Datasheet NC7SU04P5, NC7SU04M5X, NC7SU04M5, NC7SU04CW, NC7SU04P5X Datasheet (Fairchild Semiconductor)
Page 1
© 2000 Fairchild Semiconductor Corporation DS012142 www.fairchildsemi.com
October 1995
Revised June 2000
NC7SU04 TinyLogic
HS Unbuffered Inverter
NC7SU04
TinyLogic
HS Unbuffered Inverter
General Description
The NC7SU04 is a singl e special purp ose CMOS Inv erter.
The inverter circuit is designed with a single unbuffered
stage to facilitate use in crystal oscillator applications. It is
not intended for use in logic inversion applications.
Advanced Silicon Gate CMOS fabrication assures high
speed and low pow er circuit operation over a broad V
CC
range. ESD protectio n diodes inherently gu ard both input
and output with respect to the V
CC
and GND rails.
Features
■ Space saving SOT23 or SC70 5-lead package
■ Unbuffered for crystal oscillator applications
■ Low Quiescent Power; I
CC
< 1 µA
■ Balanced Output Drive; 2 mA I
OL
, −2 mA I
OH
■ Broad VCC Operating Range; 2V–6V
■ Balanced Propagation Delays
■ Specified for 3V operation
Ordering Code:
Logic Symbol
IEEE/IEC
Connection Diagram
(Top View)
Pin Descriptions Function Table
H = HIGH Logic Level
L = LOW Logic Level
TinyLogic is a trademark of Fairchild Semiconductor Co rporation.
Order Number
Package Product Code
Package Descript ion Supplied As
Number Top Mark
NC7SU04M5 MA05B 7SU4 5-Lead SOT23, JEDEC MO-178, 1.6mm 250 Units on Tape and Reel
NC7SU04M5X MA05B 7SU4 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel
NC7SU04P5 MAA05A SU4 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 250 Units on Tape and Reel
NC7SU04P5X MAA05A SU4 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel
Pin Names Description
A Input
Y Output
NC No Connect
Y = A
Input Output
AY
LH
HL
Page 2
www.fairchildsemi.com 2
NC7SU04
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
(Note 2)
Note 1: Absolute maximum ratings are those values beyond which damage
to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power
supply, temperature, and ou tput/inp ut loadi ng varia bles. Fairchild does no t
recommend operat ion of circuits outside dat abook specifications.
Note 2: Unused inputs must be held HIGH or LOW. They ma y not float.
DC Electrical Characteristics
Supply Voltage (VCC) −0.5V to +7.0V
DC Input Diode Current (I
IK
)
@ V
IN
≤ −0.5V −20 mA
@ V
IN
≥ VCC +0.5V +20 mA
DC Input Voltage (V
IN
) −0.5V to VCC + 0.5V
DC Output Diode Current (I
OK
)
@ V
OUT
< −0.5V −20 mA
@ V
OUT
> VCC +0.5V +20 mA
DC Output Voltag e (V
OUT
) −0.5V to VCC + 0.5V
DC Output S ource
or Sink Current (I
OUT
) ±12.5 mA
DC V
CC
or Ground Current
per Output Pin (I
CC
or I
GND
) ±25 mA
Storage Temperature (T
STG
) −65°C to +150°C
Junction Temperature (T
J
)150°C
Lead Temperature (T
L
);
(Soldering, 10 seconds) 260
°C
Supply Voltage (V
CC
) 2.0V to 6.0V
Input Voltage (V
IN
) 0V to V
CC
Output Voltage (V
OUT
) 0V to V
CC
Operating Temperature (TA) −40°C to +85°C
Thermal Resistance (
θ
JA
)
SOT23-5 300
°C/W
SC70-5 425
°C/W
Symbol Parameter
V
CC
TA = +25°CT
A
= −40°C to +85°C
Units Conditions
(V) Min Typ Max Min Max
V
IH
HIGH Level Input Voltage 2.0 1.70 1.70
V
3.0 2.45 2.45
4.5 3.60 3.60
6.0 4.80 4.80
V
IL
LOW Level Input Voltage 2.0 0.30 0.30
V
3.0 0.50 0.50
4.5 0.90 0.90
6.0 1.20 1.20
V
OH
HIGH Level Output Voltage 2.0 1.80 2.0 1.80
V
3.0 2.5 3.0 2.50 I
OH
= −20 µA
4.5 4.00 4.5 4.00 VIN = V
IL
6.0 5.50 5.9 5.50
V
V
IN
= GND
3.0 2.68 2.82 2.63 IOH = −1.3 mA
4.5 4.18 4.33 4.13 IOH = −2 mA
6.0 5.68 5.76 5.63 IOH = −2.6 mA
V
OL
LOW Level Output Voltage 2.0 0.00 0.20 0.20
V
3.0 0.00 0.50 0.50 IOL = 20 µA
4.5 0.01 0.50 0.50 VIN = V
IH
6.0 0.04 0.50 0.50
V
VIN = V
CC
3.0 0.11 0.26 0.33 IOL = 1.3 mA
4.5 0.12 0.26 0.33 IOL = 2 mA
6.0 0.15 0.26 0.33 IOL = 2.6 mA
I
IN
Input Leakage Current 6.0 ±0.1 ±1.0 µAVIN = VCC, GND
I
CC
Quiescent Supply Current 6.0 1.0 10.0 µAVIN = VCC, GND
Page 3
3 www.fairchildsemi.com
NC7SU04
AC Electrical Characteristics
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (I
CCD
) at no output
loading and operating at 50% duty cycle. (See Figure 2.) C
PD
is related to I
CCD
dynamic operating cu rrent by the expression:
I
CCD
= (CPD)(VCC)(fIN) + (ICCstatic).
AC Loading and Waveforms
CL includes load and str ay capacitance
Input PR R = 1.0 MHz; t
W
= 500 ns
FIGURE 1. AC Test Circuit
Input = AC Waveform ;
PRR = variable; Duty Cycle = 50%
FIGURE 2. I
CCD
Test Circuit
FIGURE 3. AC Waveforms
Symbol Parameter
V
CC
TA = +25°CT
A
= −40°C to +85°C
Units Conditions Fig. No.
(V) Min Typ Max Min Max
t
PLH
, Propagation Delay 5.0 3 15 ns CL = 15 pF
Figures
1, 3
t
PHL
2.0 17 100 125
CL = 50 pF
3.0 9 27 35
ns
4.5 7 20 25
6.0 6.5 17 21
t
TLH
, Output Transition Time 5.0 4 10 ns CL = 15 pF
Figures
1, 3
t
THL
2.0 25 125 155
CL = 50 pF
3.0 16 35 45
ns
4.5 12 25 31
6.0 10 21 26
CIN Input Capacitance Open 2 10 10 pF
C
PD
Power Dissipation Capacitance 5.0 4 pF (Note 3) Figure 2
Page 4
www.fairchildsemi.com 4
NC7SU04
Tape and Reel Specification
TAPE F ORMAT
TAPE DIMENSIONS inches (millimeters)
Package Tape Number Cavity Cover Tape
Designator Section Cavities Status Status
Leader (Start End) 125 (typ) Empty Sealed
M5, P5 Carrier 250 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Leader (Start End) 125 (typ) Empty Sealed
M5X, P5X Carrier 3000 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Package
Tape Size DIM A DIM B DIM F DIM K
o
DIM P1 DIM W
SC70-5 8 mm
0.093 0.096 0.138
± 0.004 0.053 ± 0.004 0.157 0.315 ± 0.004
(2.35) (2.45) (3.5
± 0.10) (1.35 ± 0.10) (4) (8 ± 0.1)
SOT23-5 8 mm
0.130 0.130 0.138
± 0.002 0.055 ± 0.004 0.157 0.315 ± 0.012
(3.3) (3.3) (3.5
± 0.05) (1.4 ± 0.11) (4) (8 ± 0.3)
Page 5
5 www.fairchildsemi.com
NC7SU04
Tape and Reel Specification (Continu ed)
REEL DIMENSIONS inches (millimeters)
Tape
Size
ABCDN W1 W2 W3
8 mm
7.0 0.059 0.512 0.795 2.165 0.331
+ 0.059/−0.000 0.567 W1 + 0.078/−0.039
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40
+ 1.50/−0.00) (14.40) (W1 + 2.00/−1.00)
Page 6
www.fairchildsemi.com 6
NC7SU04
Physical Dimensions inches (millimeters) unless otherwise noted
5-Lead SOT23, JEDEC MO-178, 1.6mm
Package Number MA05B
Page 7
7 www.fairchildsemi.com
NC7SU04 TinyLogic
HS Unbuffered Inverter
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
Package Number MAA05A
Fairchild does not assume any responsibility for use of any circuitry described , no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are dev ic es or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provide d in the labe l ing, can be re asonably expected to result in a significant injury to the
user.
2. A critical compo nent in any com ponen t of a life s upp ort
device or system whose failure to perform can be reasonably expected to cause the failure of the l ife support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
Loading...