Warranty
Standard Warranty
Datavideo equipment is guaranteed against any manufacturing
defects for one year from the date of purchase.
The original purchase invoice or other documentary evidence should
be supplied at the time of any request for repair under warranty.
Damage caused by accident, misuse, unauthorized repairs, sand, grit
or water is not covered by this warranty.
All mail or transportation costs including insurance are at the
expense of the owner.
All other claims of any nature are not covered.
Cables & batteries are not covered under warranty.
Warranty only valid within the country or region of purchase.
Your statutory rights are not affected.
Two Year Warranty
All Datavideo products purchased after 01-Oct.-2008 qualify for a
free one year extension to the standard Warranty, providing the
product is registered with Datavideo within 30 days of purchase. For
information on how to register please visit www.datavideo-tek.com or
contact your local Datavideo office or authorized Distributors
Certain parts with limited lifetime expectancy such as LCD Panels,
DVD Drives, Hard Drives are only covered for the first 10,000 hours,
or 1 year (whichever comes first).
Any second year warranty claims must be made to your local Datavideo
office or one of its authorized Distributors before the extended warranty
expires.
2
Disposal
For EU Customers only - WEEE Marking
This symbol on the product indicates that it will not be
treated as household waste. It must be handed over to
the applicable take back scheme for the recycling of
electrical and electronic equipment. For more detailed
information about the recycling of this product, please
contact your local Datavideo office.
Packing List
1 x TD -2 Tally Light
1 x MC-1 Headset / Microphone
1 x ITC-100SL Slave Unit
1 x 20m XLR to XLR Intercom Cable
1 x GPI cable
1 x 36cm Black Velcro
1 x 3.5Ø Earphone (M) to two Earphone (F) L: 17cm)
1 x ITC-100SL Carrying Case
1 x 5*30 cm Velcro
1 x Instruction Manual
3
ITC-100SL Slave Unit
XLR Connection
Connects the ITC-100SL to the ITC-100 Base Station.
Power, tally and bi-directional audio are all carried
through the same cable.
Call Button
Sends a paging message to the ITC-100 Base Station.
The channel button will flash orange and there will be an
audible tone, each time the button is pressed.
4
Bi-Color Tally LED
Will illuminate RED when the channel is LIVE and
AMBER when the channel is CUED
Talk Button
Opens up talk back communication with the ITC-100
base station, and any other active channels. Press to
activate; release to de-activate. PLEASE NOTE: It is
important to deactivate the talk channel as soon as
you have finished talking, otherwise it will remain an
open channel and become distracting and confusing
for other members of the crew.
Volume Control
Adjusts the volume of the headphones.
Mic / Headphone Socket
The ITC-100SL has both a 3.5mm and 2.5mm Mic /
Headset socket. A standard 3.5mm Mic / Headset can be
used, or a Motorola type 2.5mm Mic / headset could be
used if preferred.
5
External Tally LED Socket
An external tally display (TD-2) can be connected to the
ITC-100SL. This enables the tally light to be positioned in
a more convenient place, such as on top of the camera.
When the channel is LIVE the LED will be RED, and
when the channel is CUED the LED will be AMBER.
N.B. The Tally LED on the ITC-100SL will continue to
operate as normal when a TD-2 has been added.
Power LED
The Power LED indicates when the channel is active. If
the operator has opened the channel by pressing the
channel button 1 ~ 8, or by pressing ALL then the LED
will light up.
N.B. The tally indicator lights will continue to work
even when the Power LED is not on, and the channel
is not active.
6
Specification
INPUT
MIC /
HEADSET
SOCKET
FREQUENCY
RESPONSE
THD
S/N
TALLY OUT
SOCKET
TALLY LED
POWER LED Illuminates to indicate that power is being
OPERATING
RANGE
OPERATING
TEMP. RANGE
DIMENSION
WEIGHT
5 Pin XLR Connector
3.5mm Stereo Jack Socket for combination
Headphone / Microphone
Headset Impedance 8~600 ohms 100mW(min)
Microphone Level -67dB
2.5mm Stereo Jack Socket, for Motorola Mobile
Phone type headset / microphone
550-3.6KHz, < +/-3dB
< 3%
50dB
3.5mm Jack Socket to connect to TD-2 Tally
Indicator
Bi-Color LED – RED indicates LIVE / AMBER
Indicates CUED
received
Up to 200m between Base Station and Slave
5 ~ 45°C
114mm x 97mm x 35mm
348g
Or
7
8
Loading...