Page 1
1 / 2
order number: J01040A0006
UHF Straight Plug Crimp RG-213/U crimp/crimp
Technical Attributes
Cable group; cable RG-213/U
RG-213/U
Remarks crimp/crimp
Dimensions a=18.3, b=32.5
Assembly B0612
Crimp die N01003D1274
Z Ω
MIL-Std.
Mount. dim.
Product description
The UHF series is a low cost, low frequency connector with a screw coupling. The maximum usable frequency
is limited to 200 MHz, as the impedance of the connector is not controlled. Flexible cables up to 11 mm
(0.433") in diameter can be used. Soldering and crimping techniques are used for terminating these
connectors. Applications for the UHF connectors are for low-frequency communication equipment.
Mechanical Characteristics
Material: contacts CuZn39Pb3
Material: other metal parts CuZn39Pb3
© 2017 Telegärtner Karl Gärtner GmbH. Technische Änderungen vorbehalten. Technical changes reserved. www.telegaertner.com
Lerchenstr. 35, D-71144 Steinenbronn, Tel. +49 (0) 7157 125 100, Fax +49 (0) 7157 125 120, E-Mail: info@telegaertner.com
Page 2
2 / 2
Material: insulators PTFE; POM; ABS; PPE (Noryl)
Finish: Inner conductor Cu2Ag5
Finish: Outer conductor CuNi5
Finish: Other metal parts CuNi5
Climatic Characteristics
Climatic category acc. to IEC 60068 - 1 40/070/21
Electrical Characteristics
Contact resistance inner conductor ≤ 5 mΩ
Contact resistance outer conductor ≤ 5 mΩ
Insulation resistance ≥ 5 GΩ
Voltage proof 2 kVeff/50 Hz
Impedance circa 50 Ω
Working voltage ≤ 750 Veff/50 Hz
Frequency range up to 200 MHz
Standards
IEC 60 169-12
Note
Combination connectors and cable clamps can be utilised to create a further number of UHF-connector
variations.
RF cable assemblies with UHF connectors upon request.
© 2017 Telegärtner Karl Gärtner GmbH. Technische Änderungen vorbehalten. Technical changes reserved. www.telegaertner.com
Lerchenstr. 35, D-71144 Steinenbronn, Tel. +49 (0) 7157 125 100, Fax +49 (0) 7157 125 120, E-Mail: info@telegaertner.com
Loading...