Datasheet VN1206L Datasheet (Supertex)

Page 1
Ordering Information
VN1206
N-Channel Enhancement-Mode Vertical DMOS FETs
/R
BV
DSS
BV
DGS
120V 6.0 1.0A VN1206L
DS(ON)
(max) (min) TO-92
Features
Free from secondary breakdownLow power drive requirementEase of parallelingLow CExcellent thermal stabilityIntegral Source-Drain diodeHigh input impedance and high gainComplementary N- and P-channel devices
and fast switching speeds
ISS
Applications
Motor controlsConvertersAmplifiersSwitchesPower supply circuitsDrivers (relays, hammers, solenoids, lamps,
memories, displays, bipolar transistors, etc.)
I
D(ON)
Order Number / Package
These enhancement-mode (normally-off) transistors utilize a vertical DMOS structure and Supertex’s well-proven silicon-gate manufacturing process. This combination produces devices with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inher­ent in MOS devices. Characteristic of all MOS structures, these devices are free from thermal runaway and thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired.
Package Option
Absolute Maximum Ratings
Drain-to-Source Voltage BV Drain-to-Gate Voltage BV Gate-to-Source Voltage ± 30V Operating and Storage Temperature -55°C to +150°C Soldering Temperature* 300°C
* Distance of 1.6 mm from case for 10 seconds.
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.
DSS
DGS
Note: See Package Outline section for dimensions.
1
S G D
TO-92
Page 2
Thermal Characteristics
Package ID (continuous)
*
ID (pulsed) Power Dissipation
θ
jc
θ
ja
@ TC = 25°C °C/W °C/W
TO-92 0.23A 2.0A 1W 125 170 0.23A 2.0A
*
ID (continuous) is limited by max rated Tj.
*
I
DR
Electrical Characteristics (@ 25°C unless otherwise specified)
Symbol Parameter Min Typ Max Unit Conditions
BV
DSS
V
GS(th)
I
GSS
I
DSS
I
D(ON)
R
DS(ON)
G
FS
C
ISS
C
OSS
C
RSS
t
r
t
d(ON)
t
f
t
d(OFF)
V
SD
Notes:
1. All D.C. parameters 100% tested at 25°C unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.)
2. All A.C. parameters sample tested.
Drain-to-Source Breakdown Voltage 120 V VGS = 0V, ID = 100µA Gate Threshold Voltage 0.8 2.0 V VGS = VDS, ID = 1mA Gate Body Leakage 100 nA VGS = ±15V, VDS = 0V Zero Gate Voltage Drain Current 10 VGS = 0V, VDS = Max Rating
500 µAV
= 0V, VDS = Max Rating
GS
= 125°C
T
A
ON-State Drain Current 1.0 A VGS = 10V, VDS = 10V
Static Drain-to-Source ON-State Resistance
Forward Transconductance 300 m VDS = 10V, ID = 0.5A
10 VGS = 2.5V, ID = 0.1A
6.0 VGS = 10V, ID = 0.5A
Input Capacitance 125 Common Source Output Capacitance 50 pF
VGS = 0V, VDS = 25V f = 1 MHz
Reverse Transfer Capacitance 20 Rise Time 8.0 Turn-ON Delay Time 8.0 Fall Time 12
ns
= 60V, ID = 0.4A
V
DD
R
= 25
GEN
Turn-OFF Delay Time 18 Diode Forward Voltage Drop 1.2 V ISD = 0.25A, VGS = 0V
VN1206
I
DRM
Switching Waveforms and Test Circuit
10V
INPUT
10%
0V
V
DD
OUTPUT
0V
©2001 Supertex Inc. All rights reserved. Unauthorized use or reproduction prohibited.
t
d(ON)
t
(ON)
10%
90%
t
r
90%
t
d(OFF)
t
(OFF)
t
F
90%
10%
2
PULSE
GENERATOR
R
gen
INPUT
1235 Bordeaux Drive, Sunnyvale, CA 94089
V
DD
R
L
OUTPUT
D.U.T.
11/12/01
TEL: (408) 744-0100 • FAX: (408) 222-4895
www.supertex.com
Loading...