053-062 ISSUE 1
DEEP SEA ELECTRONICS
DSE860 / DSE865
INSTALLATION INSTRUCTIONS
DSE860 – For connection to DSE RS232 enabled controllers.
DSE865 – For connection to DSE RS485 enabled controllers.
‘Plug and Play’ setup
The DSE860/5 must be setup before it will communicate correctly on your network.
Full setup instructions are contained within the operator manual 057-099 DSE860/DSE865 operating
instructions available from www.deepseaplc.com :
Visit www.deepseaplc.com and select DSE DOWNLOADS.
SPECIFICATION
DC SUPPLY
Nominal voltage 8V to 35V continuous DC
Protection against surges to 60V DC
Power consumption @ 12V DC - 110mA +/- 5%, app. (in 100BaseT mode)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature -30°C to +70°C
Storage Temperature -40°C to +85°C
Vibration 2g, 10-500Hz, amplitude 0.15mm, 6g desirable
Mechanical Shock N/A
Humidity 85%, relative, non-condensing, up to 85°C
DIMENSIONS
Overall size
Mounting type M36 DIN-rail
APPLICABLE CODES AND STANDARDS
DSE860/5 meets or exceeds the following standards
EMC (Emissions and Immunity):
Usage within USA and Canada UL 508, CSA 22.2, NFPA 70 / 110
86mm x 35mm x 57mm (case rear to case front)
(3.4” x 1.4” x 2.3”)
EN61000-6-2 Generic Immunity
EN61000-6-3 Generic Emissions
CONNECTION DETAILS
Deep Sea Electronics Plc.
POWER
Pin no. Description
1 DC –ve
2 DC +ve
ETHERNET
Pin no. Description
1 TX+
2 TX3 RX+
4 Do not connect
5 Do not connect
6 RX7 Do not connect
8 Do not connect
SERIAL RS232 (DSE860 ONLY)
Pin no. Description
1 Do not connect
2 RX IN
3 TX OUT
4 DTR OUT
5 Ground
6 DSR IN
7 RTS OUT
8 CTS IN
9 Do not connect
SERIAL RS485 (DSE865 ONLY)
Pin no. Description
1 Screen
2 B
3 A
21 3
Tel:+44 (0)1723 890099
Fax: +44 (0)1723 893303
LO CALL (from UK BT landlines) :
Telephone 0845 260 8933
Email: support@deepseaplc.com
Phone: +1 (815) 316-8706
Fax: +1 (815) 316- 8708
TOLL FREE (USA only) : Tel: 1 866 636 9703
Email: dsesales@deepseausa.com
Web: www.deepseausa.com
(Far East)
Tel:+66 (0) 2191 8052
Mob: +66 (0) 81805 5625
Email: support@deepseaplc.com
Web: www.deepseaplc.com