Page 1
400RR
COD.
EN
OTHER CHARACTERISTICS
613300 18NET
IN COMPLIANCE
WITH STANDARDS
1800 kg
• • •
NET230N •
- Self locking with limit switches
- Speed adjustment and slow down in opening and closing
- Motor control by encoder and obstacle detection
613301
18NET/M
IN COMPLIANCE
WITH STANDARDS
1800 kg
• • •
NET230N •
- Self locking
-
Magnetic limit switches
- Speed adjustment and slow down in opening and closing
- Motor control by encoder and obstacle detection
COD.
EN
OTHER CHARACTERISTICS
613210 25RRT
IN COMPLIANCE
WITH STANDARDS
2500 kg
• • •
400RR •
- Self locking with limit switches
- Anti-crushing safety device
- Speed adjustment and slow down in opening and closing
- Motor control by encoder and obstacle detection
- Anti-inertia braking device (version 25RRTF only)
613215
25RRTF
IN COMPLIANCE
WITH STANDARDS
2500 kg
• • •
400RR •
613221
25RRT/M
IN COMPLIANCE
WITH STANDARDS
2500 kg
• • •
400RR •
- Self locking
- Speed adjustment and slow down in opening and closing
- Motor control by encoder and obstacle detection
- Magnetic limit switches
NET230N
230V a.c. operators with control board, limit switches and encoder
400V a.c. operators with control board, limit switches and encoder
Automations for industrial sliding gates
GULLIVER
COD. OTHER CHARACTERISTICS
613220* 1503E 1500 kg
• •
212E
- Self locking with limit switches
- Electronic force adjustment
- Automatic working time learning
- Controlled input for external safety device
212E 230V a.c. operators with control board and limit switches
TECHNICAL INFO 25RRT - 25RRTF - 25RRT/M - 25RRT/IB 18NET - 18NET/M - 18NET/IB - 1503E
Motor power supply (V) 400 AC ± 10 % (50/60 Hz) 230 AC ± 10 % (50/60 Hz)
Maximum power absorption (W) 1200 560
Max thrust (N) 1650 875
Duty cycle (cycles/hours) 17 - with a 14 mt. gate 15 - with a 12 mt. gate
N. max cycles in 24h. 280 240
Built-in capacitor (μF) / 30
Operating temperature (°C) -20 ÷ 50 -20 ÷ 50
Motor thermal protection (°C) / 140
Speed (m/min) 10 10
Weight with packing (Kg) 30 30
Protection degree IP34 (IP44 with magnetic limit switch) IP34 (IP44 with magnetic limit switch)
IN COMPLIANCE
WITH STANDARDS
* In order to respect the limit of impact forces foreseen by EN 12453 and EN12445 , you must use the external safety devices in compliance with EN 12978.
All models have: foundation plate (to be cemented) included
All models have: foundation plate (to be cemented) included
34
Page 2
Cod. 668010
Art. 127
Warning sign
Cod. 672580
Art. TR2
Remote control
Black version art. TR2N also
available (page 118)
EXAMPLE OF A TYPICAL INSTALLATION
ELECTRICAL DIAGRAM
A
4x1 mm² (230V) o 3x1,5 mm² (24V ) - 6 x 0,5 mm²
4x0,5 mm²
2 x 0,5 mm² - RG58
2x0,5 mm²
4x0,5 mm²
2x0,5 mm²
3x0,5 mm²
2x0,5 mm²
B
240
120
410
330
115
DIMENSIONS
2
deasy stem.co m
35
SLIDING GATES
Cod. 662030
Art. 104LUX
Pair of adjustable (15°) surface
mounted photocells
3
Cod. 664000
Art. PILLY/60
Pair of aluminium columns for photocells,
height 55 cm.
4
Cod. 661062
Art. LED230AI
Led flashing light 230V with
built-in antenna 433Mhz
7
Cod. 171001
Art. 123
Mechanical safety rib, length 200 cm.
5
Cod. 663030
Art. 102LUX
Keyswitch with two contacts, flush
mounted. Supplied with 2 keys.
6
Cod. 126001
Art. 112
Galvanized steel rack
22 x 22 mm (per mt.)
2
1
4
5
3 3
3
4
3
6
7
Cod. 613300
Art. 18NET
Operator for industrial
sliding gates
1
Page 3
Cod. 619000
Art. 111
NYLON rack, with fixing
screws (per mt.)
Cod. 126008
Art. 116
Galvanized steel
M6 rack, (per mt.)
Cod. 675580
Art. RADIOBAND RU
868Mhz receiver
Cod. 171000
Art. 124
Mechanical safety rib, 1,5 mt.
Cod. 661062
Art. LED230AI
Led flashing light 230V with
built-in antenna 433Mhz
Cod.677130
Art. 400RR
Digital control board three-phase 400V
or single phase 230V for sliding gates
Cod. 662020
Art. 104MINILUX
Pair of surface mounted photocells.
Range 20 mt
Cod. 662043
Art. LINEAR/B
Pair of adjustable photocells (180°)
with tx supplied by a LiOn battery.
Range 7/15 Mt
Cod. 663280
Art. DIGIRAD
Wireless keypad
Cod. 664000
Art. PILLY/60
Pair of aluminium columns for photocells,
height 55 cm.
Cod. 126001
Art. 112
Galvanized steel rack
22 x 22 mm (per mt.)
Cod.360580
Art. M6
M6 Gulliver galvanized gear
M=6 Z=12 Øe=84
Cod. 171001
Art. 123
Mechanical safety rib, 2 mt.
Cod. 171029
Art. 125N
Resistive safety rib, 2,5 mt.,
according to EN12978
Cod. 677600
Art. NET230N
Universal digital control board for 1 or 2
operators, 230V, with or without magnetic
encoder
Cod. 672580
Art. TR2
Remote control
Black version art. TR2N also available
(page 118)
Cod. 662030
Art. 104LUX
Pair of adjustable (15°) surface
mounted photocells
Cod. 681060
Art. COVER
Vandal-proof aluminium cover for
art. LINEAR and LINEAR/B
Cod. 663270
Art. DIGINET
Hardwired keypad for BUS connections
to MASTER devices of range DE@NET
(NET24N, NET230N, MASTERNET)
Cod. 664010
Art. PILLY/120
Pair of aluminium columns for photocells,
height 100 cm.
Cod. 126000
Art. 113
Galvanized steel rack 30x12 mm
with zinc-plated spacers and fixing
screws (per mt.)
Cod. 672900
Art. RADIOBAND TBX
868Mhz transmitter
Cod. 171028
Art. 123N
Resistive safety rib, 2 mt.,
according to EN12978
35
50
Cod. 667053
Art. Soft3
Safety rubber profile (complete with aluminium
base) useful to reduce the impact forces for
sliding and swing gates. 12mt.
Cod. 677110
Art. 212E
Control board for 1 or
2 operators, 230V
Cod. 672590
Art. TR4
Remote control
Black version art. TR4N also available
(page 118)
Cod. 662044
Art. LINEAR
Pair of adjustable photocells (180°)
with possibility of syncronized operating.
Range 20 Mt
Cod. 663060
Art. KYO
Aluminium vandal-proof
keyswitch, flush mounted.
Cod. 664020
Art. PILLY/base
Pair of fixing plates for columns
to be cemented.
Cod. 675510
Art. 251/2
Hardwired 2 channels receiver, surface
mounted (complete with box 100F)
(433Mhz)
SPECIFIC ACCESSORIES
OTHER ACCESSORIES
Steel vandal-proof box for REV and GULLIVER with magnetic limit
switches and foundation plate
IRON BOX
For technical details see on page 38
COD. ART. DIMENSIONS
619080 IRONBOX 580 x 280 x 902h 44 Kg
36
Loading...