You have just acquired a DE DIETRICH fridge and we would like to thank you.
Our research teams have created this new generation of appliances for you. Their qua-lity, design, features and
technological advances make them exceptional products, andreveal our unique know-how.
Your new DE DIETRICH fridge will blend harmoniously into your kitchen and will perfectlycombine food
preservation performance and ease of use. We wanted to offer you a pro-duct of excellence.
In the DE DIETRICH product range, you will also fi nd a wide choice of hobs, ovens,microwaves, hoods,
dishwashers, cookers, freezers, that you can coordinate with yournew DE DIETRICH fridge.
Visit our website www.dedietrich-electromenager.com, where you will fi nd our latestinnovations as well as useful
and complementary information.
SI
EN
DE DIETRICH
Setting New Values
As part of our commitment to constantly improving our products, we reserve the right to make changes tothem
based on technical advances to their technical and functional features and appearance.
Warning:
Before installing and using your appliance, please carefully read this Guide to Installation and Use,which
will allow you to quickly familiarise yourself with its operation.
• The appliance is manufactured in compliance with all relevant safety standards; however, it is recommended that persons with impaired physical,
motional, or mental abilities, or persons with inadequate experience and knowledge, do not use the appliance without due supervision. The same
recommendation applies to minors using the appliance.
• Before connecting the appliance read these instructions carefully. They describe the appliance and provide instructions for its safe and correct use.
The instructions are prepared for different types and models of the appliance so they may contain descriptions of functions and components your
appliance may not have.
• These instructions also contain the NO FROST version of the freezer, fi tted with the fan and featuring automatic defrosting.
• Remove the wrapping protecting the appliance during transport.
• Wrappings contain environmentally friendly materials which can be recycled, recovered or disposed off without threat to the environment.
• Door corners are fi tted with protective spacers. Remove the spacers and replace them with the attached pegs.
• Before connecting the appliance to the mains supply, leave it in upright position for about 2 hours. This will reduce possibility of malfunctions in the
cooling system resulting from prior transport and handling.
• The appliance must be connected to the mains supply in accordance with the standing regulations and local requirements.
• The appliance must not be used in open air or exposed to weather precipitation.
• Always disconnect the appliance from power supply (pull the power cord from wall socket) before cleaning and before replacing the light bulb.
• If the power supply cord is damaged, in order to avoid hazard it must be replaced by the service or by qualifi ed personnel.
• In case of longer disuse fi rst turn the appliance off with the ON/OFF button and disconnect it from mains supply. Empty the appliance, clean the
interior and leave the door ajar.
• For the protection of environment deliver the obsolete appliance to the authorized scrap appliance dealers.
• Never let the children play with the appliance.
• Self closing shear door hinge pulls the door to the cabinet just before closing, thereby preventing the door to remain ajar. Equally it limits the door
opening angle and prevents damage to adjacent elements.
• Rating plate with basic information is located in the interior of the appliance. If the sticker plate is not suitable for your language, replace it with the
attached one.
• Warning: Ventilation slots on the appliance or built-in element should always be kept clean and unobstructed.
• Warning: Do not use any mechanical accessories when thawing the refrigerator, except for those explicitly recommended by the manufacturer.
• Warning: To prevent any pollution be careful not to damage the insulation or refrigeration tubes at the rear wall during the installation, cleaning and
disposal of the appliance.
• Warning: Do not use any electrical devices inside the appliance, except for those explicitly recommended by the manufacturer.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of thisproduct. For more detailed information about recycling of this product, please
contact your local city offi ce, your household waste disposal service or the shop where you purchased the product.
Description of the appliance
Interior equipment of the appliance will typically vary according to the specifi c model.
9 FRESH ZONE pan
10 Vegetable crisp pan
11 Refrigerator door pans
(options: deep, shallow; covered or no cover)
12 Door bottle rack with safety holder
B Freezer
13 Storage compartment
14 Freezing compartment
15 Legs
Selecting the locationSelecting the location
Positioning the
Positioning the
appliance
appliance
• Place the appliance in dry and well aired room. The appliance operates best at temperature ranges indicated in
the chart below. Relevant class of the appliance is indicated on the rating plate.
ClassAmbient temperature
SN (subnormal)from + 10°C to + 32°C
N (normal)from + 16°C to + 32°C
ST (subtropical)from + 16°C to + 38°C
T (tropical)from + 16°C to + 43°C
Positioning the appliance requires two persons in order to avoid injuries or damage to the appliance.
• Place the appliance fl atly and fi rmly on a solid base. The appliance is fi tted with adjustable feet on the front side,
used to level the appliance (certain models only).
• Avoid exposing the appliance to direct sunlight or heat sources. If this is not feasible, install insulation plate
between the appliance and adjacent heat source.
• The appliance may stand independently or you may incorporate it into the kitchen cabinet. Be sure to leave
enough space for cooling of condenser (distance from the wall or the opening should be 200 cm
the cabinet above the appliance should be at least 5 cm.
After the installation, the appliance mains plug should be accessible!
• The appliance is fi tted with spacers to be mounted on the top edge of the condenser. They prevent the rear
of the appliance to be pushed too close to the wall. Spacers are fabricated universally regarding the different
distance of the condenser from the cabinet, so make sure to position them properly.
Connecting to power
Connecting to power
supply
supply
• Use the power cord to connect the appliance to the mains power. Wall outlet must be fi tted with ground terminal
(safety socket). Required nominal voltage and frequency are indicated on the relevant label or rating plate of the
appliance.
• Mains power connection and grounding must be made in line with standing regulations and local requirements.
The appliance is able to accommodate minor temporary voltage tolerances, but they may not exceed -10% to +6%.
Changing the Direction of Opening the Door
Freestanding
appliance
Necessary tools: ring spanner No.8, screwdriver, torque 25
Tilt the appliance so that the bottom hinge can be unscrewed and proceed with disassembling as shown in the
Figure 3. Then fi x the assembly parts again in the opposite turn. Use the attached opposite hinge insert piece.
Use the bungs, which have been pulled out, on the opposite side. Check the door seal. In case that it does not
rest well, take it off and turn it by 180°.