Datasheet D3V-162-1A5, D3V-161-1A5, D3V-165-1C25, D3V-166M-1C25, D3V-16-1C25 Specification

Miniature Basic Switch

D3V

Reliable Basic Switch with External Lever

• Available by 0.1 A, 6 A, 11 A, 16 A and 21 A models, all with
self-cleaning contacts. 0.1 A utilizes gold alloy crossbar con­tacts for high reliability at low loads.

• Available with internally or externally fitted levers, and 2 fixing
positions for external levers.

• Conforms to EN61058-1 UL1054.

• Right-angle plunger option available in some models.

• RoHS Compliant.

Ordering Information

■ Model Number Legend

D3V-@@@@-@@@-@-@

1 2 3 4 5 6 7 89

1. Ratings

21: 20 (4) A at 250 VAC
16: 16 (3) A at 250 VAC
11: 11 (3) A at 250 VAC
6: 6 (2) A at 250 VAC
01: 0.1 A at 125 VAC

2. Contact Gap

None: 1 mm (F gap)
G: 0.5 mm (G gap)

3. Actuator

None: Pin plunger
1: Short hinge lever
2: Hinge lever
3: Long hinge lever
4: Simulated roller lever
5: Short hinge roller lever
6: Hinge roller lever

4. Hinge Position

None: Internal/Far from plunger
M: External/Far from plunger
K: External/Near plunger

5. Contact Form

1: SPDT
2: SPST-NC
3: SPST-NO

6. Terminals

A: Solder/quick-connect terminal (#187)
C2: Quick-connect terminal (#187)
C: Quick-connect terminal (#250)

(optional without surge creepage tab flush around
terminals.)

7. Maximum Operating Force

5: 1.96 N {200 gf}
4A: 1.23 N {125 gf}
4: 0.98 N {100 gf}
3: 0.49 N {50 gf}
2: 0.25 N {25 gf}

Note: These values are for the plunger models.

8. Mounting Hole Si ze

None: 3.1 mm
K: 2.9 mm

9. Special Code

None: Standard
H: High temperature (125°C)
E: Special rating: 21 (8) A
T: High temperature (200

°C)

986 Miniature Basic Switch D3V

■ Available Combinations

Model D3V-21 D3V-16 D3V-11 D3V-6 D3V-01

Rated current 21 A 16 A 11 A 6 A 0.1 A

OF 1.23 N

{125 gf}

Heat resis­tance

Standard
(85°C)

Standard
(105°C)

High tem­perature
(125°C)

High tem­perature
(200°C)

Contact

Terminals

#187 ●●

#250 ● ❍❍

#187 ●❍ ❍ ● ❍ ● ❍ ❍ ❍ ● ❍ ●

#250 ●❍ ❍ ● ❍ ● ❍ ❍ ❍ ● ❍ ●

#187 ❍❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍

#250 ❍❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍

#187 ❍❍❍❍ ❍❍

#250 ❍❍❍❍ ❍❍

G

gap

0.5 mmF1 mmG0.5 mm

Note: 1. ● : Standard

❍: Semi-standard

2. Consult OMRON for specific models with standard approval.

1.96 N

{200 gf}

0.98 N

{100 gf}

F/G

1 mm or

0.5 mm

1.96 N

{200 gf}

F

1 mmG0.5 mmF1 mmG0.5

0.98 N

{100 gf}

mm

0.49 N
{50 gf}

G

0.5 mm

1.96 N

{200 gf}

F/G

1 mm or

0.5 mm

0.98 N

{100 gf}

F

1 mmG0.5

mm

0.49 N
{50 gf}

0.5 mmF1 mmF1 mm

0.49 N

0.25 N

{50 gf}

{25 gf}

G

Miniature Basic Switch D3V 987

■ List of Models

21 A (OF: 1.23 N {125 gf})

Actuator Hinge position

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

16 A (OF: 1.96 N {200 gf})

Actuator Hinge position

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

(far from plunger)

--- D3V-21G-1@4A-∆ D3V-21G-2@4A-∆ D3V-21G-3@4A-∆
Internal D3V-21G1-1@4A-∆ D3V-21G1-2@4A-∆ D3V-21G1-3@4A-∆

External (M) D3V-21G1M-1@4A-∆ D3V-21G1M-2@4A-∆ D3V-21G1M-3@4A-∆
Internal D3V-21G2-1@4A-∆ D3V-21G2-2@4A-∆ D3V-21G2-3@4A-∆
External (M) D3V-21G2M-1@4A-∆ D3V-21G2M-2@4A-∆ D3V-21G2M-3@4A-∆
Internal D3V-21G3-1@4A-∆ D3V-21G3-2@4A-∆ D3V-21G3-3@4A-∆
External (M) D3V-21G3M-1@4A-∆ D3V-21G3M-2@4A-∆ D3V-21G3M-3@4A-∆
Internal D3V-21G4-1@4A-∆ D3V-21G4-2@4A-∆ D3V-21G4-3@4A-∆
External (M) D3V-21G4M-1@4A-∆ D3V-21G4M-2@4A-∆ D3V-21G4M-3@4A-∆
Internal D3V-21G5-1@4A-∆ D3V-21G5-2@4A-∆ D3V-21G5-3@4A-∆
External (M) D3V-21G5M-1@4A-∆ D3V-21G5M-2@4A-∆ D3V-21G5M-3@4A-∆

Internal D3V-21G6-1@4A-∆ D3V-21G6-2@4A-∆ D3V-21G6-3@4A-∆
External (M) D3V-21G6M-1@4A-∆ D3V-21G6M-2@4A-∆ D3V-21G6M-3@4A-∆

(far from plunger)

--- D3V-16-1@5-∆ D3V-16-2@5-∆ D3V-16-3@5-∆
Internal D3V-161-1@5-∆ D3V-161-2@5-∆ D3V-161-3@5-∆

External (M) D3V-161M-1@5-∆ D3V-161M-2@5-∆ D3V-161M-3@5-∆
Internal D3V-162-1@5-∆ D3V-162-2@5-∆ D3V-162-3@5-∆
External (M) D3V-162M-1@5-∆ D3V-162M-2@5-∆ D3V-162M-3@5-∆
Internal D3V-163-1@5-∆ D3V-163-2@5-∆ D3V-163-3@5-∆
External (M) D3V-163M-1@5-∆ D3V-163M-2@5-∆ D3V-163M-3@5-∆
Internal D3V-164-1@5-∆ D3V-164-2@5-∆ D3V-164-3@5-∆
External (M) D3V-164M-1@5-∆ D3V-164M-2@5-∆ D3V-164M-3@5-∆
Internal D3V-165-1@5-∆ D3V-165-2@5-∆ D3V-165-3@5-∆
External (M) D3V-165M-1@5-∆ D3V-165M-2@5-∆ D3V-165M-3@5-∆

Internal D3V-166-1@5-∆ D3V-166-2@5-∆ D3V-166-3@5-∆
External (M) D3V-166M-1@5-∆ D3V-166M-2@5-∆ D3V-166M-3@5-∆

SPDT SPST-NC SPST-NO

SPDT SPST-NC SPST-NO

Contact form

Contact form

Note: The @ in the model number is for the terminal code.

A: Solder/quick-connect terminals (#187)
C2: Quick-connect terminals (#187)
C: Quick-connect terminals (#250)
The ∆ in the model number is for the mounting hole size.
None: 3.1 mm
K: 2.9 mm

988 Miniature Basic Switch D3V

16 A (OF: 0.98 N {100 gf})

Actuator Hinge position

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

11 A (OF: 1.96 N {200 gf})

Actuator Hinge position

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

(far from plunger)

--- D3V-16-1@4-∆ D3V-16-2@4-∆ D3V-16-3@4-∆
Internal D3V-161-1@4-∆ D3V-161-2@4-∆ D3V-161-3@4-∆

External (M) D3V-161M-1@4-∆ D3V-161M-2@4-∆ D3V-161M-3@4-∆
Internal D3V-162-1@4-∆ D3V-162-2@4-∆ D3V-162-3@4-∆
External (M) D3V-162M-1@4-∆ D3V-162M-2@4-∆ D3V-162M-3@4-∆
Internal D3V-163-1@4-∆ D3V-163-2@4-∆ D3V-163-3@4-∆
External (M) D3V-163M-1@4-∆ D3V-163M-2@4-∆ D3V-163M-3@4-∆
Internal D3V-164-1@4-∆ D3V-164-2@4-∆ D3V-164-3@4-∆
External (M) D3V-164M-1@4-∆ D3V-164M-2@4-∆ D3V-164M-3@4-∆
Internal D3V-165-1@4-∆ D3V-165-2@4-∆ D3V-165-3@4-∆
External (M) D3V-165M-1@4-∆ D3V-165M-2@4-∆ D3V-165M-3@4-∆

Internal D3V-166-1@4-∆ D3V-166-2@4-∆ D3V-166-3@4-∆
External (M) D3V-166M-1@4-∆ D3V-166M-2@4-∆ D3V-166M-3@4-∆

(far from plunger)

--- D3V-11-1@5-∆ D3V-11-2@5-∆ D3V-11-3@5-∆
Internal D3V-111-1@5-∆ D3V-111-2@5-∆ D3V-111-3@5-∆

External (M) D3V-111M-1@5-∆ D3V-111M-2@5-∆ D3V-111M-3@5-∆
Internal D3V-112-1@5-∆ D3V-112-2@5-∆ D3V-112-3@5-∆
External (M) D3V-112M-1@5-∆ D3V-112M-2@5-∆ D3V-112M-3@5-∆
Internal D3V-113-1@5-∆ D3V-113-2@5-∆ D3V-113-3@5-∆
External (M) D3V-113M-1@5-∆ D3V-113M-2@5-∆ D3V-113M-3@5-∆
Internal D3V-114-1@5-∆ D3V-114-2@5-∆ D3V-114-3@5-∆
External (M) D3V-114M-1@5-∆ D3V-114M-2@5-∆ D3V-114M-3@5-∆
Internal D3V-115-1@5-∆ D3V-115-2@5-∆ D3V-115-3@5-∆
External (M) D3V-115M-1@5-∆ D3V-115M-2@5-∆ D3V-115M-3@5-∆

Internal D3V-116-1@5-∆ D3V-116-2@5-∆ D3V-116-3@5-∆
External (M) D3V-116M-1@5-∆ D3V-116M-2@5-∆ D3V-116M-3@5-∆

SPDT SPST-NC SPST-NO

SPDT SPST-NC SPST-NO

Contact form

Contact form

Note: The @ in the model number is for the terminal code.

A: Solder/quick-connect terminals (#187)
C2: Quick-connect terminals (#187)
C: Quick-connect terminals (#250)
The ∆ in the model number is for the mounting hole size.
None: 3.1 mm
K: 2.9 mm

Miniature Basic Switch D3V 989

11 A (OF: 0.98 N {100 gf})

Actuator Hinge position

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

11 A (OF: 0.49 N {50 gf})

Actuator Hinge position

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

(far from plunger)

--- D3V-11-1@4-∆ D3V-11-2@4-∆ D3V-11-3@4-∆
Internal D3V-111-1@4-∆ D3V-111-2@4-∆ D3V-111-3@4-∆

External (M) D3V-111M-1@4-∆ D3V-111M-2@4- ∆ D3V-111M-3@4-∆
Internal D3V-112-1@4-∆ D3V-112-2@4-∆ D3V-112-3@4-∆
External (M) D3V-112M-1@4-∆ D3V-112M-2@4- ∆ D3V-112M-3@4-∆
Internal D3V-113-1@4-∆ D3V-113-2@4-∆ D3V-113-3@4-∆
External (M) D3V-113M-1@4-∆ D3V-113M-2@4- ∆ D3V-113M-3@4-∆
Internal D3V-114-1@4-∆ D3V-114-2@4-∆ D3V-114-3@4-∆
External (M) D3V-114M-1@4-∆ D3V-114M-2@4- ∆ D3V-114M-3@4-∆
Internal D3V-115-1@4-∆ D3V-115-2@4-∆ D3V-115-3@4-∆
External (M) D3V-115M-1@4-∆ D3V-115M-2@4- ∆ D3V-115M-3@4-∆

Internal D3V-116-1@4-∆ D3V-116-2@4-∆ D3V-116-3@4-∆
External (M) D3V-116M-1@4-∆ D3V-116M-2@4- ∆ D3V-116M-3@4-∆

(far from plunger)

--- D3V-11G-1@3-∆ D3V-11G-2@4-∆ D3V-11G-3@3-∆
Internal D3V-11G1-1@3-∆ D3V-11G1-2@4-∆ D3V-11G1-3@3-∆

External (M) D3V-11G1M-1@3-∆ D3V-11G1M-2@3-∆ D3V-11G1M-3@3-∆
Internal D3V-11G2-1@3-∆ D3V-11G2-2@3-∆ D3V-11G2-3@3-∆
External (M) D3V-11G2M-1@3-∆ D3V-11G2M-2@3-∆ D3V-11G2M-3@3-∆
Internal D3V-11G3-1@3-∆ D3V-11G3-2@3-∆ D3V-11G3-3@3-∆
External (M) D3V-11G3M-1@3-∆ D3V-11G3M-2@3-∆ D3V-11G3M-3@3-∆
Internal D3V-11G4-1@3-∆ D3V-11G4-2@3-∆ D3V-11G4-3@3-∆
External (M) D3V-11G4M-1@3-∆ D3V-11G4M-2@3-∆ D3V-11G4M-3@3-∆
Internal D3V-11G5-1@3-∆ D3V-11G5-2@3-∆ D3V-11G5-3@3-∆
External (M) D3V-11G5M-1@3-∆ D3V-11G5M-2@3-∆ D3V-11G5M-3@3-∆

Internal D3V-11G6-1@3-∆ D3V-11G6-2@3-∆ D3V-11G6-3@3-∆
External (M) D3V-11G6M-1@3-∆ D3V-11G6M-2@3-∆ D3V-11G6M-3@3-∆

SPDT SPST-NC SPST-NO

SPDT SPST-NC SPST-NO

Contact form

Contact form

Note: The @ in the model number is for the terminal code.

A: Solder/quick-connect terminals (#187)
C2: Quick-connect terminals (#187)
C: Quick-connect terminals (#250)
The ∆ in the model number is for the mounting hole size.
None: 3.1 mm
K: 2.9 mm

990 Miniature Basic Switch D3V

6 A (OF: 0.98 N {100 gf})

Actuator Hinge position

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

6 A (OF: 0.49 N {50 gf})

Actuator Hinge position

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

(far from plunger)

--- D3V-6-1@4-∆ D3V-6-2@4-∆ D3V-6-3@4-∆
Internal D3V-61-1@4-∆ D3V-61-2@4-∆ D3V-61-3@4-∆

External (M) D3V-61M-1@4-∆ D3V-61M-2@4-∆ D3V-61M-3@4-∆
Internal D3V-62-1@4-∆ D3V-62-2@4−∆ D3V-62-3@4-∆
External (M) D3V-62M-1@4-∆ D3V-62M-2@4-∆ D3V-62M-3@4-∆
Internal D3V-63-1@4-∆ D3V-63-2@4-∆ D3V-63-3@4-∆
External (M) D3V-63M-1@4-∆ D3V-63M-2@4-∆ D3V-63M-3@4-∆
Internal D3V-64-1@4-∆ D3V-64-2@4-∆ D3V-64-3@4-∆
External (M) D3V-64M-1@4-∆ D3V-64M-2@4-∆ D3V-64M-3@4-∆
Internal D3V-65-1@4-∆ D3V-65-2@4-∆ D3V-65-3@4-∆
External (M) D3V-65M-1@4-∆ D3V-65M-2@4-∆ D3V-65M-3@4-∆

Internal D3V-66-1@4-∆ D3V-66-2@4-∆ D3V-66-3@4-∆
External (M) D3V-66M-1@4-∆ D3V-66M-2@4-∆ D3V-66M-3@4-∆

(far from plunger)

--- D3V-6G-1@3-∆ D3V-6G-2@3-∆ D3V-6G-3@3-∆
Internal D3V-6G1-1@3-∆ D3V-6G1-2@3-∆ D3V-6G1-3@3-∆

External (M) D3V-6G1M-1@3-∆ D3V-6G1M-2@ 3-∆ D3V-6G1M-3@3-∆
Internal D3V-6G2-1@3-∆ D3V-6G2-2@3-∆ D3V-6G2-3@3-∆
External (M) D3V-6G2M-1@3-∆ D3V-6G2M-2@ 3-∆ D3V-6G2M-3@3-∆
Internal D3V-6G3-1@3-∆ D3V-6G3-2@3-∆ D3V-6G3-3@3-∆
External (M) D3V-6G3M-1@3-∆ D3V-6G3M-2@ 3-∆ D3V-6G3M-3@3-∆
Internal D3V-6G4-1@3-∆ D3V-6G4-2@3-∆ D3V-6G4-3@3-∆
External (M) D3V-6G4M-1@3-∆ D3V-6G4M-2@ 3-∆ D3V-6G4M-3@3-∆
Internal D3V-6G5-1@3-∆ D3V-6G5-2@3-∆ D3V-6G5-3@3-∆
External (M) D3V-6G5M-1@3-∆ D3V-6G5M-2@ 3-∆ D3V-6G5M-3@3-∆

Internal D3V-6G6-1@3-∆ D3V-6G6-2@3-∆ D3V-6G6-3@3-∆
External (M) D3V-6G6M-1@3-∆ D3V-6G6M-2@ 3-∆ D3V-6G6M-3@3-∆

SPDT SPST-NC SPST-NO

SPDT SPST-NC SPST-NO

Contact form

Contact form

Note: The @ in the model number is for the terminal code.

A: Solder/quick-connect terminals (#187)
C2: Quick-connect terminals (#187)
C: Quick-connect terminals (#250)
The ∆ in the model number is for the mounting hole size.
None: 3.1 mm
K: 2.9 mm

Miniature Basic Switch D3V 991

01 A (OF: 0.49 N {50 gf})

Actuator Hinge position

Plunger

Short hinge lever

Hinge lever

Long hinge lever

Simulated roller lever

Short hinge roller lever

Hinge roller lever

(far from plunger)

--- D3V-01-1@3-∆ D3V-01-2@3-∆ D3V-01-3@3-∆
Internal D3V-011-1@3-∆ D3V-011-2@3-∆ D3V-011-3@3-∆

External (M) D3V-011M-1@3-∆ D3V-011M-2@3-∆ D3V-011M-3@3-∆
Internal D3V-012-1@3-∆ D3V-012-2@3-∆ D3V-012-3@3-∆
External (M) D3V-012M-1@3-∆ D3V-012M-2@3-∆ D3V-012M-3@3-∆
Internal D3V-013-1@3-∆ D3V-013-2@3-∆ D3V-013-3@3-∆
External (M) D3V-013M-1@3-∆ D3V-013M-2@3-∆ D3V-013M-3@3-∆
Internal D3V-014-1@3-∆ D3V-014-2@3-∆ D3V-014-3@3-∆
External (M) D3V-014M-1@3-∆ D3V-014M-2@3-∆ D3V-014M-3@3-∆
Internal D3V-015-1@3-∆ D3V-015-2@3-∆ D3V-015-3@3-∆
External (M) D3V-015M-1@3-∆ D3V-015M-2@3-∆ D3V-015M-3@3-∆

Internal D3V-016-1@3-∆ D3V-016-2@3-∆ D3V-016-3@3-∆
External (M) D3V-016M-1@3-∆ D3V-016M-2@3-∆ D3V-016M-3@3-∆

01 A (OF: 0.25 N {25 gf})

Actuator Hinge position

Plunger

Note: The @ in the model number is for the terminal code.

A: Solder/quick-connect terminals (#187)
C2: Quick-connect terminals (#187)
C: Quick-connect terminals (#250)
The ∆ in the model number is for the mounting hole size.
None: 3.1 mm
K: 2.9 mm

(far from plunger)

--- D3V-01-1@2-∆ D3V-01-2@2-∆ D3V-01-3@2-∆

Contact form

SPDT SPST-NC SPST-NO

Contact form

SPDT SPST-NC SPST-NO

992 Miniature Basic Switch D3V

Specifications

■ Ratings

Type Rated voltage Non-inductive load Inductive load

Resistive load Lamp load Inductive load Motor load

NC NO NC NO NC NO NC NO

D3V-21 250 VAC 21 A 3 A 12 A 4 A

8 VDC
30 VDC
125 VDC
250 VDC

D3V-16 250 VAC 16 A 2 A 10 A 3 A

8 VDC
30 VDC
125 VDC
250 VDC

D3V-11 250 VAC 11 A 1.5 A 6 A 2 A

8 VDC
30 VDC
125 VDC
250 VDC

D3V-6 250 VAC 6 A 3 A 4 A ---

8 VDC
30 VDC
125 VDC
250 VDC

D3V-01 125 VAC 0.1 A --- --- ---

8 VDC
30 VDC

Note: 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current

values of models with a contact gap of 0.5 mm (gap G).

2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).

3. Lamp load has an inrush current of 10 times the steady-state current.

4. Motor load has an inrush current of 6 times the steady-state current.

5. The ratings values apply under the following test conditions:

Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Operating frequency: 30 operations/min

21 A
14 A

0.6 A

0.3 A

16 A
10 A

0.6 A

0.3 A

11 A
6 A

0.6 A

0.3 A

6 A
6 A

0.4 A

0.3 A

0.1 A

0.1 A

5 A
5 A

0.1 A

0.05 A

4 A
4 A

0.1 A

0.05 A

3 A
3 A

0.1 A

0.05 A

3 A
3 A

0.1 A

0.05 A

--- --- ---

12 A
12 A

0.6 A

0.3 A

10 A
10 A

0.6 A

0.3 A

6 A
6 A

0.6 A

0.3 A

4 A
4 A

0.4 A

0.2 A

7 A
5 A

0.1 A

0.05 A

6 A
4 A

0.1 A

0.05 A

3 A
3 A

0.1 A

0.05 A

---

Miniature Basic Switch D3V 993

■ Characteristics

Operating speed 0.1 mm to 1 m/s (plunger models without levers)
Operating frequency Mechanical: 600 operations/min

Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance (initial values) D3V-21: 50 mΩ max.

Dielectric strength (see note 1) 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity

Vibration resistance (see note 2) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance (see note 2)

Durability (see note 3) Mechanical: 10,000,000 operations min.

Degree of protection IEC IP00
Degree of protection against electric

shock
Proof tracking index (PTI) 250
Ambient operating temperature D3V-21, D3V-01: –25°C to 85°C (with no icing)

Ambient operating humidity 85% max. (for 5°C to 35°C)
Weight Approx. 6.2 g (plunger models without levers)

Note: 1. The dielectric strength values shown in the table are for models with a Separator.

2. For plunger models, the above values apply for use at both the free position and total travel position. For lever models, they apply at the

total travel position.

3. For testing conditions, contact your OMRON sales representative.

Electrical: 60 operations/min

D3V-16, D3V-11, D3V-6: 30 mΩ max.
D3V-01, 0.49 N {50 gf}: 50 mΩ max.

2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each
terminal and non-current-carrying metal parts

Destruction: 400 m/s
Malfunction: 100 m/s

Electrical: D3V-21: 50,000 operations min.

Class I

D3V-16, D3V-11, D3V-6: –25°C to 105°C (with no icing)

0.25 N {25 gf}: 100 mΩ max.

2

{approx. 40G} max.

2

{approx. 10G} max.

D3V-16: 100,000 operations min.
D3V-11: 200,000 operations min.
D3V-6, D3V-01: 500,000 operations min.

■ Approved Standards

UL1054 (File No. E41515) CSA C22.2 No.55 (File No. LR21642)
(Only standard ratings are listed.)

Rated voltage D3V-21G D3V-16 D3V-16G D3V-11 D3V-11G D3V-6 D3V-6G D3V-01

125 VAC 21 A, 1/2 HP

(See note.)

250 VAC 21 A, 1/2 HP

(See note.)

125 VDC --- 0.6 A 0.1 A 0.6 A 0.1 A --- --- ---

250 VDC --- 0.3 A --- 0.3 A --- --- --- ---

Note: Approval projected.

EN 61058-1: 1992+A1: 1993 (License No. 119151L)

Rated voltage D3V-21G D3V-16 D3V-11 D3V- 6 D3V-01

125 VAC --- --- --- --- 0.1 A

250 VAC 20 (4) A 16 (3) A 11 (3) A 6 (2) A ---

Testing conditions: 50,000 operations, T85 (0°C to 85°C) for D3V-21/D3V-01, T105 (0°C to 105°C) for D3V-16/D3V-11/D3V-6

Rated voltage D3V-21G

250 VAC 21 (8) A

Testing conditions: 10,000 operations, T85 (0°C to 85°C)

16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP 0.1 A

16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP 6 A, 1/4 HP ---

994 Miniature Basic Switch D3V

■ Contact Specifications

Item D3V-21 D3V-16 D3V-11 D3V-6 D3V-01

Contact Specification Rivet Crossbar

Material Silver alloy Gold alloy

Gap

0.5 mm 1 mm (F gap type) or 0.5 mm (G gap type) 1.0 mm

(standard value)

Inrush current NC 50 A max. 40 A max. 24 A max. 15 A max. ---

NO

Minimum applicable load 160 mA at 5 VDC 1 mA at 5 VDC

■ Contact Form

SPDT SPST-NC SPST-NO

NC

NO

NC

NO

COM

Dimensions

Unit: mm (inch)

■ Terminals

Terminal type Solder/Quick -connect Te rminal

COM

t = 0.5
Three, solder/quick-connect
terminals (#187)

Terminal
dimensions

Note: Indicates the length to the center of the

1.6-dia. holes

(10)

2.4 dia.

(#187) (A)

(5.5)

(6.5)

2.9

6.35

3.2 (see note)

4.75±0.1

1.6 dia.

COM

Quick-connect Terminal

t = 0.5
Three, quick-connect
terminals (#187)

1.6-dia. terminal hole

(#187) (C2)

(10)

3.2

4.75±0.1

6.35

(5.5)

(6.5)

2.9

COM

Quick-connect Terminal

(#250) (C)

(4.9)

(7.7)

3.2

(12.0)

t = 0.8
Three, quick-connect
terminals (#250)

8

3.95

6.35±0.1

1.65-dia. terminal hole

Note: The table above is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For

terminal positions, refer to the above

Contact Form

.

■ Mounting Holes

Two, 3.1-dia. mounting holes or
M3 screw holes

10.3±0.1

22.2±0.1

Miniature Basic Switch D3V 995

■ Dimensions and Operating Characteristics

Note: 1. All units are in millimeters unless otherwise indicated.

2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

3. The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models incorporate terminals A and

C. These models are different from #187 models in terminal size only. Terminals A and C are omitted from the following drawings. Refer
to

Terminals

4. The following illustrations and drawings are for models with the hinge position set to external/further than plunger. Models with the hinge

position set to internal position are not shown here. For details about the internal position models, contact your OMRON sales represen­tative. Operating characteristics are the same for these two types of models.

5. The @ in the model number is for the terminal code.

6. The ∆ in the model number is for the mounting hole size.

The hole size in the following illustrations of models with a suffix “K” in the ∆ is 2.9 mm.

7. The operating characteristics are for operation in the A direction ( ).

Plunger Models

on page 995 for these terminals.

➡

D3V-21G-14-∆
D3V-16-15-∆
D3V-11-15-∆
D3V-11-14-∆
D3V-6-14-∆
D3V-6G-13-∆
D3V-01-12-∆
D3V-01-13-∆

Model D3V-21G-1@4A-∆ D3V-16-1@5-∆

OF max.
RF min.

PT max.
OT min.
MD max.

OP 14.7±0.4 mm

125 g {1.23 N}
20 g {0.20 N}

1.2 mm

1.0 mm

0.3 mm

D3V-11-1@5-∆

200 g {1.96 N}
50 g {0.49 N}

1.2 mm

1.0 mm

0.4 mm (F gap type) or 0.3 mm (G gap type)

Short Hinge Lever Models

D3V-21GM-14A-∆
D3V-161M-15-∆
D3V-111M-15-∆
D3V-111M-14-∆
D3V-61M-14-∆
D3V-6G1M-13-∆
D3V-01-12-∆
D3V-01M1-13-∆

t=0.5
Three, quick-connect
terminals (#187)

D3V-11-1@4-∆
D3V-6-1@4-∆

100 g {0.98 N}
15 g {0.15 N}

t=0.5
Three, quick-connect
terminals (#187)

A

➡

D3V-6G-1@3-∆ D3V-01-1@3-∆ D3V-01-1@2-∆

50 g {0.49 N}
5 g {0.05 N}

50 g {0.49 N}
5 g {0.05 N}

1.2 mm

1.0 mm

0.4 mm

A

➡

25 g {0.25 N}
3 g {0.03 N}

Note: Stainless-steel lever.

Model D3V-21G1M-1@4A-∆ D3V-161M-1@5-∆

OF max.

RF min.

PT max.

OT min.

MD max.

OP 15.2±0.5 mm

125 g {1.23 N}
20 g {0.20 N}

1.6 mm

0.8 mm

0.5 mm

D3V-111M-1@5-∆

200 g {1.96 N}
50 g {0.49 N}

1.6 mm

0.8 mm

0.6 mm (F gap type) or 0.5 mm (G gap type)

996 Miniature Basic Switch D3V

D3V-111M-1@4-∆
D3V-61M-1@4-∆

100 g {0.98 N}
15 g {0.15 N}

D3V-6G1M-1@3-∆ D3V-011M-1@3-∆

50 g {0.49 N}
5 g {0.05 N}

1.6 mm

0.8 mm

0.6 mm

Hinge Lever Models

D3V-21G2M-14A-∆
D3V-162M-15-∆
D3V-112M-15-∆
D3V-112M-14-∆
D3V-62M-14-∆
D3V-6G2M-13-∆
D3V-012M-13-∆

Note: Stainless-steel lever.

Model D3V-21G2M-1@4A-∆ D3V-162M-1@5-∆

OF max.
RF min.

PT max.
OT min.
MD max.

OP 15.2±1.2 mm

80 g {0.78 N}
6 g {0.06 N}

4.0 mm

1.6 mm

0.8 mm

D3V-112M-1@5-∆

125 g {1.23 N}
14 g {0.14 N}

4.0 mm

1.6 mm

1.5 mm (F gap type) or 0.8 mm (G gap type)

Long Hinge Lever Models

D3V-21G3M-14A-∆
D3V-163M-15-∆
D3V-113M-15-∆
D3V-113M-14-∆
D3V-63M-14-∆
D3V-6G3M-13-∆
D3V-013M-13-∆

t=0.5
Three, quick-connect
terminals (#187)

D3V-112M-1@4-∆
D3V-62M-1@4−∆

60 g {0.59 N}
6 g {0.06 N}

t=0.5
Three, quick-connect
terminals (#187)

A

➡

D3V-6G2M-1@3-∆ D3V-012M-1@3-∆

30 g {0.29 N}

---

4.0 mm

1.6 mm

1.5 mm

A

➡

Note: Stainless-steel lever.

Model D3V-21G3M-1@4A-∆ D3V-163M-1@5-∆

OF max.
RF min.

PT max.
OT min.
MD max.

OP 15.2±2.6 mm

45 g {0.44 N}
3 g {0.03 N}

9.0 mm

2.0 mm

2.0 mm

+2.6

15.2 mm

−3.2

D3V-113M-1@5-∆

70 g {0.69 N}
6 g {0.06 N}

9.0 mm

2.0 mm

2.8 mm (F gap type) or 2.0 mm (G gap type)

D3V-113M-1@4-∆
D3V-63M-1@4-∆

35 g {0.34 N}

---

9.0 mm

3.2 mm

2.8 mm (F gap type) or 2.0 mm (G gap
type)

D3V-6G3M-1@3-∆ D3V-013M-1@3-∆

20 g {0.20 N}

---

9.0 mm

3.2 mm

2.8 mm

Miniature Basic Switch D3V 997

Simulated Roller Lever Models

D3V-21G3M-14A-∆
D3V-164M-15-∆
D3V-114M-15-∆
D3V-114M-14-∆
D3V-64M-14-∆
D3V-6G4M-13-∆
D3V-014M-13-∆

Note: Stainless-steel lever.

Model D3V-21G4M-1@4A-∆ D3V-164M-1@5-∆

OF max.
RF min.

PT max.
OT min.
MD max.

OP 18.7±1.2 mm

85 g {0.83 N}
7 g {0.07 N}

4.0 mm

1.6 mm

1.4 mm

D3V-114M-1@5-∆

125 g {1.23 N}
14 g {0.14 N}

4.0 mm

1.6 mm

1.5 mm (F gap type) or 0.8 mm (G gap type)

Short Hinge Roller Lever Models

D3V-21G5M-14A-∆
D3V-165M-15-∆
D3V-115M-15-∆
D3V-115M-14-∆
D3V-65M-14-∆
D3V-6G5M-13-∆
D3V-015M-13-∆

t=0.5
Three, quick-connect
terminals (#187)

D3V-114M-1@4-∆
D3V-64M-1@4-∆

60 g {0.59 N}
6 g {0.06 N}

A

➡

D3V-6G4M-1@3-∆ D3V-014M-1@3-∆

30 g {0.29 N}

---

4.0 mm

1.6 mm

1.5 mm

A

➡

Note: 1. Stainless-steel lever.

2. Oilless polyacetal resin roller.

Model D3V-21G5M-1@4A-∆ D3V-165M-1@5-∆

OF max.
RF min.

PT max.
OT min.
MD max.

OP 20.7±0.6 mm

145 g {1.42 N}
20 g {0.2 N}

1.6 mm

0.8 mm

0.5 mm

D3V-115M-1@5-∆

240 g {2.35 N}
50 g {0.49 N}

1.6 mm

0.8 mm

0.6 mm (F gap type) or 0.5 mm (G gap type)

t=0.5
Three, quick-connect
terminals (#187)

D3V-115M-1@4-∆
D3V-65M-1@4-∆

120 g {1.18 N}
15 g {0.15 N}

D3V-6G5M-1@3-∆ D3V-015M-1@3-∆

60 g {0.59 N}
6 g {0.06 N}

1.6 mm

0.8 mm

0.6 mm

998 Miniature Basic Switch D3V

Hinge Roller Lever Models

D3V-21G6M-14A-∆
D3V-166M-15-∆
D3V-116M-15-∆
D3V-116M-14-∆
D3V-66M-14-∆
D3V-6G6M-13-∆
D3V-016M-13-∆

Note: 1. Stainless-steel lever.

2. Oilless polyacetal resin roller.

Model D3V-21G6M-1@4A-∆ D3V-166M-1@5-∆

OF max.
RF min.

PT max.
OT min.
MD max.

OP 20.7±1.2 mm

80 g {0.79 N}
5 g {0.05 N}

4.0 mm

1.6 mm

0.8 mm

D3V-116M-1@5-∆

125 g {1.23 N}
14 g {0.14 N}

4.0 mm

1.6 mm

1.5 mm (F gap type) or 0.8 mm (G gap type)

t=0.5
Three, quick-connect
terminals (#187)

D3V-116M-1@4-∆
D3V-66M-1@4-∆

60 g {0.59 N}
6 g {0.06 N}

A

➡

D3V-6G6M-1@3-∆ D3V-016M-1@3-∆

30 g {0.29 N}

---

4.0 mm

1.6 mm

1.5 mm

Miniature Basic Switch D3V 999

Precautions

■ Cautions

Handling

Be careful not to drop the switch. Doing so may cause damage to the
switch’s internal components because it is designed for a small load.

■ Correct Use

Mounting

Use two M3 mounting screws with an appropriate screwdriver to
mount the switch. Tighten the screws to a torque of 0.39 to

0.59 N • m {4 to 6 kgf • cm}.

Mounting Direction

Mount lever-operated switches with a maximum operating force of

0.49 N in a direction where the actuator weight will not be applied to
the switch. Since the switch is designed for a small load, its resetting
force is small. Therefore, resetting failure may occur if unnecessary
load is applied to the switch.

Insulation Distance

According to EN61058-1, the minimum insulation thickness for this
switch should be 1.1 mm and minimum clearance distance between
the terminal and mounting plate should be 1.9 mm. If the insulation
distance cannot be provided in the product incorporating the switch,
either use a switch with insulation barrier or use a Separator to
ensure sufficient insulation distance.

Using Micro Loads

Using a model for ordinary loads to open or close the contact of a
micro load circuit may result faulty contact. Use models that operate
in the following range. However, even when using micro load models
within the operating range shown below, if inrush current occurs
when the contact is opened or closed, it may increase contact wear
and so decrease life expectancy. Therefore, insert a contact protec­tion circuit where necessary.

The minimum applicable load is the N-level reference value. This
value indicates the malfunction reference level for the reliability level
of 60% (λ 60). The equation, λ 60 = 0.5 × 10
that the estimated malfunction rate is less than
1/2,000,000 operations with a reliability level of 60%.

Voltage (V)

Operating range
for micro load
models D3V-01

Inoperable
range

−6

Operating
range for
general­load models

/operations indicates

Current (mA)

Solder Terminal Approval Conditions

Use of soldering iron for normal soldering is acceptable.
Soldering hook holes version available.

Soldering terminal types 1 and 2 are met.

1000 Miniature Basic Switch D3V

MEMO

Miniature Basic Switch D3V 1001

Terms and Conditions of Sale

e

of

d

d.
N,
L­S.

E

IR

of
h-

li­er
n-

nt
all
or

e

b-

of

t.
e

s,
n-

g

L,

F

-

IN

in

n
d

d

s-

s
in
at
le
at
ts

is

to

d-

g

p­ri-

d
ht

er
er
lli-

ts

r.

er
or

n

y
ts

d

1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotations, acknowledgments, invoices, purchase orders and other
documents, whether electronic or in writing, relating to the sale of products or
services (collectively, the "Products") by Omron Electronic Components LLC
("Seller"). Seller hereby objects to any terms or conditions proposed in
Buyer's purchase order or other documents which are inconsistent with, or in
addition to, these Terms.

2. Prices; Payment. All prices stated are current, subject to change without
notice by Seller. Buyer agrees to pay the price in effect at time of shipment.
Payments for Products received are due net 30 days unless otherwise stated
in the invoice.

3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.

4. Currencies. If the prices quoted herein are in a currency other than U.S. dol­lars, Buyer shall make remittance to Seller at the then current exchange rate
most favorab le to Seller and which is available on the due date; provided that if
remittance is not made when due, Buyer will convert the amount to U.S. dol­lars at the then current exchange rate most favorable to Seller available during
the period between the due date and the date remittance is actually made.

5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor­tation or sale of the Products.

6. Taxes

7. Financial

8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation

9. Force Majeure. Seller shall not be liable for any delay or failure in delivery

10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:

11. Claims

. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Products sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.

. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Seller may (without liabi lity
and in addition to other remedies) cancel any unshipped portion of Products
sold hereunder and stop any Products in transit until Buyer pays all amounts,
including amounts payable hereunder, whether or not then due, which are
owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.

unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.

resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.

1. Shipments shall be by a carrier selected by Seller;

2. Such carrier shall act as the agent of Buyer and delivery to such carrier

shall constitute delivery to Buyer;

3. All sales and shipments of Products shall be FOB shipping point (unless

otherwise stated in writing by Seller), at which point title to and all risk of
loss of the Products shall pass from Seller to Buyer, provided that Seller
shall retain a security interest in the Products until the full purchase price is
paid by Buyer;

4. Delivery and shipping dates are estimates only.

5. Seller will package Products as it deems proper for protection against

normal handling and extra charges apply to special conditions.

. Any claim by Buyer against Seller for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Seller within 30 days of receipt of shipment and include the original trans­portation bill signed by the carrier noting that the carrier received the Products
from Seller in the condition claimed.

12. Warranties
Products will be free from defects in materials and workmanship fo r a period
twelve months from the date of sale by Seller (or such other period expresse
in writing by Seller). Seller disclaims all other warranties, express or implie
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATIO
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABI
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT TH
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THE
INTENDED USE. Seller further disclaims all warranties and responsibility
any type for claims or expenses based on infringement by the Products or ot
erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole ob
gation hereunder shall be to replace (in the form originally shipped with Buy
responsible for labor charges for removal or replacement thereof) the no
complying Product or, at Seller's election, to repay or credit Buyer an amou
equal to the purchase price of the Product; provided that in no event sh
Seller be responsible for warranty, repair, indemnity or any other claims
expenses regarding the Products unless Seller's analysis confirms that th
Products were properly handled, stored, installed and maintained and not su
ject to contamination, abuse, misuse or inappropriate modification. Return
any Products by Buyer must be approved in writing by Seller before shipmen
Seller shall not be liable for the suitability or unsuitability or the results from th
use of Products in combination with any electrical or electronic component
circuits, system assemblies, or any other materials or substances or enviro
ments. Any advice, recommendations or information given orally or in writin
are not to be construed as an amendment or addition to the above warranty.

13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIA
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS O
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED
CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further,
no event shall liability of Seller exceed the individual price of the Product o
which liability is asserted.

14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates an
its employees from and against all liabilities, losses, claims, costs an
expenses (including attorney's fees and expenses) related to any claim, inve
tigation, litigation or proceeding (whether or not Seller is a party) which arise
or is alleged to arise from Buyer's acts or omissions under these Terms or
any way with respect to the Products . Without limiting the foregoing, Buyer (
its own expense) shall indemnify a nd hold h armless Seller and def end or sett
any action brought against Seller to the extent that it is based on a claim th
any Product made to Buyer specifications infringed intellectual property righ
of another party.

15. Property; Confidentiality . The intellectual property embodied in the Products
the exclusive property of Seller and its affiliates and Buyer shall not attempt
duplicate it in any way without the written permission of Seller. Notwithstan
ing any charges to Buyer for engineering or tooling, all engi neering and toolin
shall remain the exclusive property of Seller. All i nformation and materials su
plied by Seller to Buyer relating to the Products are confidential and prop
etary, and Buyer shall limit distribution thereof to its trusted employees an
strictly prevent disclosure to any third party.

16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any rig
and no course of dealing between Buyer and Seller shall operate as a waiv
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereund
without Seller's written consent. (c) Law. These Ter ms are governed by I
nois law (without regard to conflict of law principles). Federal and state cour
in Illinois shall have exclusive jurisdiction for any dispute hereunde
(d) Amendment. These Terms constitute the entire agreement between Buy
and Seller relating to the Products, and no provision may be changed
waived unless in writing signed by the parties. (e) Sev er ability. If any provisio
hereof is rendered ineffective or invalid, such provision shall not invalidate an
other provision. (f) Setoff. Buyer shall have no right to set off any amoun
against the amount owing in respect of this invoice.. (g) Definitions. As use
herein, "including" means "including without limitation".

. (a) Exclusive Warranty. Seller's exclusive warranty is that th

Certain Precautions on Specifications and Use

s a

ty.

re-

to

be

c-
d,
a-
e-
ur
n-

lly

ed

est

he

b-

ntil

ur

1. Suitability for Use. Seller shall not be responsible for conformity with any stan­dards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will pro­vide applicable third party certification documents identifying ratings and limita­tions of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the P roduct in combi­nation with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the partic­ular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non­exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii)Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to

separate industry or government regulations.
(iii)Use in consumer products or any use in significant quantities.
(iv)Systems, machines and equipment that could present a risk to life or

property. Please kno w and obse rve all prohibi tio ns of use applicable to this

product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRE SS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Seller shall not be responsible for the user's
programming of a programmable product, or any consequence thereof.

3. Performance Data. Performance data given in this publication is provided a

guide for the user in determining suitability and does not constitute a warran
It may represent the result of Seller's test co nditions, and the users must cor
late it to actual application requirements. Actual performance is subject
Seller's Warranty and Limitations of Liability.

4. Change in Specifications. Product specifications and accessories may

changed at any time based on improvements and other reasons. It is our pra
tice to change part numbers when published ratings or features are change
or when significant construction changes are made. However, some specific
tions of the Product may be changed without any notice. When in doubt, sp
cial part numbers may be assigned to fix or establish key specifications for yo
application. Please consult with your Seller representative at any time to co
firm actual specifications of purchased Product.

5. Errors and Omissions. The information in this publication has been carefu

checked and is believed to be accurate; however, no responsibility is assum
for clerical, typographical or proofreading errors, or omissions.

6. RoHS Compliance

of our knowledge as of the date of this publication, with the requi rements of t
European Union's Directive on the Restriction of certain Hazardous Su
stances ("RoHS"), although the requirements of RoHS do not take effect u
July 2006. These requirements may be subject to change. Please consult o
website for current information.

. Where indicated, our products currently comply , to the b

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.components.omron.com – under the “About Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

OMRON ELECTRONIC
COMPONENTS LLC

55 E. Commerce Drive, Suite B
Schaumburg, IL 60173

OMRON CANADA, INC.

885 Milner Avenue
Toronto, Ontario M1B 5V8

416-286-6465

OMRON ON-LINE

Global - http://www.omron.com
USA - http://www.components.omron.com
Canada - http://www.omron.ca

847-882-2288

Cat. No. JB301-E3-01

3/05 Specifications subject to change without notice

Printed in USA