuse

5.0 A anti-surge 10.0 A anti-surge

Deep Sea Electronics Plc.

Tel: [phone]

Fax: [phone]

Email: [e-mail]

Web: www.deepseaplc.com

Deep Sea Electronics Inc.

Phone: [phone]

Fax: [phone]

Email: [e-mail]

Web: www.deepseausa.com