Datasheet UM2S1030, UM2S1020, UM2S1015, UM2378, UM2376 Datasheet (CPCLARE)

...
Page 1
Features Description
Small size
Easily surface mountable
Hermetically sealed
Easily formed leads
Clare’s Ultra-Mini DyadTM is well suited for small, signal switching applications. The small size lends itself to surface mountable applications; working well on higher density PC boards. The Ultra-Mini DyadTM has sputtered ruthenium contacts and an extraordinary seal strength achieved by a patented laser sealing of the leads. In low level or dry switching environments, switches typically exceed 1 billion operations.
Applications
Proximity Sensors
Relays
Telecommunications
Automation control
Ordering Information
A complete part number is represented by the digits to the right. For example, UM2S1030 is an ULTRA-MINI DYADwith a minimum operate value of 10, and a maximum of 30. Refer to the switch operating specification charts for available ranges. Special ranges are available upon request.
Ultra-Mini Dyad
UM2 S XX XX
UM2
Standard Test Coil
UM2
Part # Coil-1
Coil Definition NARM1 CTC01
Coil Resistance 1200
Number of Turns 5,000
Wire Size 0.0399mm (AWG 46)
Bobbin Diameter (inside cell) 3.96mm
Winding Length 10.4mm
Minimum Operate Value (NI)
Surface Mount Ultra-Mini Dyad Refer to operating characteristics table for complete part number.
Maximum Operate Value (NI)
Ultra-Mini DYAD™
Part # Operate Range (NI)
UM2S1015 10 to 15
UM2S1020 10 to 20
UM2S1030 10 to 30
UM2S1520 15 to 20
UM2S1525 15 to 25
UM2S2025 20 to 25
1
Ultra-Mini DYAD™ Surface Mount
Part # Operate Range (NI)
UM2319 10 to 15
UM2315 10 to 20
UM2376 10 to 30
UM2325 15 to 20
UM2341 15 to 25
UM2378 20 to 25
1
Tolerance = ± 1.5NI
2
Full Blade Sensitivity
3
Surface Mount Switches are packaged 3,000 parts per reel
1,2,3
DS-UM2-R2
www.clare.com
1
Page 2
Ultra-Mini Dyad
UM2
Ratings (@ 25˚ C)
Parameter Min Typ Max Units
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these
Switching Voltage 175 Volts Switching Current — 0.25 Amps Carry Current — 0.50 Amps Switching Fequency 500 Hz Contact Resistance 300 m
1
Derate Linearly 1.33 mw / oC
2
Derate Linearly 3.67 mw / oC
or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for extended period may degrade the device and effect its reliability.
Specifications
PARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITS
Contact Ratings
Switching Voltage Max DC/Peak AC Resist VL - - 175 Volts Switching Current Max DC/Peak AC Resist IL - - 0.25 Amps Carry Current Max DC/Peak AC Resist IC - - 0.50 Amps Contact Rating Max DC/Peak AC Resist - - - 5 VAs Static Contact Resistance 100mV, 20mA CR - .120 0.30 Contact Material - - Ru - -
Electrical Ratings
Operate Sensitivity Full Blade Tolerance = ±1.5 NI - 10 - 30 NI Release Sensitivity Full Blade Tolerance = ±1.5 NI - 5 - 30 NI Insulation Resistance Between all isolated pins at 100V, IR 10
25˚C, 40%RH Capacitance Across Open Contacts - - 0.3 - pF Dielectric Strength Between Contacts - 200 - - VDC/peak AC Operate Time, At Nominal coil voltage, TOP - 0.4 - msec.
including bounce 30 Hz Square Wave
Release Time Zener-Diode Suppression TREL - 0.1 - msec.
Environmental Ratings
Operating Temperature TO -40 - 125 ˚C Storage Temperature TA -40 - 125 ˚C Soldering Temperature - - - 260 ˚C Vibration Resistance 10Hz-1000Hz G - - 20 Gs
1
Shock Resistance 11±1ms,
/2 Sine Wave S - - 30 Gs
9
10
11
-W
2
www.clare.com
Rev. 2
Page 3
0.89
(.035Ref)
Mechanical Dimensions
Ultra-Mini DYAD
5.89
(.232Max.)
1.93
(.076Ref)
Ultra-Mini Dyad
UM2
0.13
(.005 Ref)
0.13
(.005 Ref)
1.02
(.040 Ref)
34.4 2
(1.355)
Ultra-Mini DYAD™ SMT
6.93
(.273)
5.89
(.232 Max.)
0.09
(.004 Min)
10.16 (.400)
5o Max
10o Max
0.89
(.035 Ref)
0.89
(.035)
1.93
(.076 Ref)
7o Max
1.53
(.060 Max. Ref)
1.53
(.060 Max. Ref)
Rev. 2
Recommended Pad Sizes
Ultra-Mini DYAD SMT
2.54
(0.100)
6.76
(0.270)
www.clare.com
3.02
(0.120)
Dimensions
mm
inches
3
Page 4
Worldwide Sales Offices
CLARE LOCATIONS
Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE
Clare Switch Division 4315 Earth City Expresssway St. Louis, MO 63045 Tel: 1-314-770-1832 Fax: 1-314-770-1812
Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628
SALES OFFICES
AMERICAS
Americas Headquarters
Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE
Eastern Region
Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824
Western Region
Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE
EUROPE
European Headquarters
CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890
France
Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59
Germany
Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829
Sweden
Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371
United Kingdom
Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797
ASIA PACIFIC
Asian Headquarters
Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare re­serves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person.
Canada
Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824
Specification: PB-UM2-R2 ©Copyright 2000, Clare, Inc. Ultra-Mini Dyad, Mini Dyad, and Dyad® are trademarks of Clare, Inc. All rights reserved. Printed in USA. 3/7/01
Loading...