Datasheet KPTD-3216CGCK Datasheet (KINGBRIGHT)

3.2x1.6mm SMD CHIP LED LAMP

KPTD-3216CGCK GREEN

Features



3.2mmx1.6mm SMT LED,1.8mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



PACKAGE : 2000PCS / REEL.



LEAD AND CADMIUM FREE.

Package Dimensions

Description

The Green source color devices are made with
InGaAlP on GaAs substrate Light Emitting Diode.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.0079") unless otherwise noted.

3. Specifications are subject to change without notice.

SPEC NO: DSAA8108 REV NO: V.6 DATE: APR/08/2004 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.L.NIE

Selection Guide

Viewing

Part No. Dice Lens Type

KPTD-3216CGCK GREEN (InGaAIP) WATER CLEAR

Note:

θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

1.

Electrical / Optical Characteristics at TA=25°C

Symbol Parameter Device Typ. Max. Test ConditionsUnits

λpeak

Peak Wavelength Green 574 nm IF=20mA

Iv (mcd)
@ 20mA

Min. Typ.

70 200

Angle

2θθθθ1/2

50°

λD

∆λ1/2

Dominate Wavelength Green 570 nm IF=20mA

Spectral Line Half-width Green 20 nm IF=20mA

C Capacitance Green 15 pF VF=0V;f=1MHz

VF Forward Voltage Green 2.1 2.5 V IF=20mA

IR Reverse Current Green 10 uA VR = 5V

Absolute Maximum Ratings at T

A=25°C

Parameter Green Units

Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

SPEC NO: DSAA8108 REV NO: V.6 DATE: APR/08/2004 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.L.NIE

Green KPTD-3216CGCK

SPEC NO: DSAA8108 REV NO: V.6 DATE: APR/08/2004 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.L.NIE

-3216CGCK

KPTD
SMT Reflow Soldering Instructions

Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.

Recommended Soldering Pattern
(Units : mm)

Tape Specifications
(Units : mm)

SPEC NO: DSAA8108 REV NO: V.6 DATE: APR/08/2004 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: L.L.NIE