DB Technologies OPERA Reevo 210 Aktivbox, 2x10''/1'', OPERA Reevo 212 Aktivbox, 2x12''/1'' Quickstart Guide [EN]

OPERA REEVO 420120426Q REV1.0

QUICK START USER MANUAL SECTION 1

DIMENSIONS

H

D

PACKAGE CONTENTS

The box contains:

• n.1 OPERA REEVO speaker

• n.1 mains cable

• n.1 transport cover

• This quick start and warranty documentation

MAIN FEATURES

• Unique design

• Impressive sound pressure

• Compact size

• Quick installation

• Multiple configuration options

DESCRIPTION

OPERA REEVO is the new active speaker series
designed for small live contests. The acoustic design
combines coaxial mid-high driver with neodymium
woofers and delivers very high SPL in a compact size
thanks to the powerful Digipro amplifier. The series
consists in two models, OPERA REEVO 210 (10”
neodymium woofer) and OPERA REEVO 212 (12”
neodymium woofer), that can be easily adapted to
multiple situations thanks to the different possible
mounting configurations. The DSP on board allows
quick equalization between different presets.

OPERA REEVO

212

W 345mm 300mm

H 690mm 604mm

W

Speaker Type

Frequency Respon­se [-6dB]

Usable Bandwith
[-10dB]

Max SPL (1 m) 133 dB 132.5 dB

Directivity (HxV) 100° x 80° 100° x 90°

HF 1 - 1.75” v.c. 1 - 1.75” v.c.

LF

Crossover Fre­quency

Amplifier Digipro G2 1050 W RMS Class-D

Power Supply VDE

Cooling Passive (convenction)

Operating Range 220-240V~ (50-60Hz)/110-120V~ (50-60 Hz)

Limiter Peak, RMS, Thermal

Processing FIR Linear Phase Filters

Controller 28/56 bit DSP

AD/DA Converter 24 bit/48 kHz

Controls

Signal Input 1 x combo XLR/jack balanced

Quasi 3-Ways Active
Loudspeaker

52 Hz - 19.2 kHz 60 Hz - 19.2 kHz

48 Hz - 20 kHz 54 Hz - 20 kHz

2x 12” neodymium,

2.5” v.c.

1260 Hz - 24 dB/oct 1260 Hz - 24 dB/oct

1x Level knob
1x Preset button
2x System LED
2x Preset LED

D 376mm 324mm

OPERA REEVO

210

Quasi 3-Ways Active
Loudspeaker

2x 10” neodymium,

2.5” v.c

Signal Output 1x XLR balanced

Housing Polypropylene with external supports

Pole mount 36mm

Rigging Points 3 (M10)

Dimensions
(WxHxD)

Weight 20.4 Kg (45 lbs.) 17.2 Kg (38 lbs.)

345x690x376 mm
(13.6x27.2x14.8 in)

300x604x324 mm
(11.8x23.8x12.8 in)

1 [e-mail]

OPERA REEVO 420120426Q REV1.0

QUICK START USER MANUAL SECTION 1

1

I/O and Control panel

The amplifier of OPERA REEVO is controlled by a state­of-the-art DSP. All the connections and controls are in
the amplifier control panel.

1- Balanced audio input

6

5

2

3

2- Status LEDs (Limiter, Signal)
3- Level knob
4- Link output
5- Presets button
6- Presets LED
7- Mains input
8- Mains fuse
9- On/Off switch

4

Setup, turn on and I/O settings

Connect first the audio source to the Balanced Input
(1) using an XLR or jack TRS balanced cable. Use Link
Output (4) to connect other speakers in daisy chain.
Connect the included VDE mains cable to the mains in­put (7) and push the On/Off switch (9) to power up the
speaker. Adjust the audio level and choose the equali­zation preset (5) depending on the application.

9

This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

Serial N.

POWER

ON

OFF

 CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

 ATTENTION

RISQUE DE CHOCH ELECTRIQUE

NE PAS OUVRIR

220-240V~ 50-60Hz 1.3A
(T3.15 L 250V~)

110-120V~ 50-60Hz 2.6A
(T6.3A L 250V~)

Internal voltage setup

(REPLACE FUSE WITH SAME RATINGS)
(REMPLACER LE FUSIBLE AVEC LE MÊME TYPE)

MAINS INPUT

FUSE

AEB INDUSTRIALE S.R.L.

Via Brodolini, 8
Località Crespellano
40053 VALSAMOGGIA (BO)
ITALY

7

8

POWER SUPPLY SPECIFICATIONS (POWER ABSORPTION)

Draw at 1/8 of full power in average use conditions (*): 1.6 A (220-240V~) - 2.6 A (100-120V~)

Draw at 1/3 of full power in average use conditions (**): 3.1 A (220-240V~) - 5.2 A (100-120V~)

Power absorption with speaker turned on without signal (idle): 31 W (220-240V~) - 31 W (100-120V~)

*INSTALLER NOTES: The values refer to 1/8 of full power, in average operating conditions (music program with infrequent or no clipping). It is recommended to consi-

der them the minimum sizing values, for any type of conguration.

**INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation of the limiter. We recom­mend sizing according to these values in case of professional installations and tours.

HANDLES

OPERA REEVO are equipped with two handles for
easy transport (A).

MECHANICAL FIXING POINT

OPERA REEVO can be installed in different configurations. On the
top and on the back (B) the user can find mechanical fixing points
for flyable use; the loudspeakers are equipped with a pole mount
on the bottom (C).

A

B

B

A

C

B

2 [e-mail]

OPERA REEVO 420120426Q REV1.0

QUICK START USER MANUAL SECTION 1

CONFIGURATIONS

STAND/POLE

(Ø36mm)

STACKED

WEDGE

FLOWN

EYEBOLTS

(M10)

IMPORTANT NOTES AND WARNINGS

EMI CLASSIFICATION

According to the standards EN 55032 and 55035 this is a Class A equipment, designed and suitable to operate for profes­sional use.
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause
radio interference

FCC CLASS A STATEMENT

Any changes or modications not expressly approved by the party responsible for compliance could void the user’s autho­rity to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a resi­dential area is likely to cause harmful interference in which case the user will be required to correct the interference at his

own expense.

WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages
to persons or properties. For safety reasons do not place one loudspeaker on top of another without proper fastening
systems. Before hanging the loudspeaker check all the components for damages, deformations, missing or damaged parts
that may compromise safety during installation. If you use the loudspeakers outdoor avoid spots exposed to bad wea­ther conditions. Contact dBTechnologies for accessories to be used with the speakers. dBTechnologies will not accept any
responsibility for damages caused by inappropiate accessories or additional devices.

Features, specication and appearance of products are subject to change without notice.

dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any

obligation to change or improve products previously manufactured.

3 [e-mail]

OPERA REEVO 420120426Q REV1.0

IMPORTANT SAFETY INSTRUCIONS

1.Read these instructions

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)

that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wi­der than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the

obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11.Only use attachments/accessories specied by the manufacturer.

12.Use only with the cart, stand tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a

cart is used, use caution, when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus the

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

QUICK START USER MANUAL SECTION 1

ADDITIONAL SAFETY INSTRUCTIONS

• No naked ame sources, such as lighted candles, should be placed on the apparatus

• Do not use the apparatus in tropical climates

WARNINGS!

Only expert personnel may use the product and its accessories! To prevent hazards to people, animals and/or objects,

make sure that the installation is stable and secure. Comply with the safety regulations and laws in force in the country in
which you use the product. For safe use, periodically check that all parts are in good working condition before use. Only

authorised personnel may carry out design, calculations, installation, testing and maintenance of professional own or

stacked audio systems. AEB Industriale shall not be liable for improper installation carried out without adequate safety
measures.

Never suspend the speakers from the handles! Only use the accessories and congurations described in this manual, and

proceed in accordance with the instructions given in the manuals for the accessories.

Do not obstruct the amplier cooling ns at the back. In the event of overheating, the audio volume is gradually reduced

until the module is thermally stable. The level is automatically restored on reaching the correct operating temperature.

Do not attempt to open the amplier.

In the event of malfunction, immediately turn off the power, disconnect the unit from the mains and contact an authori­sed service centre.

Only use the power cable provided.

Do not use the monitor for a prolonged period with the limiter LED steadily lit or ashing as this indicates operation un­der stress with excessive distortion.

Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installa-

tion. User should never apply a load that exceeds the working load limits of any rigging components or equipment here

presented. Design, calculation, installation, testing and maintanance of suspension and stack systems for audio equipment

must be performed only by qualied and authorized personnel. AEB Industriale s.r.l. denies any and all responsibility for

improper installations, in the absence of safety requirements.

Scan with your
QR Reader App
to download the
complete User

Manual.

A.E.B. Industriale Srl

Via Brodolini, 8

Località Crespellano

40053 VALSAMOGGIA

BOLOGNA (ITALIA)

Tel. [phone]

Fax [phone]

www.dbtechnologies.com

[e-mail]

4 [e-mail]