Datasheet G2R-1-SNDI-24, G2R-2-SNDI-24 Specification

General-purpose Relay

LR

For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.

G2R - -

1234 5

S (S)

Whenyourorder,specifytheratedvoltage.

When ordering, add the rated coil voltage and "(S)" to the model number. Rated coil voltages are given in the coil ratings table.
Example: G2R-1-S 12 VDC

(S)

Rated coil voltage

G2R-@-S (S)

Slim and Space-saving Power Plug-in Relay

■ Reduces wiring work by 60% when combined with the

P2RF-@-PU Push-In Plus Socket
(according to actual OMRON measurements).

■ Lockable test button models available.

■ Built-in mechanical operation indicator.

■ Provided with nameplate.

■ AC type is equipped with a coil-disconnection self-diagnostic

function (LED type).

■ High switching power (1-pole: 10 A).

CSM_G2R-_-S_(S)_DS_E_1_3

Model Number Structure

Model Number Legend

1. Number of Poles

1: 1 pole
2: 2 poles

2. Terminals

S: Plug-in

3. Classification

Blank: General-purpose
N: LED indicator
D: Diode
ND: LED indicator and diode
NI: LED indicator with test button
NDI: LED indicator and diode with test button

Note: Contact your OMRON representative for Relays with gold-plated contacts.

4. Rated Coil Voltage

5. Mechanical operation indicator and Nameplate

(S): Models with mechanical operation indicator and Nameplate

Ordering Information

List of Models

Classification

General-purpose

LED indicator G2R-1-SN (S) G2R-2-SN (S)

LED indicator with test button G2R-1-SNI (S) G2R-2-SNI (S)

Diode

LED indicator and diode G2R-1-SND (S) G2R-2-SND (S)

LED indicator and diode with test button G2R-1-SNDI (S) G2R-2-SNDI (S)

Note: 1. The standard models are compliant with UL/CSA and VDE standards. Also, an EC compliance declaration has been made for combina-

tions with the P2RF-@-E, P2RF-@-S and P2RF-@-PU. The Relays bear the CE Marking.

2. Refer to Connecting Sockets, below, for applicable Socket models.

3.

AC 24, 110, 120, 230, 240
DC 6, 12, 24, 48

DC 6, 12, 24, 48

Coil ratings

SPDT DPDT

G2R-1-S (S) G2R-2-S (S)

G2R-1-SD (S) G2R-2-SD (S)

Contact form

1

G2R-@-S (S)

Accessories (Order Separately)

Connecting Sockets

Track/surface-mounting Socket Back-mounting Socket

Applicable Relay model

No. of poles Model Models Models Model

1 pole G2R-1-S (S) P2RF-05-PU

2 poles G2R-2-S (S) P2RF-08-PU

* The structure of P2RF-@-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals.

Accessories for Push-In Plus Terminal Block Sockets (P2RF-@-PU)

Short Bars

Pitch No. of poles Colors Model * Minimum order (quantity)

2

7.75 mm

15.5 mm 8 PYDN-15.5-080@

Note: Use the Short Bars for crossover wiring within one Socket or between Sockets.
* Replace the box (@) in the model number with the code for the covering color.

Labels

Model

XW5Z-P4.0LB1

3 PYDN-7.75-030@
4 PYDN-7.75-040@

20 PYDN-7.75-200@

Minimum order (sheet)

(quantity per sheet)

1 sheet (60 pieces)

Push-In Plus

Terminal Blocks

Red (R)
Blue (S)

Yellow (Y)

5

P2RF-05
P2RF-05-E

P2RF-08
P2RF-08-E

PYDN-7.75-020@

Screw terminals * PCB terminals Solder terminals

P2R-05P
P2R-057P

P2R-08P
P2R-087P

10

P2R-05A

P2R-08A

Mounting Tracks

Applicable Socket Description Model

50 cm (l) × 7.3 mm (t): PFP-50N

Mounting track

Track-connecting Socket

End plate *1 PFP-M

Spacer PFP-S

Back-connecting Socket Mounting plate *2 P2R-P

*1. When mounting DIN rail, please use End Plate (PFP-M).
*2. Used to mount several P2R-05A and P2R-08A Connecting Sockets side by side.

1 m (l) × 7.3 mm (t): PFP-100N

1 m (l) × 16 mm (t): PFP-100N2

Minimum order

(quantity)

---

10

1

2

Specifications

Coil Ratings

Rated current*

Rated voltage

50 Hz 60 Hz

24 V 43.5 mA 37.4 mA 253 Ω 0.81 1.55

110 V 9.5 mA 8.2 mA 5,566 Ω 13.33 26.83

AC

120 V 8.6 mA 7.5 mA 7,286 Ω 16.13 32.46

230 V 4.4 mA 3.8 mA 27,172 Ω 72.68 143.90

240 V 4.2 mA 3.7 mA 27,800 Ω 90.58 182.34

Coil

resistance

Coil inductance (H)

Armature

OFF

(ref. value)

Armature

ON

G2R-@-S (S)

Must
operate
voltage

80% max. 30% max. 110% 0.9 VA at 60 Hz

Must
release
voltage

% of rated voltage

Max.

voltage

Power

consumption

(approx.)

Coil inductance (H)

Rated voltage Rated current*

6 V 87.0 mA 69 Ω 0.25 0.48

12 V 43.2 mA 278 Ω 0.98 2.35

DC

24 V 21.6 mA 1,113 Ω 3.60 8.25

48 V 11.4 mA 4,220 Ω 15.2 29.82

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20% for the AC rated current

and ±10% for the DC coil resistance.

2. The AC coil resistance and inductance values are reference values only (at 60 Hz).

3. Operating characteristics were measured at a coil temperature of 23°C.

4. The maximum voltage is the maximum possible value of the voltage that can be applied to the relay coil.

It is not the maximum voltage that can be applied continuously.

Coil

resistance

(ref. value)

Armature

OFF

Armature

ON

Must
operate
voltage

70% max. 15% min. 110% 0.53 W

Must
release
voltage

% of rated voltage

Max.

voltage

Power

consumption

(approx.)

Contact Ratings

Number of poles 1 pole 2 poles

Load

Rated load

Rated carry current 10 A 5 A

Max. switching voltage 440 VAC, 125 VDC 380 VAC, 125 VDC

Max. switching current 10 A 5 A

Max. switching power

Failure rate (reference value) * 100 mA at 5 VDC 10 mA at 5 VDC

Note: P level: λ60 = 0.1 x 10-6/operation

* This value was measured at a switching frequency of 120 operations per minute.

Resistive load
(cosφ = 1)

10 A at 250 VAC;
10 A at 30 VDC

2,500 VA,
300 W

Inductive load
(cosφ = 0.4; L/R = 7 ms)

7.5 A at 250 VAC;
5 A at 30 VDC

1,875 VA,
150 W

Resistive load
(cosφ = 1)

5 A at 250 VAC;
5 A at 30 VDC

1,250 VA,
150 W

Inductive load
(cosφ = 0.4; L/R = 7 ms)

2 A at 250 VAC; 3 A at
30 VDC

500 VA,
90 W

3

G2R-@-S (S)

Characteristics

Item 1 pole 2 poles

Contact configration SPDT

Contact structure Single

Contact resistance 100 mΩ max.

Operate (set) time 15 ms max.

Release (reset) time

Max. operating
frequency

AC: 10 ms max.; DC: 5 ms max.
(w/built-in diode: 20 ms max.)

Mechanical: 18,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)

Insulation resistance 1,000 MΩ min. (at 500 VDC)

5,000 VAC, 50/60 Hz for 1 min between coil and

Dielectric strength *

contacts;
1,000 VAC, 50/60 Hz for 1 min between contacts of
same polarity

Vibration resistance

Shock resistance

Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)

Destruction: 1,000 m/s

2

Malfunction: 200 m/s2 when energized; 100 m/s2 when not energized

Mechanical: AC coil: 10,000,000 operations min.;

Endurance

DC coil: 20,000,000 operations min. (at 18,000 operations/hr)

Electrical: 100,000 operations min. (at 1,800 operations/hr under rated load)

Ambient temperature Operating: –40°C to 70°C (with no icing or condensation)

Ambient humidity Operating: 5% to 85%

Weight Approx. 20 g

Note: Values in the above table are the initial values.

* These values are relay only. Prease refer to the “Products Related to Common Sockets and DIN Tracks Data Sheet” for connecting sockets.

AC: 15 ms max.; DC: 10 ms max.
(w/built-in diode: 20 ms max.)

5,000 VAC, 50/60 Hz for 1 min between coil and contacts;
3,000 VAC, 50/60 Hz for 1 min between contacts of different polarity
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity

Approved Standards

UL 508 (File No. E41643)

Model

G2R-1-S (S) SPDT

G2R-2-S (S) DPDT

CSA 22.2 No.0, No.14
(File No. LR31928)

Model

G2R-1-S (S) SPDT

G2R-2-S (S) DPDT

Contact

form

Contact

form

Coil ratings Contact ratings

5 to 110 VDC
6 to 240 VAC

Coil ratings Contact ratings

5 to 110 VDC
6 to 240 VAC

Opera-

tions

10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)

TV-3 (NO contact only) 25 × 10

5 A, 30 VDC (resistive)
5 A, 250 VAC (general use)

TV-3 (NO contact only) 25 × 10

10 A, 30 VDC (resistive)
10 A, 250 VAC (general use)

TV-3 (NO contact only) 25 × 10

5 A, 30 VDC (resistive)
5 A, 250 VAC (general use)

TV-3 (NO contact only) 25 × 10

100 × 10

100 × 10

Opera-

tions

100 × 10

100 × 10

IEC/VDE (Certificate No. 40015012 EN 61810-1)

Contact

form

3

3

3

3

1 pole

2 poles

Coil ratings Contact ratings Operations

6, 12, 24, 48 VDC
24, 110, 120, 230,
240 VAC

6, 12, 24, 48 VDC
24, 110, 120, 230,
240 VAC

5 A, 440 VAC (cosφ = 1.0)
10 A, 250 VAC (cosφ = 1.0)
10 A, 30 VDC (0 ms)

5 A, 250 VAC (cosφ =1.0)
5 A, 30 VDC (0 ms)

100 × 10

100 × 10

3

3

LR

Number

of poles

3

3

3

3

1 pole

2 poles

Coil ratings Contact ratings Operations

5 to 110 VDC
6 to 240 VDC

5 to 110 VDC
6 to 240 VDC

10 A, 250 VAC (general use)

7.5 A, 250 VAC (PF0.4)
10 A, 30 VDC (resistive)
5A, 30VDC (L/R=7ms)

5 A, 250 VAC (general use)
2 A, 250 VAC (PF0.4)
5 A, 30 VDC (resistive)
3A, 30VDC (L/R=7ms)

100 × 10

100 × 10

3

3

4

Engineering Data

100

10

1

0.1
1 10 100 1000

100

10

1

0.1
1 10 100 1000

G2R-1-S (S)

Switching current (A)

Switching voltage (V)

G2R-2-S (S)

Switching voltage (V)

Switching current (A)

AC inductive load
(cosφ = 0.4)

AC resistive
load

DC resistive
load

DC inductive load
(L/R = 7 ms)

AC inductive load
(cosφ = 0.4)

AC resistive
load

DC resistive
load

DC inductive load
(L/R = 7 ms)

5,000

1,000

500

100

50

5,000

1,000

500

100

50

10,000

G2R-1-S (S)

Endurance (x10

3

operations)

Switching current (A)

G2R-2-S (S)

Switching current (A)

30-VDC inductive load (L/R = 7ms)

30-VDC inductive load (L/R = 7ms)

Endurance (x10

3

operations)

250-VAC/30-VDC
resistive load

250-VAC inductive load
(cosφ = 0.4)

250-VAC/30-VDC
resistive load

250-VAC
inductive load
(cosφ = 0.4)

Ambient temperature (°C)

Maximum voltage (%)

DC coil

AC coil

Maximum Switching Power

Endurance

G2R-@-S (S)

Ambient Temperature vs Maximum Coil Voltage

5

G2R-@-S (S)

G2R-1-S (S), G2R-1-SN (S), G2R-1-SNI (S)
G2R-1-SD (S), G2R-1-SND (S), G2R-1-SNDI (S)

Terminal Arrangement/Internal Connections
(Bottom View)

1

2

34

5

DC24V

201

0.5 4.75

7.5

17.5

5.25.2

35.5 max.

29 max.

13 max.

5

G2R-1-SND (S), G2R-1-SNDI (S) (DC)

G2R-1-S (S)

G2R-1-SD (S) (DC)

G2R-1-SN (S), G2R-1-SNI (S) (AC) G2R-1-SN (S), G2R-1-SNI (S) (DC)

1

2

3

4

5

2

4

5

1

3

2

4

5

1

3

1

2

3

4

5

G2R-2-S (S), G2R-2-SN (S), G2R-2-SNI (S)
G2R-2-SD (S), G2R-2-SND (S), G2R-2-SNDI (S)

Terminal Arrangement/Internal Connections
(Bottom View)

G2R-2-SND (S), G2R-2-SNDI (S) (DC)

G2R-2-S (S) G2R-2-SD (S) (DC)

G2R-2-SN (S), G2R-2-SNI (S) (AC) G2R-2-SN (S), G2R-2-SNI (S) (DC)

20

0.5

55

2.5

2.4

19.4

29 max.

35.5 max.

13 max.

6.2

7.4

8.9

1

8

234

765

234

567

1

8

234

765

1

8

234

765

1

8

1

8

234

765

Dimensions (Unit: mm)

Note: All units are in millimeters unless otherwise indicated.

SPDT Relays

DPDT Relays

6

Track/Surface Mounting Sockets

Mounting Hole

Dimensions

52.4

45

36.3

27.6

27.25

35.5

28.1

27.6

52.1

3.9

56.5 max.

15.5 max.

90 max.

(3)

(3)

Releaselever

14

12

11

A1A2

Terminal Arrangement/

Internal Connection Diagram

(Top View)

(5)

(2)

(4)

(3)

(1)

Two M4 screw
holes or
two 4-dia. holes

108

P2RF-05-PU

Note: Pull out the hooks to

mount the Relay
with screws.

Note: The numbers in

parentheses are
traditionally used
terminal numbers.

Mounting Hole

Dimensions

27.6

28.1

45

36.3

27.6

35.5

27.25

52.1

52.4

3.9

56.5 max.

15.5 max.

(3)

(3)

90 max.

Releaselever

142224

21

12

11

A1A2

Terminal Arrangement/

Internal Connection Diagram

(Top View)

(8)

(2)

(4)

(3)

(7)

(5)

(6)

(1)

Two M4 screw
holes or
two 4-dia. holes

108

P2RF-08-PU

Note: Pull out the hooks to

mount the Relay
with screws.

Note: The numbers in

parentheses are
traditionally used
terminal numbers.

Accessories for P2RF-@-PU
Short Bars

PYDN-7.75-@@ (7.75 mm)

PYDN-15.5-080@ (15.5 mm)

3.90

L

1.572.25

12

18.5

3.90

1.57

2.25

12

18.5

115.85

* Replace the box (@) in the model number with the code for the covering color.

Note: 1. Use the Short Bars for crossover wiring within one Socket or between Sockets.

2. When using short bar to coil terminals of P2RF-@@-PU, A1 terminal cannot be used.

In case crossover wiring of A1 terminal side is needed, crossover wiring using A1
terminals by wire is possible.

Short bar correspondence table

Application Pitch

No. of

poles

L (Length) Colors Model

*

Maximum

carry current

For Contact

terminals

(common)

7.75 mm

215.1

Red (R)
Blue (S)
Yellow (Y)

PYDN-7.75-020@

20 A

3 22.85 PYDN-7.75-030@

430.6 PYDN-7.75-040@

20 154.6 PYDN-7.75-200@

For Coil

terminals

15.5 mm 8 115.85 PYDN-15.5-080@

Contact terminal

(Common)

Coil terminal

A1 A2

P2RF-@@-PU Available --- ❍

G2R-@-S (S)

7

G2R-@-S (S)

39.5±0.1

P2RF-05

P2RF-08

7

4

2

35.5

19.5

30±0.05

7

4

2

35.5

19.5

30±0.05

P2RF-05-E

39.5

35.5

11.5

(11)

(14)

(12)

(A1)

(A2)

1

2

3

4

5

39.5±0.1

2

1.5

4

2

3

39.5

35.5

11.5

P2RF-08-E

8

6 3

7

2

54

(A1)

(A2)

(21)
(22)
(24)

(11)
(12)
(14)

1

2

3.2-dia.
hole

Five, M3.5 x 8

19.5 max.

4-dia. holes

30 max.

54 max.

4.2-dia. hole

71.5 max.

19.5 max.

Eight, M3.5 x 8

4-dia. holes

30 max.

54 max.

4.2-dia. hole

3.2-dia.
hole

Five, M3.5´7

85.5 max.

16.0 max.

48 max.

Note: Pin numbers in parentheses apply to DIN standard.

61 max.

Eight, M3´8

3.5-dia. hole

16.0 max.

48.0 max.

61.0
max.

Terminal Arrangement
(Top View)

Mounting Holes
(for Surface Mounting)

Terminal Arrangement
(Top View)

Mounting Holes
(for Surface Mounting)

M3 or

3.5-dia.
hole

M3 or

3.5-dia.
hole

3.5-dia.
hole

85.5
max.

M3 or 3.2-dia.
hole

M3 or 3.2-dia.
hole

Terminal Arrangement
(Top View)

Mounting Holes
(for Surface Mounting)

Terminal Arrangement
(Top View)

Mounting Holes
(for Surface Mounting)

71.5 max.

4

7±0.2

6

+0.2

−0.1

8

Mounting Height of Relay with Track/Surface Mounting Sockets

P2RF-@ P2RF-@-E

P2RF-05-PU P2RF-08-PU

G2R-@-S (S)
Relay

G2R-@-S (S)
Relay

P2RF-@-E
Socket

P2RF
Socket

66.5

62.0

67.0

70.5

G2R-@-S (S)
Relay

G2R-@-S (S)
Relay

63.6

28.1

(3.9)

63.6

28.1

(3.9)

1

47

6

4.5

15

4

3.5

1.2

1.5

7

4

4

6

4.5

15

4

7

4

7

0.3

5

5

20

1

2.8

1.5

7.5

7.5

5

5

20

(4.3)

(5)

P2R-05P (1-pole)

14.5 max.

35.5 max.

Tolerance: ±0.1

Mounting Holes

P2R-08P (2-pole)

36.5 max.

Terminal plate thickness: 0.3

14.5 max.

35.5 max.

Eight, 1.3-dia. holes

Terminal Arrangement
(Bottom View)

Mounting HolesTerminal Arrangement

(Bottom View)

Five,

1.6-dia.
holes

36.5 max.

G2R-@-S (S)

Back-connecting Sockets

9

G2R-@-S (S)

4.5

1.2

0.3

6.7

3.8

16.7

5

6

1.2

0.3

5

5

20

2.8

2.6

7.5

13.6±0.1

30.5±0.2

1.5

7.5

7.56.5

P2R-05A (1-pole)

Panel Cutout

P2R-08A (2-pole)

Five, 3 x 1.8-dia. holes

36.5 max.

Terminal plate thickness: 0.3

14.5 max.

35.5 max.

36.5 max.

Terminal plate thickness: 0.3

14.5 max.

35.5 max.

Eight, 3 x 1.2-dia. holes

Terminal Arrangement
(Bottom View)

Recommended thickness of
the panel is 1.6 to 2.0 mm

P2R-057P (1-pole)

P2R-087P (2-pole)

4.5±0.1

15±0.1

4±0.1

5

4±0.1

6±0.1

7±0.1

7.5

5

5

20

(8.1)

29.6

0.7

8.9

8.7

8.7

29.1

7.5

14 max.

37 max.

14 max.

37 max.

41 max.

Mounting Holes

Terminal Arrangement
(Bottom View)

Mounting Holes

Terminal Arrangement
(Bottom View)

Eight,

1.3-dia.
holes

Five,

1.6-dia.
holes

7.4

1

0.3

16.4

1

10.4

3.5

5

20

8.1

5

16.4

1

10.4
1

1

7.4

41 max.

3.5

6

15

4

8.75

4.5

38.0

P2R-@7P

G2R-@-S (S) Relay

P2R-@P
Socket

P2R-@A
Socket

G2R-@-S (S) Relay

P2R-@7P
Socket

G2R-@-S (S) Relay

P2R-@P P2R-@A

47.5

44.5

Mounting Height of Relay with Back-connecting Sockets

10

Mounting Tracks

PFP-100N, PFP-50N PFP-100N2

4.5

15 25

25

25

25

10

10

1,000 (500)

7.3±0.15

35±0.3

27±0.15

1

4.5

15 25 25

25

25

15

10

10

1,000

35±0.3

27

24

16

29.2

1 1.5

15 (5)

It is recommended to use a panel 1.6 to 2.0 mm thick.

PFP-M

PFP-S

50

11.5

10

6.2

1.8

1

35.5 35.3

1.8

1.3

4.8

5

16

12

44.3

34.8

10

16.5

M4 x 8 pan
head screw

90

4.5

49

42

±0.1

9

±0.1

9

±0.1

18

±0.1518±0.1518±0.15

72

±0.2

18

±0.15

R2.25
10-Ellipsehole

13.6

Squarehole

3.4

30.5

t=1.6 mm

End Plate Spacer

G2R-@-S (S)

Mounting Plate

P2R-P

Safety Precautions

Be sure to read the Common Precautions for All Relay in the website at the following URL:
http://www.ia.omron.com/.
Refer to Products Related to Common Sockets and DIN Tracks for precautions on the applicable Sockets.

@@

Refer to PYF-

Warning Indications

CAUTION

-PU/P2RF-@@-PU for precautions on Push-In Plus Terminal Block Sockets.

Indicates a potentially hazardous
situation which, if not avoided, may result
in minor or moderate injury or in property
damage.

Cation

• Do not use the test button for any purpose other than testing. Be

sure not to touch the test button accidentally as this will turn the
contacts ON. Before using the test button, confirm that circuits, the
load, and any other connected item will operate safely.

• Check that the test button is released before turning ON relay cir-

cuits.

• If the test button is pulled out too forcefully, it may bypass the mo-

mentary testing position and go straight into the locked position.

• Use an insulated tool when you operate the test button.

11

Terms and Conditions Agreement

Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.

Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at

Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or

replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence

thereof.
Performance Data.

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.

Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.

2017.11

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/

In the interest of product improvement, specifications are subject to change without notice.

(c)Copyright OMRON Corporation 2017 All Right Reserved.