DaySequerra M4FM-HD User Manual

FM - HD

Modulation Monitor

M4FM-HD User Manual

Welcome

Thanks for purchasing the DaySequerra M4FM-HD FM Modulation Monitor. We design and build all of our DaySequerra products to be completely reliable and easy to use, so you can concentrate on producing great sounding broadcasts, not struggling with complicated equipment or difficult to use product manuals.

While the M4FM-HD has been designed to be straightforward to use, we do suggest that you spend a few minutes familiarizing yourself with the features and operational functions that are contained in this manual.

DaySequerra has been building broadcast quality products since 1989. The technology developed for the M4FM-HD, and all of our products, has evolved through a process of user feedback, extensive listening, field-testing and careful refinement.

In the event that you encounter any technical or operational difficulties with this or any DaySequerra product, please feel free to contact us at 856-719-9900. Our office hours are from 9 to 5 ET, Monday through Friday. Or you can email your questions to: [e-mail].

Also, please remember to visit our website www.daysequerra.com for warranty registration and the latest DaySequerra product information.

We have worked hard to ensure that your DaySequerra M4FM-HD HD Radio Receiver will reliably serve as a flawless link between the transmitter and your monitoring facility, or as the primary broadcast reference source in your studio.

We sincerely hope our products help you achieve a new level of excellence in your work!

David V. Day

and the DaySequerra Team

2"

M4FM-HD User Manual

Table of Contents

Important Safety Information	4
Service Information	4
Introduction	5
M4FM-HD Key Features	6
M4FM-HD Technical Specifications	7
Unpacking and Installing	8
Operating Description - Controls and Indicators	9
Front Panel	9
Rear Panel	10
LCD Display	11
Modulation Measurements	12
System Menu	14
WebServer	20
Restore Factory Settings	26
Three Year Warranty	28

M4FM-HD – Features

• Analog FM plus HD RadioTM – Complete monitoring of HD Radio

FM broadcasts including FM multicast channels HD-2 through HD-8: user-

selectable tuningµSec desteps and analog FM 50/75 -emphasis.

•Frequency-Agile RF Input – Synthesized FM preselector provides -50 dB quieting sensitivity < 30 dBf (-90 dBm)

•Built-in RF Attenuator – 30 dB for wide RF input range of <0.5 vRMS to 7 vRMS

•Worldwide Capable – Complete with user-selectable 100 or 200 kHz tuning steps and 50 or 75 µSec de-emphasis

•Simultaneous Modulation Measurements – Total, pilot, L, R, L+R and L-R, and all Composite-SCA level measurements with better than 1.0% accuracy

•Superb Audio Performance – +4 dBm @ 100% modulation with SNR > 75 dB and THD < 0.1%; full-time AES-3 digital audio output as well as a highperformance headphone output with greater than 1W into 8-ohm

•Email Alerts and Rear Panel Alarm Tallies – For loss of Audio, Carrier and RDS/RBDS; remote reset via rear panel GPI

All rights reserved DaySequerra Corp. Copyright 2009.

All logos and trademark used herein are the property of their respective owners. Specifications subject to change.

M4FM-HD

!!!!!!!M4FM-HD User Manual 3"

Important Safety Information

•Indoor use only. Not for use in wet or damp environments.

•Maximum Relative Humidity: <80%

•Class I Equipment (grounded type)

•Electrical rating: 100-120/220-240V~50-60Hz 18W

•Fuse Rating: 2A 250V 20MM

•AC Mains supply voltage fluctuations are not to exceed +10% of the nominal voltage

•Operations temperature range -40°C to 70°C

•Maximum altitude: 3000m (9843ft)

•Equipment suitable for continuous operation

•Weight: 5.4kg (12lbs) equipment only; 8.2kg (18lbs) shipping

Important Note: Please connect your M4FM-HD to an uninterruptible power supply (UPS) to provide other protection against power surges and brownouts.

Service Information

The DaySequerra M4FM-HD contains no user serviceable components inside the unit. Please contact DaySequerra for repair and upgrade information. In the event that your unit needs to be returned to the factory, contact us for a return authorization number. The monitor ID and firmware version is momentarily displayed at start-up for your convenience. Please visit www.daysequerra.com and register your new M4FM-HD so we can keep you informed of the latest hardware and software updates.

4"

M4FM-HD User Manual

Introduction

DaySequerra’s M4FM-HD is the most powerful and cost-effective FM analog radio modulation monitor available today. Using a state-of-the-art Texas Instruments® DSP running at 350 MHz, all of the M4FMHD processing takes place in the digital domain.

The M4FM-HD’s Texas Instruments® DSP provides superb analog audio performance (SNR > 75 dB and THD < 0.1%) as well as simultaneous total, pilot, L, R, L+R and L-R, and all Composite-SCA modulation level measurements with better than 1.0% accuracy. The M4FM-HD also provides decoded RDS/RBDS data.

In addition to its accuracy and features, the M4FM-HD gives you audiophile grade Class-A biased audio outputs at +4 dBm on XLR connectors, so you can monitor and adjust your processing. In addition to L and R analog outputs, the M4FM-HD has a full-time AES-3 digital audio output, so you can feed your AES monitoring chain, and a high-performance headphone output with greater than 1W into 8-ohm for an uncompromised, convenient audio monitor.

The M4FM-HD rear panel has an FM composite output, as well as a GPIO port that provides optoisolated reset input and relay-contact closure alarm outputs for loss of audio, carrier and RBDS. You can control and monitor the M4FM-HD from anywhere in your plant via the M4FM-HD’s integrated webserver, which is fully compatible with most web browsers and operating systems. The M4FM-HD’s Remote Dashboard provides complete remote control monitoring, 50 station scanning, logging and alarm status; it delivers simultaneous total, pilot, L, R, L+R and L-R, all MPX-SCA modulation level measurements and decoded RDS/RBDS data. The M4FM-HD will send alerts to your phone; and you can reset the M4FM-HD remotely as well.

Your M4FM-HD is HD Radio ReadyTM meaning it can be fully upgraded at any time to provide complete HD Radio® capability. With our Factory-Direct Upgrade program, you can be sure that your investment in a DaySequerra M4FM-HD will continue to pay off well into the future.

Please read this manual thoroughly before operating your M4FM-HD.

!!!!!!!M4FM-HD User Manual 5"

M4FM-HD Key Features

•Analog FM plus HD RadioTM – Complete monitoring of HD Radio FM broadcasts including FM multicast channels HD-2 through HD-8: user-selectable tuning steps and analog FM 50/75

µSec de -emphasis.

•Bright LCD front panel display of Station, presets, RBDS with network and alarm conditions

•Frequency-Agile RF Input – Synthesized FM preselector provides -50 dB quieting sensitivity < 30 dBf (-90 dBm)

•Built-in RF Attenuator – 30 dB for wide RF input range of <0.5 vRMS to 7 vRMS

•Worldwide Capable – Complete with user-selectable 100 or 200 kHz tuning steps and 50 or 75 µSec de-emphasis

•Simultaneous Modulation Measurements – Total, pilot, L, R, L+R and L-R, and all Composite-SCA level measurements with better than 1.0% accuracy

•Superb Audio Performance – +4 dBm @ 100% modulation with SNR > 75 dB and THD < 0.1%; full-time AES-3 digital audio output as well as a high-performance headphone output with greater than 1W into 8-ohm

•Email Alerts and Rear Panel Alarm Tallies – For loss of Audio, Carrier and RDS/RBDS; remote reset via rear panel GPI

•Remote Dashboard providing total remote control, display and remote reset from any browser including

•25 Webserver and 50 tuner presets with RBDS, network and alarm conditions

•Audio level, digital audio quality and carrier quality indications

•Complete remote firmware upgrade – tolerant of high-latency networks

•FRONT PANEL ALARM LED – Indicates active alarm condition

•PROGRAMMABLE STATUS ALARMS – alarm outputs for loss of audio program, carrier, pilot and RBDS as well as audio peak, all with programmable settings for level and duration

•High performance Headphone Monitor delivering greater than 1W into 8-ohm

•Webserver compatible with any browser on your Ethernet network

•Alarms can be emailed to your phone

•Remote reset via WebServer

•Use your Wireless Router for remote control using your Android® or iPhone® mobile device

6"

M4FM-HD User Manual

M4FM-HD Technical Specifications

	Frequency Range	FM: 87.5 MHz to 107.9 MHz in 100 or 200 KHz increments
	RF Input Range	0.5 vRMS to 7 vRMS on 75-ohm F-type connector
	Sensitivity	< 30 dBf (-90 dBm) for -50 dB Quieting
	Modulation Frequency	30 Hz – 100 KHz
	Frequency Deviation	±75 KHz for 100% Modulation
	Frequency Deviation Indication	0 to 150% Deviation
	Frequency Deviation Indication	±1.0% @ 0% to 150% Deviation
	Accuracy
		Frequency Response	< ± 0.25 dB
	Composite Signal Output	THD (IEEE 185)	< 0.1%
		IMD (SMPTE)	< 0.1%
		SNR (IEEE 185)	< 75 dB
	Channel Separation (L/R and R/L)	> 45 dB, 30 Hz to 15 KHz
	Crosstalk (L+R) to (L-R) to (L+R)	> 45 dB, 30 Hz to 15 KHz
	Pilot Carrier Measurement	<± 0.50% @ 0% to 15% Injection Level
	Accuracy at all Modulation Levels	<±1.0% @ 0% to 100% Modulation
		Frequency Response	< ± 0.25 dB
		De-Emphasis µS	User Selected 50 or 75
	Audio Output	THD (IEEE 185)	< 0.1%
		IMD (SMPTE)	< 0.1%
		SNR (IEEE 185)	> 75 dB
	Power	40 W, Auto-sensing
		90-264 VAC, 50/60 Hz
		Operating Temperature: +41 to +105 F (+5 to +40 C) Storage
	Environmental	Temperature: -13 to +140 F (-25 to +60 C) Relative Humidity:
		Maximum 85%, non-condensing
	Dimensions	17.3” W x 1.7” H x 16.875” D
	Shipping Weight	12 lbs. (5.4 kg)
	Warranty	Three years, limited parts and labor

!!!!!!!M4FM-HD User Manual 7"

Unpacking and Installing the M4FM-HD

Immediately upon receiving your M4FM-HD, please make a careful inspection for any shipping damage. If damage is found or suspected, please notify the carrier at once and then contact your dealer. The DaySequerra M4FM-HD is shipped in one carton, which contains: the M4FM-HD unit, and an AC power cable.

We strongly encourage you to save the shipping carton and shipping materials supplied with your M4FM-HD. They are specially designed to properly protect your M4FM-HD, and in the event that you need to return it for service, only these OEM shipping materials can ensure its safe return to our factory.

We provide a limited 3-year warranty on all of our products, but if you don’t register your unit, it’s hard for us to contact you when software updates become available. So please take a few minutes to complete the warranty registration form on our web site, www.daysequerra.com. Thank you!

Rack Mount Installation. The M4FM-HD chassis has four rack mounting holes in its chassis and has been designed to fit in a 19” standard 1RU space. Plastic ‘finishing’ washers are recommended to protect the painted finish around the mounting holes.

Power Connection. The AC power cable supplied with the M4FM-HD must be connected from the M4FM-HD’s IEC320 power entry module to an AC mains outlet with a functional earth ground connection. The M4FM-HD has been set at the factory to operate at 120VAC unless otherwise specified on the shipping carton. The M4FM-HD export version is configured for 240VAC operation.

Please connect your M4FM-HD to an uninterruptible power supply (UPS) to protect against power surges and brownouts.

Antenna Input Connections. Separate 75ohm F-type connector is provided on the M4FM-HD rear panel for dedicated AM and FM antennas

Audio Output Connections. Analog audio left and right outputs are on rear-panel XLR connectors with pin 1 GND, pin 2 + and pin 3 -. The digital audio output is transformer-isolated in S/PDIF format on a rear-panel XLR connector with pin 1 GND, pin 2 XFMR and pin 3 XFMR. The M4FM-HD digital audio output is 5.1 surround capable. FM Composite Output has a Frequency Response <+/- 0.25dB, Total Harmonic Distortion (IEEE 185) <0.1%, IMD (SMPTE) <0.1%, SNR (IEEE 185) >75 dB

Ethernet Connection - The M4FM-HD Ethernet Port offers the use of DaySequerra’s Webserver by connecting the M4FM-HD to any networked computer with Internet access. The use of crossover cables can be used in areas where a network connection is not possible. More information on the Webserver can be found at the end of this manual. The Ethernet port with the aid of the webserver will keep the M4FM-HD up to date on all Firmware upgrades by checking, downloading and installing with the click of the ‘Check Firmware’ button on the webserver. (An internet connection must me available for ‘Firmware Upgrade. to work. UPON RECEIVING THE UNIT IT IS ENCOURAGED TO ‘CHECK

FIRMWARE’ FROM THE WEBSERVER TO BE SURE YOUR M4FM-HD IS USING THE MOST RECENT FIRMWARE AVAILABLE.

8"

M4FM-HD User Manual

Navigation

The M4FM-HD employs a 3-button user interface. From the start ‘HomeScreen’ press the center button once. An arrow will appear next to the frequency. Use the UP/DN arrow button to toggle the Arrow on the LCD around the different fields on the HomeScreen. Press the Center button to select a field to change. The arrow will start to flash indicating that the UP/DN arrows are available to change the value of the field. Press the Center button to save and exit. To access the SYSTEM menu press and hold the center button for 3 seconds.

M4FM-HD Operating Description - Controls and Indicators

Front Panel

Figure 1.

Status

•Alarms – Bi-colored LED: Green indicates that an alarm is set. Red LED illuminates when an alarm is active. Red will flash every second when an alarm conditions are met until either the user disables the alarm or the conditions move outside of the set parameters.

•HD Locked – Blue LED illuminates when tuner has acquired OFDM (orthogonal frequency division multiplexing) portion of an HD Radium signal and digital carrier S/N > 58dB/Hz, thereby permitting HD Radium digital audio to be valid. HD is displayed in upper right hand corner of VFD when tuner has acquired OFDM portion of an HD Radium signal.

•Multicast – Blue LED illuminates when tuner has acquired OFDM of an RadioTM signal and there is at least one multicast signal present.

•RF Level – Bi-colored LED: Green indicates strong RF > 40 dB. Red indicates weak RF < 40 dB.

•Up Arrow – Momentary push UP from the Homescreen will enter the Headphone volume menu. Both arrows are used to increase and decrease the volume. From selection mode Press ENTER again to change a value in any a field indicating a blinking arrow ready. Use the UP and DOWN arrows to navigate/toggle through the available choices or range. UP Arrow button tunes the frequency up one increment while tuning to a new station, when held for three seconds it tunes faster at 1.5x speed. UP selects next stored preset station in PRESETS mode (no faster mode, one push per preset). Selects next item in other menus and is used for other functions as described herein. Holding the UP arrow while powering the unit on will restore factory settings.

!!!!!!!M4FM-HD User Manual 9"