
Spec Sheet
CONTROL 8
Master Control Unit for DVA Network Software
Applications
- Live sound for rental application
- Portable PA, ballrooms, live theatre
- Fixed installations in clubs, theatres, house
of worship and corporate A/V applications
Features
- Hardware interface for RDNet devices with
standard EIA RS-485
- Up to 8 subnet managed with max. 32
devices for each subnet (256 total devices)
- Network connections through RJ45-RJ45
CAT-5 cables or XLR-XLR balanced audio
cables (as alternative to RJ-45)
- PC connection through Ethernet (remote) or
USB (local) sockets
- DVA NETWORK software to manage in realtime parameters like output level, mute,
equalization, delay, etc.
Description
CONTROL 8 is a hardware interface for
connecting devices compatible with
dBTechnologies RDNET system (e.g. DVA T12,
DVA T8, DVA S30N, etc.) to a personal computer
through an Ethernet or USB connection.
The RDNET system uses a proprietary serial
protocol especially developed to create a data
network, which can remotely manage up to 256
compatible devices.
The CONTROL 8 manages up to 8 subnets.
Each subnet handles up to 32 devices. So it
is possible to control the maximum number
of devices managed by this protocol (256)
connected with RJ45-RJ45 cables or XLR-XLR
balanced audio cables. The addressing of
each device is automatically handled by the
CONTROL 8 interface during the power-on
procedure of the network.
The operation of the network is managed by
DVA NETWORK application (for Windows®
operating systems) and allows you to check
the operating of each device connected to the
network (VU-meter, temperatures, logistic
status, etc.) and edit its parameters, output
level, mute, equalization, delay, etc. The
conguration of the entire network and each
device can be saved as a single le in the PC or
in a SD card and later recalled.
The RDNET is a “real-time” system, meaning
that all information related to the functioning
of each device is acquired in real-time, a
function to constantly monitor all components
of the sound system during performance.
The rear panel includes 8 pairs of RJ-45 / XLR
connectors (one pairs for each subnet), an
Ethernet port for connecting to the PC and a
Powercon™ mains socket. On the front panel
there is an SD card reader through which the
user can store and recall any conguration le,
and a USB port for direct connection to PC (only
for short distance; in the case of long distance
you’ll better use the Ethernet port provided on
the rear panel).
Network setup
Page 1 of 2
USB / ETHERNET
L
I
N
K
2
L
I
N
K
1
C
H
4
C
H
3
C
H
2
C
H
1
RDNET CONTROL 8
AUDIO
PC
EIA RS-485
L
I
N
K
4
L
I
N
K
3
R
E
C
H
8
C
H
7
C
H
6
C
H
5
R
E
I
B
S
U
W
O
P
0
8
L
O
R
T
N
O
C
R
O
R
R
E
D
A
E
R
D
R
A
C
SUBNET 2
DEVICES
(max. 32
per subnet)
SUBNET 1
SUBNET 3
SUBNET 4
SUBNET 5
SUBNET 6
SUBNET 7
SUBNET 8
rev.1.1 - 2015

CONTROL 8
Technical Specications
Network specications
Network standard EIA RS- 485
up to 8 managed subnet
max. 32 devices connected to each subnet
RDNet connections 8x RJ 45 connectors (EtherCon) for CAT 5 cable
8x XLR socket (as alternative to RJ 45)
PC connection local USB (B type socket)
remote Ethernet (RJ 45), alternative to USB
Power supply operating voltage: 100 ÷ 240 V ac (full range), 50 - 60 Hz
Consumption < 15 W
Mains connector Powercon™ (blue)
Mechanics
Chassis material pre-galvanized steel and painted
Dimensions (WxHxD) 482 x 44 x 182 mm (one 19” rack unit)
Net weight 2 kg - 4.4 lbs.
Front & Rear Panel
(automatic selection)
PUSH
ETH
Overall Dimensions
PUSH PUSH
PUSH
PUSH
PUSH
PUSH
PUSH PUSH
PUSH
PUSH
PUSH
PUSH
PUSH
PUSH
PUSH
[16.93]
430
[7.16]
182
TOP
All dimensions in mm [inch]
[18.98]
482
[1.73]
44
Page 2 of 2
FRONT
info@dbtechnologies.com www.dbtechnologies.com
dBTechnologies produc ts are continually improved . All spe cic atio ns are the refore subjec t to change without notice.
rev.1.1 - 2015