TRS Cable Connection
XLR Cable Connection
CT2 Quick Start
1. Install a 9 Volt battery (sold separately) in the bottom of the
2. Connect a cable to test (see diagram on right).
3. Turn the knob to select the cable pin to test (see screening on
Product Registration
Register your product at http://dbxpro.com/en-US/
support/warranty_registration or scan the code to
the right with a QR scanner app on your mobile
device to go straight to web URL.
Download The Owner’s Manual
Get the owner’s manual at http://dbxpro.com/
en-US/products/ct-2#documentation or scan the
code to the right with a QR scanner app on your
mobile device to go straight to web URL.
CT2 chassis. Turn the knob to the BATTERY CHECK position
to test the battery.
NOTE: When testing a cable with banana connectors, the
yellow LED will light and a test tone will be audible if the cable
passes continuity.
chassis for PIN reference). The LED pair for the selected pin
will light if the cable passes. If an LED for an unselected PIN
lights, this indicates a short is made between the selected and
indicated PIN.
DIN Cable Connection
DMX/5-Pin Cable Connection
BNC Cable Connection
Phono Cable Connection
Banana Cable Connection
Speaker Twist Cable Connection
Rev A
Loading...